Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2009-2015 Toyota Venza All, Including AWD
Whatever the next checkpoint is on your adventure -- whether it's getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Toyota Venza (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4" receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2009, 2010, 2011, 2012, 2013, 2014, 2015 Toyota Venza All, Including AWD Class 2 Trailer Hitch, 1-1/4" Receiver, Select Toyota Venza
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2015 | Toyota Venza | All, Including AWD |
The 2009-2015 Toyota Venza All, Including AWD Class 2 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12341-001) fits the following vehicles: 2009-2015 Toyota Venza. Always verify your specific year, make, and model before ordering.
The 2009-2015 Toyota Venza All, Including AWD Class 2 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12341-001) fits 2009-2015 Toyota Venza models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2009-2015 Toyota Venza All, Including AWD Class 2 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12341-001) is designed to fit the 2009-2015 Toyota Venza.
The 2009-2015 Toyota Venza All, Including AWD Class 2 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12341-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 12341 is designed for 2009-Current Toyota Venza Crossover models. Before purchasing, verify your vehicle matches this application and confirm your vehicle's towing capacity with your manufacturer to ensure it meets the hitch's 3,500 lbs trailer weight and 350 lbs tongue weight rating.
Yes, the hitch is compatible with all-wheel-drive Venza models. However, the installation procedure differs: you must remove the two sway bar brackets before installation and reinstall them using CM-SP50 spacer blocks and the existing nuts on the lower mounts during step 4.
The CURT 12341 is rated for a maximum of 3,500 lbs trailer weight and 350 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
You will need: 12 mm, 14 mm, and 17 mm sockets; a 14 mm deep socket; a swivel extension; a 12-inch extension; a ratchet; and a torque wrench. Safety glasses must be worn at all times during installation.
No, drilling is not required. The hitch uses existing weld nuts in the vehicle frame for fastening.
Two people may be required to ease installation, though the manual does not state this is mandatory. If you are hesitant to undertake the installation on your own, you can contact an authorized CURT installer for assistance.
1. If all-wheel-drive, remove the two sway bar brackets and save the existing nuts. 2. Remove stickers covering the four weld nuts in the frame rail. 3. Lower the exhaust by removing the four hex flange bolts from the isolator hanger brackets and save them. 4. Raise the hitch and install three 10 mm bolts with conical toothed washers per side into the existing weld nuts. If all-wheel-drive, reinstall sway bar brackets using CM-SP50 spacer blocks and existing nuts. 5. Torque all M10 hardware to 45 ft-lbs. 6. Raise the exhaust and secure isolator mounts using the bolts removed in step 3.
The exhaust must be lowered to provide clearance for raising the hitch into position. In step 3, you remove the four hex flange bolts securing the isolator hanger brackets to the frame. After the hitch is installed and torqued, the exhaust is raised back into position and the isolator mounts are secured with the same bolts in step 6.
All M10 hardware must be torqued to 45 ft-lbs. This includes the six 10 mm bolts (three per side) that secure the hitch to the vehicle frame weld nuts.
The kit includes: six M10x1.25x35 Class 10.9 hex head cap screws (part 10-10298), six 7/16-inch S-CON washers (part 30-00163), and two 0.250 x 1.00 x 1.50-inch round hole spacer blocks (part CM-SP50). The spacer blocks are used only on all-wheel-drive models for the sway bar bracket reinstallation.
Yes. In step 1, save the existing nuts from the sway bar brackets (all-wheel-drive models only) for reuse in step 4. In step 3, save the four hex flange bolts from the exhaust isolator hanger brackets for reuse in step 6.
All non-trailer (wheel-less) loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. For more information, see the CURT catalog or visit www.curtmfg.com.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
The CURT 12341 is designed for use with ball mount part number D-55001.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, it fits 2009-Current Toyota Venza Crossover models. Verify your vehicle's towing capacity meets the hitch rating of 3,500 lbs trailer / 350 lbs tongue weight.
No, no drilling is required. The hitch bolts into existing weld nuts in the vehicle frame.
You need 12, 14, and 17 mm sockets, a 14 mm deep socket, swivel extension, 12-inch extension, ratchet, and torque wrench. Safety glasses are required.
Torque all M10 hardware to 45 ft-lbs.
Maximum 3,500 lbs trailer weight and 350 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, you must remove four hex flange bolts from the exhaust isolator hanger brackets in step 3 to lower the exhaust for hitch clearance, then raise and resecure it in step 6.
On Sale Today
Original price was $410.85. Current price is $311.08.You save $99.77 (24%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.