Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2017 Buick Regal
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2011-2017 Buick Regal All
Whatever the next checkpoint is on your adventure -- whether it's getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Buick LaCrosse, Buick Regal, Cadillac XTS, Chevy Impala, Chevy Malibu and Chevy Malibu Limited (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4" receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2011, 2012, 2013, 2014, 2015, 2016, 2017 Buick Regal All Class 2 Hitch, 1-1/4" Receiver, Select LaCrosse, Regal, XTS, Impala, Malibu
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2017 | Buick Regal | — |
The 2011-2017 Buick Regal All Class 2 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12115-002) fits 2011-2017 Buick Regal models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2011-2017 Buick Regal All Class 2 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12115-002) is designed to fit the 2011-2017 Buick Regal.
The 2011-2017 Buick Regal All Class 2 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12115-002) fits the following vehicles: 2011-2017 Buick Regal. Always verify your specific year, make, and model before ordering.
The 2011-2017 Buick Regal All Class 2 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-12115-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 12115 is designed for Chevrolet Impala sedans. However, the manual does not specify exact model years, so contact Curt technical support at 1-877-287-8634 to confirm your vehicle's year is covered.
Yes, the Curt 12115 is designed for Buick LaCrosse sedans. However, the manual does not specify exact model years, so contact Curt technical support at 1-877-287-8634 to confirm your vehicle's year is covered.
Yes, the Curt 12115 is designed for Cadillac XTS sedans. However, the manual does not specify exact model years, so contact Curt technical support at 1-877-287-8634 to confirm your vehicle's year is covered.
Yes, the Curt 12115 is designed for Buick Regal sedans. However, the manual does not specify exact model years, so contact Curt technical support at 1-877-287-8634 to confirm your vehicle's year is covered.
Yes, the Curt 12115 is designed for Chevrolet Malibu sedans. However, the manual does not specify exact model years, so contact Curt technical support at 1-877-287-8634 to confirm your vehicle's year is covered.
The Curt 12115 has a gross load capacity of 3500 lbs trailer weight and 350 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch weight is 50 lbs.
The Curt 12115 is designed for use with Euro Mount #45571 (1 7/8" ball) and #45572 (2" ball), and with ball mount #D-225/45017.
Required tools are: power drill, 1/2" drill bit, torque wrench, ratchet, sockets (13mm and 3/4"), wire pipe brush, and aviation shears. Safety glasses must be worn at all times during installation.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized Curt installer for additional assistance.
The manual does not mention disconnecting the battery as part of the installation procedure.
Drilling is not required for all vehicles. However, on Buick LaCrosse (AWD) and Cadillac XTS models, you must enlarge the rearward hole in the suspension cross member to 1/2" using a 1/2" drill bit. On Impala models only, you must trim approximately a 1 1/4 inch deep notch from each side of the bottom bumper fascia.
Yes, on Impala models only, you must trim approximately a 1 1/4 inch deep notch from each side of the bottom bumper fascia. This trim is not required on Malibu, Regal, LaCrosse, or XTS models.
Hole enlargement is required only on Buick LaCrosse (AWD) and Cadillac XTS models. On these vehicles, enlarge the rearward hole in the suspension cross member to 1/2" using a 1/2" drill bit. This step is not required on Impala, Malibu, or Regal models, or on FWD LaCrosse models.
Torque the 1/2" bolt with handle nut to 75 lb-ft.
Torque all other 1/2" hardware (excluding the bolt with handle nut) to 110 lb-ft.
Torque all 8mm hardware to 23 lb-ft.
All non-trailer (wheel-less) loads applied to this product must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. Curt recommends the use of 18050 stabilizing straps for all non-trailer loads. See the Curt catalog or visit www.curtmfg.com for further information.
No. You must never exceed your vehicle manufacturer's recommended towing capacity. Although the Curt 12115 has a gross load capacity of 3500 lbs trailer weight and 350 lbs tongue weight, your vehicle's manufacturer may specify a lower limit, which you must follow.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This should be done regularly throughout the life of the product.
The manual recommends periodically checking the receiver hitch to ensure that all fasteners are tight and that all structural components are sound, but does not specify an exact interval. Regular inspection is advised.
The kit includes: 5 serrated flange nuts (1/2-13 UNC, Grade 8), 4 car bolts (1/2-13 UNC, 1-1/2", Grade 8), 2 hex head cap screws (1/2-13 UNC, 1-1/2", Grade 8), 2 hex head cap screws (M8x1.25, 55mm, Class 10.9), 1 handle nut (1/2-13 UNC, Grade 8), 2 lock washers (1/2"), 2 conical toothed washers (3/8"), 2 hex nuts (M8x1.25, Class 10), 1 wedge spacer (1/2"), receiver tube section, center section, and two bolt-on brackets.
Before you begin installation, read all instructions thoroughly. Then, remove one 8mm bolt from the exhaust hanger bracket on each side of the vehicle, and clean the weldnut using a wire brush or spray lubricant. On Impala models only, trim approximately a 1 1/4 inch deep notch from each side of the bottom bumper fascia.
Raise the receiver tube section of the hitch into place and use the 8mm bolts and conical toothed washers provided to secure it into place. Secure the 8mm nut to the back side of the frame bracket on each side to hold the exhaust bracket in place.
Place the handle nut in the suspension housing and secure it with a 1/2" bolt and lock washer. Note: Bolt-on bracket (1) is used on FWD vehicles built before mid-year 2013. Bolt-on bracket (2) is used on all AWD and FWD models built mid-year 2013 to present.
Raise the center section of the hitch into place and loosely secure the five 1/2" hardware components that hold it into place. Then torque the 1/2" bolt with handle nut to 75 lb-ft, all other 1/2" hardware to 110 lb-ft, and torque all 8mm hardware to 23 lb-ft.
The Curt 12115 fits Chevrolet Impala and Malibu, Buick Regal and LaCrosse, and Cadillac XTS sedans. Confirm your vehicle's year with Curt technical support at 1-877-287-8634.
The Curt 12115 has a gross load capacity of 3500 lbs trailer weight and 350 lbs tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity.
You need a power drill, 1/2" drill bit, torque wrench, ratchet, 13mm and 3/4" sockets, wire pipe brush, aviation shears, and safety glasses.
Trimming is required on Impala models only (1 1/4" notch from each side of bumper fascia). Hole enlargement to 1/2" is required on Buick LaCrosse (AWD) and Cadillac XTS models only.
Torque the 1/2" bolt with handle nut to 75 lb-ft, all other 1/2" hardware to 110 lb-ft, and all 8mm hardware to 23 lb-ft.
Wear safety glasses during installation. All non-trailer loads must be supported by 18050 stabilizing straps. Never exceed your vehicle manufacturer's recommended towing capacity.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $517.85. Current price is $485.46.You save $32.39 (6%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.