Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2008-2011 Subaru Impreza Hatchback, quad exhaust
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Subaru Impreza (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2008, 2009, 2010, 2011 Subaru Impreza Hatchback, quad exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Subaru Impreza
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2011 | Subaru Impreza | Hatchback, quad exhaust |
The 2008-2011 Subaru Impreza Hatchback, quad exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-111203-001) fits the following vehicles: 2008-2011 Subaru Impreza. Always verify your specific year, make, and model before ordering.
The 2008-2011 Subaru Impreza Hatchback, quad exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-111203-001) fits 2008-2011 Subaru Impreza models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2008-2011 Subaru Impreza Hatchback, quad exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-111203-001) is designed to fit the 2008-2011 Subaru Impreza.
The 2008-2011 Subaru Impreza Hatchback, quad exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-111203-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 11120 is designed for 2011-Current Subaru Impreza WRX Hatchback including STI models. However, some trim levels with high-end exhaust systems may not be compatible, so verify fit before completing fascia trimming.
Some trim levels with high-end exhaust systems may not be compatible with this hitch. The manual recommends checking fit prior to completing fascia trimming. If you have a high-end exhaust system, contact CURT Technical Support at 800.798.0813 before purchasing to confirm compatibility.
The hitch is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
This hitch is designed for use with ballmount #55001 or #45501. Euro mount options are available: #45571 (1 7/8" ball) and #45572 (2" ball).
Required tools are: pry bar, screwdriver, 10 mm socket, 11/16" socket, ratchet, marker, utility knife, torque wrench, and tape measure. Safety glasses should be worn at all times during installation.
The hitch includes: (4) 7/16-14 x 1 1/2" carriage bolts, (4) .250 x .88 x 2.25" square hole spacers (CM-SP2), (4) 7/16-14 hex flange nuts, and (2) 7/16" fishwires.
Yes, the exhaust must be lowered by removing (5) exhaust hangers as the first installation step. Be sure to support the exhaust to avoid possible damage during this process.
Yes, fascia trimming is required. The trim dimensions are approximately 4 inches from the center line and 1 5/8 inches from the center line (see trim diagram). Check fit prior to completing trim, as dimensions are approximate.
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Fishwire is a technique to route fasteners through confined spaces. For this hitch: (1) Reverse fishwire a 7/16" carriage bolt and CM-SP2 spacer into each frame rail, and (2) Fishwire (2) 7/16" carriage bolts and (2) CM-SP2 spacers into the bumper beam through access holes. Leave fishwires attached to hardware to prevent loss in the beam. Thread fishwires through appropriate mounting holes on the hitch and raise the hitch into position.
Yes. Remove (2) brackets which hold the fascia to the vehicle in step 2. These brackets will be reinstalled in step 9 after the hitch is torqued into position.
All 7/16" hardware (carriage bolts and hex flange nuts) must be torqued to 70 ft-lbs.
Non-trailer loads (wheel-less loads) can be carried on this hitch, but all such loads must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. CURT recommends the use of 18050 stabilizing straps for all non-trailer loads.
Periodically check this receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a critical maintenance step to ensure safe operation.
The manual recommends periodically checking this receiver hitch to ensure that all fasteners are tight and that all structural components are sound. Regular inspection is important for safe towing operation.
Yes, it fits 2011-Current Subaru Impreza WRX Hatchback including STI. Some high-end exhaust systems may not be compatible—verify fit before trimming fascia.
2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Pry bar, screwdriver, 10 mm and 11/16" sockets, ratchet, marker, utility knife, torque wrench, and tape measure. Safety glasses required.
Yes. Trim approximately 4 inches and 1 5/8 inches from center line (see trim diagram). Check fit before completing trim.
Yes. Remove (5) exhaust hangers and support the exhaust to avoid damage. This is the first installation step.
All 7/16" carriage bolts and hex flange nuts must be torqued to 70 ft-lbs.
Yes, but all non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $389.85. Current price is $292.92.You save $96.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.