Lippert

Lippert

Lippert Trailer Bearing Replacement for 5,200-lb. Axle Hubs - 2.25" Inner Diameter Seal 2023133981

• Includes inner/outer bearing cones, races, grease seal
• Complete kit with cotter pin and spindle washer
• Universal application compatible with competitor axles
• Genuine Lippert OEM replacement part

Lippert

Lippert Trailer Bearing Replacement for 3,500-lb. Axle Hubs, 1.719" Inner Diameter Seal 2023133980

• Includes inner/outer bearing cones and races (complete set)
• Universal application compatible with competitor axles
• Genuine Lippert replacement part for trailer axles

Lippert

Lippert Trailer Bearing Replacement for 2,000-lb. Axle Hubs - 1.5" Inner Diameter Seal 2023133979

• 5,000-lb load capacity per jack, 2-pack included
• Extends to 24 inches, retracts to 4.25 inches
• Bolt-on or weld-on installation, hardware included
• Bow-tie base design for added stability
• Black powder-coated rust-inhibitive finish

Lippert

Lippert Manual RV Scissor Jack Kit - 24" 5,000 lbs. 2-Pack #285326

• 500:1 high-torque motor assembly for Lippert In-Wall slide-outs
• Motor only—complete slide-out assembly not included
• Genuine Lippert replacement part, exact match
• DIY installation compatible
• RV slide-out motorization component

Lippert

Lippert Replacement In-Wall Slide-Out High-Torque 500:1 Motor #287298

Lippert

Lippert Attaching Parts for 10,000-lb. Slipper Tandem Axles - 48-1/4" - No Equalizer 184175

• Manual override for electric stabilizers during power failure
• Compatible with select manual slide-out overrides
• No assembly required

Lippert

Lippert Manual Crank Handle for Stabilizers & Landing Gear #119226

• Replacement controller module only, assembly not included
• V-Sync II model 13398-DO replaces older 13398-C2
• Compatible with Lippert In-Wall slide-out systems
• Genuine Lippert OEM replacement part
• Check owner's manual before purchasing for compatibility

Lippert

Lippert Replacement In-Wall Slide-Out Controller V-Sync II #13398-DO

• 10,000-lb slipper tandem axle attachment kit
• 2x 1-8 equalizer nuts, 4x 3/4-10 lock nuts
• Hangers sold separately; excludes spring-to-axle mounting components
• Genuine Lippert OEM replacement part 184173

Lippert

Lippert Trailer Axle Attaching Parts for 10,000-lb. Slipper Tandem Axles 184173

• Manual crank operation for extending and retracting
• Compatible with scissor jacks, tongue jacks, landing gear
• No assembly required, ready to use immediately
• Durable construction for repeated manual operation cycles

Lippert

Lippert Manual Crank Handle for RV Jacks & Slide-Outs - 3/4" Hex

• 2,200 lbs axle rating
• Fits 8 to 12 inch wheels
• Solid iron construction with 1-year warranty

Lippert

Lippert 7" Brake Hub, 5 on 4.5"; 1/2" Stud - 2,200 lbs. (with Bearing Cone Kit) 814209

• 35-foot male-to-female 6-pin wiring harness
• Lippert In-Wall slide-out controller-to-motor connection
• Genuine OEM replacement component, motor not included
• Direct plug-and-play connector compatibility
• Exact-match Lippert part specification

Lippert

Lippert Replacement In-Wall RV Slide-Out 6-Pin Controller-to-Motor Harness - 35' Male-to-Female #238992

• 1/4" inside hose diameter with crimp-on coupling design
• 1/4" female JIC 37° flare port connection
• Straight fitting orientation for Level Up systems
• Replacement coupling for hydraulic leveling hose assembly

Lippert

Lippert Level Up Hydraulic Hose End Fitting (JIC) - Crimp-on Coupling #138416

• 3,500 lbs axle rating for trailer idler axles
• Fits 13 to 15 inch wheels
• Solid iron construction, one-year warranty included

Lippert

Lippert Idler Hub, 5 on 4.5" - 3,500 lbs. (with Bearing Cone Kit) 814208

• IG-42 10-millimeter motor assembly for Lippert In-Wall slide-outs
• Genuine OEM Lippert replacement part, exact-match fitment
• DIY installation, no professional technician required
• Not compatible with other Lippert slide-out motor types

Lippert

Lippert Replacement IG-42 10-Millimeter In-Wall RV Slide-Out Motor Assembly #236575