Our in-house experts typically reply within one business day.
CURT
On Sale Today
Original price was $366.85. Current price is $283.60.You save $83.25 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2013-2017 Honda Accord Coupe
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Accord (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2013, 2014, 2015, 2016, 2017 Honda Accord Coupe Class 1 Trailer Hitch, 1-1/4" Receiver, Select Honda Accord
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494The 2013-2017 Honda Accord Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11681-001) fits 2013-2017 Honda Accord models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2013-2017 Honda Accord Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11681-001) is designed to fit the 2013-2017 Honda Accord.
The 2013-2017 Honda Accord Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11681-001) fits the following vehicles: 2013-2017 Honda Accord. Always verify your specific year, make, and model before ordering.
The 2013-2017 Honda Accord Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11681-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 11681 is designed for Honda Accord (all) from 2013 onwards, covering all body styles.
The Curt 11681 has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
The Curt 11681 is designed for use with ball mount D-55001 or 45501. Euro mount options are available: part number 45571 (1-7/8" ball) and 45572 (2" ball).
No, drilling is not required. The hitch uses fishwire hardware inserted through existing access holes in both frame rails.
Required tools are: pry bar, ratchet, sockets (10mm, 9/16", and 11/16"), torque wrench, aviation shears, tape measure, and safety glasses.
Two people may be required to ease installation, though it is not strictly mandatory. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required.
The first step is to lower the exhaust by removing two rubber exhaust isolators for single exhaust vehicles or three isolators for dual exhaust vehicles. Save these isolators for reinstallation.
Remove the heat shield(s) by removing four fasteners per shield. Save all fasteners for reinstallation later.
Fishwire 7/16"-14 x 1 1/4" carriage bolts with CM-SP2 spacers into position through access holes in both frame rails. Leave fishwires attached to prevent loss of hardware inside the frame rail. Later, insert the fishwires through mounting holes in the hitch to raise it into position.
Insert the 3/8" U-bolt through the tow hook. Then insert fishwires through mounting holes in the hitch and raise the hitch into position. Secure it to the U-bolt with 3/8"-16 hex flange nuts.
Torque all 7/16" hardware to 70 ft-lbs and all 3/8" hardware to 45 ft-lbs.
If an underbody panel is present, trim it and slide the hitch bracket through the trimmed section. Then raise the underbody panel into position and reinstall fasteners.
Trim heat shield(s) around the hitch. The trim dimensions shown in the heat shield trimming diagram are approximate (approximately 4 inches on top, 3 inches on the sides, and 4 inches on the bottom). You must confirm fit prior to trimming. One fastener per shield will not be reinstalled after trimming.
Reinstall the heat shield(s) with the hardware removed in step 2. Bend the heat shield over the hitch as needed. Note that one fastener per shield will not be reinstalled.
Raise the exhaust and reattach the rubber isolators that were removed in step 1. Installation is then complete.
The kit includes: 2 x 7/16"-14 UNC carriage bolts (part 10-10281), 2 x 0.250 x 0.88 x 2.25" square hole spacers (CM-SP2), 2 x 7/16"-14 UNC serrated flange nuts (20-00103), 1 x 3/8"-16 x 1.00 x 1.88 U-bolt, 2 x 3/8"-16 UNC serrated flange nuts (20-00102), and 2 x 7/16" fishwires.
Safety glasses must be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly.
All non-trailer (wheel-less) loads applied to this hitch must be supported by Curt 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. Curt's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, the Curt 11681 fits all Honda Accord models from 2013 onwards in all body styles.
You need: pry bar, ratchet, 10mm/9/16"/11/16" sockets, torque wrench, aviation shears, tape measure, and safety glasses.
Torque 7/16" hardware to 70 ft-lbs and 3/8" hardware to 45 ft-lbs.
2,000 lbs trailer weight and 200 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
Yes, Curt 18050 stabilizing straps are required for all non-trailer (wheel-less) loads. Failure to use them voids the warranty.
Professional installation: 30 minutes. Novice (DIY) installation: 60 minutes. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2017 | Honda Accord | Coupe |
No reviews have been added for this product.
