ARIES 30" Single-Row LED Light Bar (14,800 Lumens) Light BarARIESOriginal price was $704.95. Current price is $400.00.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
ARIES
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one light bar, mounting hardware and wiring harness
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Light - Beam Type: Combo
Light - Configuration: Single-row
Light - Light Size: 20 IN
Light - Light Type: Light Bar
Light - Lumens: 9,800
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. At the heart of each ARIES LED light is a set of grade-A LED chips. Each LED is set into a high-efficiency reflector to eliminate as much wasted light as possible and allowing for 96% reflector efficiency. This means a farther-reaching, more powerful beam without increased electrical input or higher running temperatures. The LED chips are securely mounted in a strong, rust-free aluminum housing and shielded with a rugged Lexan lens to withstand impacts and resist cracking. The housing keeps moisture out and allows us to give our LED lights an IP68 and IP69K waterproof and dustproof rating. Each light is also equipped with an IP68-standard breather that completely seals the housing and keeps moisture and air from getting inside and corroding the LEDs. ARIES LED lights are outfitted with dual, oversize heat sinks for optimal efficiency and longevity. These heat sinks keep running temperatures low, protect against burnout and promote a long operating life. Our lights average a 50,000-hour lifespan, translating to five years of continuous use. They also feature instant on-off, so no time is wasted waiting for the light to warm up. To prove that our LED lights are different, they undergo strenuous testing, including a UV test, extreme temperature test, vibration test, dust test, salt test and altitude test. They are CE-certified and RoHS-certified. Each light comes with stainless steel mounting hardware and pivoting bracket for custom positioning on your vehicle, and each is fitted with a strong, waterproof wiring harness for a reliable connection.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
The kit includes: one 10" LED light bar, left and right mounting brackets, wiring harness with connectors, two M6 security screws (1.0 x 25mm) with rubber spacers and flat washers, two M8 hex head cap screws (1.25 x 18mm) with flat washers and nylock nuts, one M6 L-wrench for security screws, and one pre-installed 15-amp fuse.
Yes, the light bar can be used on 24V systems, but the relay must be replaced with a 24V unit. The kit is supplied with a 12V relay by default.
The manual specifies that an M6 L-wrench is provided for the security screws. No other tools are explicitly listed as required. However, standard tools for fastener installation and wire routing (such as a wrench or socket set for the M8 fasteners, wire strippers, and zip ties) would be needed for complete installation.
Mount the LED light bar in your desired location using the left and right mounting brackets. Place a rubber spacer between the mounting surface and each bracket to protect the finish and ensure proper fit. Secure the brackets using the provided M6 security screws (1.0 x 25mm) with flat washers. Use the supplied M6 L-wrench to tighten the security screws.
The switch should be installed in a location of your choice within the vehicle. Disconnect the supplied switch from the wiring harness before installation, then reconnect the blue, red, and black spade connectors to the switch after routing the harness to the light.
Route the wiring harness to the light and insert the male plug on the wiring harness into the female socket on the LED light. Then reconnect the blue, red, and black spade connectors to the switch according to the wiring diagram provided in the manual.
Connect the red fused wire with the ring terminal to the positive (+) battery post. Connect the black wire ring terminal to the negative (-) battery post or another suitable vehicle grounding point. The kit includes a pre-installed 15-amp fuse in the red wire.
Mount the provided relay to the vehicle in a secure location. Secure all wires with zip ties away from moving parts to avoid damage during vehicle operation.
After mounting the relay and securing all wires with zip ties, test the light to ensure proper function. Activate the switch and verify that the LED light bar illuminates correctly.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections. Check the condition of the wiring harness, battery connections, and relay mounting regularly.
The kit includes a pre-installed 15-amp fuse in the red fused wire that connects to the positive battery post.
Improper electrical installation may damage electronic components, resulting in personal injury, property, or equipment damage. Damage caused by incorrect installation is not covered by warranty. Installation should only be performed by qualified personnel with a solid understanding of electrical systems.
Yes, but the relay must be replaced with a 24V unit. The kit includes a 12V relay by default.
Two M6 security screws (1.0 x 25mm) with rubber spacers and flat washers, two M8 hex head cap screws (1.25 x 18mm) with flat washers and nylock nuts, and one M6 L-wrench.
Yes, place a rubber spacer between the mounting surface and each bracket to protect the finish and ensure proper fit.
The kit includes a pre-installed 15-amp fuse in the red wire that connects to the positive battery post.
Installation should only be performed by qualified personnel with a solid understanding of electrical systems. Improper electrical installation may damage electronic components and is not covered by warranty.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections.
On Sale Today
Original price was $422.95. Current price is $240.00.You save $182.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.