Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2020 Mercedes-Benz GLC43 AMG
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2017-2020 Mercedes-Benz GLC43 AMG All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mercedes-Benz GLC300 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Installation requires trimming of heat shield and temporary lowering of exhaust and fascia
2017, 2018, 2019, 2020 Mercedes-Benz GLC43 AMG All Class 3 Trailer Hitch, 2" Receiver, Select Mercedes-Benz GLC300
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2020 | Mercedes-Benz GLC43 AMG | — |
Yes, CURT part 13290 is designed for 2016-present Mercedes GLC 300 and GLC 43 AMG SUVs. The hitch is a weight-carrying style with a 6,000 lbs trailer weight capacity and 900 lbs tongue weight capacity. Always verify your vehicle's manufacturer towing capacity before towing.
The CURT 13290 is rated for a maximum trailer weight of 6,000 lbs and a tongue weight of 900 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
Never exceed your vehicle manufacturer's recommended towing capacity. The hitch itself is rated for 6,000 lbs trailer weight and 900 lbs tongue weight, but your vehicle may have a lower limit. Check your vehicle's owner manual for the maximum towing capacity.
CURT recommends the use of 18050 stabilizing straps for all non-trailer (wheel-less) loads. For more information about stabilizing straps, see the CURT catalog or visit www.curtmfg.com.
Required tools include: T40 Torx bit socket, E12 inverted Torx bit socket, 8mm socket, 10mm socket, 18mm socket, torque wrench, aviation shears, ratchet, 8-inch socket extension, and a pry tool. Safety glasses must be worn at all times during installation.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, CURT recommends contacting an authorized CURT installer for additional assistance. You can call technical support at 877.287.8634 for help.
Professional installation time is approximately 90 minutes. Installation is rated as moderate difficulty. Novice installation may take longer.
No drilling is required to install the CURT 13290. However, trimming of the heat shield is required: you must trim a 2.00" × 3.00" section using aviation shears. All dimensions are approximate; confirm fit prior to trimming.
Yes. Installation requires removing the exhaust tips (4 screws, 2 on each side, using T40 Torx bit socket) and lowering the exhaust by removing 3 rubber isolators. The exhaust is reinstalled in step 8 after the hitch is secured.
Yes. The bumper beam must be removed by removing M12 hardware using an 18mm socket. It is then reinstalled over the hitch and loosely secured with M12 hardware in step 6, then fully torqued in step 7.
Yes. The lower rear fascia must be removed by removing 6 screws (3 on each side) using a 10mm socket and 4 push pins (2 on each side) using a pry tool. Unclip electrical harnesses. Start by partially removing the rear wheel trim piece and gently pull the fascia away by releasing press-in tabs along the top. The fascia is reinstalled in step 8.
Yes. You must open the cargo area, lift and remove the rear floor panel, and remove 1 Torx screw from the threshold. Use a plastic pry tool to dislodge and remove the threshold. Then remove the floor pan to access and unplug 2 electrical sensor plugs on the passenger side of the rear trunk wall. Dislodge the grommet and push it to the rear/outside of the vehicle.
The heat shield must be trimmed 2.00" × 3.00" using aviation shears, measured from the center line of the vehicle as shown in the trim diagram. The heat shield is removed by removing 10 nuts using an 8mm socket. All dimensions are approximate; confirm fit prior to trimming. The trimmed heat shield is reinstalled in step 8.
All M12 hardware must be torqued to 55 ft-lbs. This is done in step 7 after the bumper beam is loosely secured over the hitch in step 6.
Installation sequence: (1) Remove exhaust tips using T40 Torx bit socket; (2) Lower exhaust by removing rubber isolators and access electrical sensors in cargo area; (3) Remove lower rear fascia using 10mm socket and pry tool; (4) Remove and trim heat shield using 8mm socket and aviation shears; (5) Remove bumper beam using 18mm socket; (6) Install hitch on vehicle frame using existing studs and loosely secure bumper beam with M12 hardware; (7) Torque all M12 hardware to 55 ft-lbs; (8) Reinstall all removed components in reverse order.
Yes. Removing the exhaust bracket from the bumper beam may ease installation. If you choose to do this, remove 2 screws (1 on each side) using an E12 inverted Torx bit socket. The bracket is reinstalled in step 8.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This helps maintain safe operation and extends the life of the hitch.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
The CURT 13290 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
You can call CURT technical support at 877.287.8634. For more information, visit www.curtmfg.com. For helpful towing tips, visit www.hitchinfo.com.
Yes, the CURT 13290 is designed for 2016-present Mercedes GLC 300 and GLC 43 AMG SUVs with a 6,000 lbs trailer and 900 lbs tongue weight capacity.
You need T40 and E12 Torx bit sockets, 8mm/10mm/18mm sockets, torque wrench, aviation shears, ratchet, 8-inch extension, pry tool, and safety glasses.
All M12 hardware must be torqued to 55 ft-lbs in step 7 after the bumper beam is loosely secured.
Professional installation takes approximately 90 minutes. Installation is rated moderate difficulty; novice installation may take longer.
The hitch is rated for 6,000 lbs trailer weight and 900 lbs tongue weight, but you must never exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $429.85. Current price is $320.71.You save $109.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 8 - Tue, Aug 11
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.