Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2008-2011 Subaru Impreza Hatchback, single exhaust
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Subaru Impreza (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2008, 2009, 2010, 2011 Subaru Impreza Hatchback, single exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Subaru Impreza
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2011 | Subaru Impreza | Hatchback, single exhaust |
The 2008-2011 Subaru Impreza Hatchback, single exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113153-001) fits the following vehicles: 2008-2011 Subaru Impreza. Always verify your specific year, make, and model before ordering.
Yes, the 2008-2011 Subaru Impreza Hatchback, single exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113153-001) is designed to fit the 2008-2011 Subaru Impreza.
The 2008-2011 Subaru Impreza Hatchback, single exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113153-001) fits 2008-2011 Subaru Impreza models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2008-2011 Subaru Impreza Hatchback, single exhaust Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113153-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt hitch 113153 is designed for Subaru Impreza Wagon, WRX Wagon, and Outback Sport Wagon models with single exhaust. This hitch is designed for use with Ballmount #55001 or #45501. Verify your vehicle has single exhaust, as this hitch is not compatible with dual exhaust systems.
The gross load capacity when used as a weight-carrying hitch is 2,000 lbs trailer weight and 200 lbs tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Always verify your vehicle's towing limits before towing.
Required tools are: 3/8" drive ratchet, 11/16" 3/8" drive socket, 3/4" 3/8" drive socket, die grinder with rasp bit, and 3/8" drive torque wrench. The die grinder with rasp bit is needed to enlarge the access hole as necessary during installation.
The kit includes: two 1/2-13 x 1 1/2" carriage bolts, two 7/16-14 x 1 1/2" carriage bolts, two .250 x 1.00 x 3.00" square hole spacers (CM-SP6), two .250 x 1.00 x 2.50" square hole spacers (CM-SP11), two .250 x 1.50 x 2.00" round hole spacers (CM-SP16), two HFN 1213 hex flange nuts, two 7/16-14 hex flange nuts, one 7/16" fishwire, one 1/2" fishwire, and one reverse fishwire for 1/2" fasteners.
No, you do not need to remove the exhaust completely. Instead, lower the exhaust by unhooking the four rear exhaust hangers. The exhaust is then raised back up simultaneously with the hitch during installation to align the mounting holes.
No drilling is required. However, you may need to enlarge the existing access holes in the frame rails using a die grinder with rasp bit to fit the fishwires and fasteners through.
1. Lower the exhaust by unhooking the four rear exhaust hangers. Remove the four plugs in the frame rails and discard. 2. Fishwire the 7/16" carriage bolts and spacers into position first, then reverse fishwire the 1/2" carriage bolts and spacers (enlarge access hole as necessary). 3. Raise the hitch and exhaust simultaneously to align the holes in the hitch with the bolts. Use 1.50" x 2.00" spacers to level the hitch as necessary. 4. Install remaining supplied hardware. 5. Torque all 7/16" fasteners to 70 lb-ft and all 1/2" fasteners to 110 lb-ft.
Torque all 7/16" fasteners to 70 lb-ft and all 1/2" fasteners to 110 lb-ft. Use a 3/8" drive torque wrench to achieve these specifications.
Spacers are used to level the hitch on the vehicle. The kit includes three types: .250 x 1.00 x 3.00" square hole spacers (CM-SP6), .250 x 1.00 x 2.50" square hole spacers (CM-SP11), and .250 x 1.50 x 2.00" round hole spacers (CM-SP16). Use the 1.50" x 2.00" round hole spacers to level the hitch as necessary during installation.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain safe operation and prevent loosening of components during use.
Curt hitch 113153 is designed for use with Ballmount #55001 or #45501.
Fishwires are used to guide the carriage bolts and spacers into position through the frame rails before the hitch is raised and aligned. The 7/16" fasteners are fishwired first, followed by reverse fishwiring of the 1/2" fasteners. This technique allows the bolts to be positioned without pushing them into the frame.
Yes, for Impreza Wagon, WRX Wagon, and Outback Sport Wagon with single exhaust. Verify your vehicle has single exhaust and use Ballmount #55001 or #45501.
2,000 lbs trailer weight and 200 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
No drilling required, but you may need to enlarge access holes with a die grinder and rasp bit.
No, lower the exhaust by unhooking four rear hangers, then raise it back up with the hitch during installation.
Torque 7/16" fasteners to 70 lb-ft and 1/2" fasteners to 110 lb-ft using a 3/8" drive torque wrench.
3/8" drive ratchet, 11/16" and 3/4" sockets, die grinder with rasp bit, and 3/8" drive torque wrench.
On Sale Today
Original price was $407.85. Current price is $388.89.You save $18.96 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.