Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1996 - 2000 Toyota RAV4
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Side Application Type Description | Blank |
| T-Connector Location | S3,S4 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1996 - 2000 | Toyota RAV4 | — |
The 96-00 Toyota RAV4 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2428) fits the following vehicles: 1996-2000 Toyota RAV4. Always verify your specific year, make, and model before ordering.
The 96-00 Toyota RAV4 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2428) fits 1996-2000 Toyota RAV4 models. The 2000 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 96-00 Toyota RAV4 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2428) is designed to fit the 1996-2000 Toyota RAV4.
The 96-00 Toyota RAV4 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2428) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part 55486 is designed for the Toyota RAV-4. The manual does not specify which model years or generations are compatible, so contact Curt Manufacturing or your retailer to confirm your specific RAV-4 model year is supported.
You must remove the rear hatch scuff panel, floor coverings, storage covers, and privacy screen. On both sides of the vehicle, remove all trim fasteners and slightly pull out the rear trim panels to access the taillight wiring harness and create a routing path for the connectors.
Locate the vehicle's taillight wiring harness on the passenger side. The harness will have connectors similar to those on the T-connector. Insert the T-connector end with the green wire between the separated connectors. Ensure the connectors are fully inserted with locking tabs in place. Repeat the same process on the driver's side using the T-connector end with the yellow wire.
Route the T-connector end with the green wire on the passenger side. Route the T-connector end with the yellow wire out from behind the passenger side trim panel, along the removed scuff panel, and behind the passenger's side trim panel. Repeat on the driver's side. Route the 4-flat wire to the center of the vehicle and out the hatch when in use.
When not in use, roll up the 4-flat wire and store it in an out-of-the-way location in the rear cargo area of the RAV-4.
Before drilling or removing any surfaces, verify that miscellaneous items are not hidden behind or under any surface. This prevents damage to hidden components and personal injury.
Curt 55486 is designed for the Toyota RAV-4. Confirm your specific model year with the retailer or manufacturer.
Yes. You must remove the rear scuff panel, floor coverings, storage covers, privacy screen, and rear trim panels on both sides to access the taillight wiring harness and route the connectors.
Insert the T-connector end with the green wire between the separated taillight connectors on the passenger side, ensuring locking tabs are fully seated. Repeat with the yellow wire end on the driver's side.
Roll up and store the 4-flat wire in an out-of-the-way location in the rear cargo area.
Verify that no miscellaneous items are hidden behind or under any surface before removing panels to avoid damage and personal injury.
Total for 4 items:
$163.71
No reviews have been added for this product.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sun, Sep 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
