Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2025 Jaguar F-Pace
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2017-2025 Jaguar F-Pace All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jaguar F-Pace (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Installation requires underbody panel trimming and temporary removal of bumper fascia
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 Jaguar F-Pace All Class 3 Trailer Hitch, 2" Receiver, Select Jaguar F-Pace
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2025 | Jaguar F-Pace | — |
Yes, the 2017-2025 Jaguar F-Pace All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13291-001) is designed to fit the 2017-2025 Jaguar F-Pace.
The 2017-2025 Jaguar F-Pace All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13291-001) fits 2017-2025 Jaguar F-Pace models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2017-2025 Jaguar F-Pace All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13291-001) fits the following vehicles: 2017-2025 Jaguar F-Pace. Always verify your specific year, make, and model before ordering.
The 2017-2025 Jaguar F-Pace All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13291-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 13291 is designed for 2017-Present Jaguar F-PACE CUV models. Confirm your vehicle year and model match this range before purchasing.
The CURT 13291 is rated for a maximum trailer weight of 6,000 lbs and tongue weight of 900 lbs when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
Required tools are: ratchet, torque wrench, 6-inch socket extension, 8mm socket, 10mm socket, 21mm socket, T25 torxbit socket, plastic pry tool, screwdriver, masking tape, aviation shears, and safety glasses. Proper tools will greatly improve installation quality and reduce installation time.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. You can reach CURT technical support at 877-287-8634.
Professional installation time is 120 minutes. Novice (DIY) installation time is 60 minutes. Actual time may vary depending on your experience and familiarity with the vehicle.
Yes, trimming is required. You must mark out and trim a 3.25-inch by 6-inch section of the underbody panel using masking tape and aviation shears. These dimensions are approximate; confirm the exact section prior to reinstallation. The trimmed panel is set aside for later reinstallation.
On the underbody panel, remove 3 screws using a 10mm socket and 4 screws using a screwdriver. After removal, mark and trim the 3.25-inch by 6-inch section, then set the panel aside for later reinstallation.
Inside the wheel well, locate and remove 2 screws using a screwdriver. Once removed, pull back the wheel well to reveal 5 additional screws. Remove 2 of these screws using a T25 torxbit socket and 3 using a screwdriver. Set the wheel well accent piece aside for later reinstallation.
Locate and remove the plastic cover next to each tail light, revealing 1 screw on each side. Remove these screws using an 8mm socket. Locate 1 plastic screw on each side and remove using a screwdriver. Use a plastic pry tool to remove the remaining plastic push pins. Set all pieces aside for later reinstallation.
Gently remove the bumper fascia starting at the outside of the vehicle and working towards the rear. Locate and unplug 2 electrical plugs on the bumper fascia. Set the fascia aside for later reinstallation.
The bumper beam is secured with 8 M14 bolts (4 on each side) that attach to existing weld nuts on the vehicle frame. These bolts are removed and reused to attach the hitch. You will also remove 5 screws along the panel using an 8mm socket.
The 8 M14 bolts must be torqued to 126 ft-lbs. First, loosely fasten all bolts while lining up the hitch holes with the bumper beam holes, then torque them to the specified value.
Use a 21mm socket to remove and install the 8 M14 bolts (4 on each side of the bumper beam).
Reinstall following steps 1-5 in reverse order. This means: reinstall the bumper beam and panel fasteners, reconnect the bumper fascia electrical plugs and reinstall the fascia, reinstall the tail light area covers and screws, reinstall the wheel well accent piece and screws, and finally reinstall the underbody panel and trim.
Safety glasses must be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly. Using proper tools will greatly improve the quality of the install and reduce the time required.
All non-trailer loads applied to this product must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty.
The CURT 13291 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
The CURT 13291 is designed for 2017-Present Jaguar F-PACE CUV models only.
Maximum trailer weight is 6,000 lbs and tongue weight is 900 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, you must trim a 3.25-inch by 6-inch section of the underbody panel using aviation shears. The trimmed panel is reinstalled after hitch installation.
You need: ratchet, torque wrench, 6-inch socket extension, 8mm/10mm/21mm sockets, T25 torxbit socket, plastic pry tool, screwdriver, masking tape, aviation shears, and safety glasses.
The 8 M14 bolts must be torqued to 126 ft-lbs using a 21mm socket.
Professional installation: 120 minutes. Novice (DIY) installation: 60 minutes.
Safety glasses must be worn at all times during installation.
On Sale Today
Original price was $541.85. Current price is $394.71.You save $147.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 9 - Sat, Sep 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.