2007-2013 Nissan Altima Sedan Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $430.85. Current price is $319.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2007-2013 Nissan Altima Sedan
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Nissan Altima and Maxima (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2007, 2008, 2009, 2010, 2011, 2012, 2013 Nissan Altima Sedan Class 1 Trailer Hitch, 1-1/4" Receiver, Select Nissan Altima, Maxima
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2013 | Nissan Altima | Sedan |
Yes, the 2007-2013 Nissan Altima Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11352-001) is designed to fit the 2007-2013 Nissan Altima.
The 2007-2013 Nissan Altima Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11352-001) fits the following vehicles: 2007-2013 Nissan Altima. Always verify your specific year, make, and model before ordering.
The 2007-2013 Nissan Altima Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11352-001) fits 2007-2013 Nissan Altima models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2007-2013 Nissan Altima Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11352-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 11352 is designed for Nissan Maxima Sedan and Altima Sedan, including Hybrid models. It is compatible with ballmount #55001 or #45501.
The gross load capacity is 2,000 lbs trailer weight and 200 lbs tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The kit includes: one 1/2" fishwire, four 0.250 x 1.00 x 3.00" square hole spacers (CM-SP6), four 1/2-13 UNC Grade 8 carriage bolts (10-10300), and four 1/2-13 UNC Grade 8 serrated flange nuts (20-00062).
Yes, exhaust removal is required. You must remove the exhaust flange nuts and any ground wire from the muffler, then pull each exhaust pipe/muffler assembly toward the rear of the car until the exhaust hanger clears the rubber isolator. The exhaust is reinstalled after the hitch is secured.
Yes, drilling is required. You must drill out the rivets securing the heat shields to the frame rails and enlarge the existing holes in the frame rails to allow the CM-SP6 spacer and carriage bolt to pass through. The manual does not specify the exact enlargement dimensions.
A fishwire is a flexible wire tool included in the kit (1/2" fishwire). It is used to route the 1/2-13 carriage bolt and CM-SP6 spacer through the enlarged hole into the existing rearmost hole in each frame rail. The fishwire is then reversed to pull the hardware into position before the hitch is raised and secured with flange nuts.
All hardware must be torqued to 110 lb.-ft.
Yes, if present, the underbody panel on the spare tire well may require removal. If removed, you must reattach the bumper cover to the two metal tabs using the push button fasteners and return the panel to the vehicle owner.
Non-trailer loads can be carried, but all non-trailer loads applied to this product must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Yes, the Curt 11352 is designed for Nissan Maxima and Altima Sedans, including Hybrid models. It works with ballmount #55001 or #45501.
All fasteners must be torqued to 110 lb.-ft.
Gross load capacity is 2,000 lbs trailer weight and 200 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
Yes, all non-trailer loads must be supported by auxiliary stabilizing straps, or the warranty is voided.
On Sale Today
Original price was $434.85. Current price is $327.08.You save $107.77 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.