Our in-house experts typically reply within one business day.
ARIES
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one light bar, mounting hardware and wiring harness
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Aluminum
Light - Beam Type: Combo
Light - Configuration: Double-row
Light - Light Size: 50 IN
Light - Light Type: Light Bar
Light - Lumens: 24,000
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. At the heart of each ARIES LED light is a set of grade-A LED chips. Each LED is set into a high-efficiency reflector to eliminate as much wasted light as possible and allowing for 96% reflector efficiency. This means a farther-reaching, more powerful beam without increased electrical input or higher running temperatures. The LED chips are securely mounted in a strong, rust-free aluminum housing and shielded with a rugged Lexan lens to withstand impacts and resist cracking. The housing keeps moisture out and allows us to give our LED lights an IP68 and IP69K waterproof and dustproof rating. Each light is also equipped with an IP68-standard breather that completely seals the housing and keeps moisture and air from getting inside and corroding the LEDs. ARIES LED lights are outfitted with dual, oversize heat sinks for optimal efficiency and longevity. These heat sinks keep running temperatures low, protect against burnout and promote a long operating life. Our lights average a 50,000-hour lifespan, translating to five years of continuous use. They also feature instant on-off, so no time is wasted waiting for the light to warm up. To prove that our LED lights are different, they undergo strenuous testing, including a UV test, extreme temperature test, vibration test, dust test, salt test and altitude test. They are CE-certified and RoHS-certified. Each light comes with stainless steel mounting hardware and pivoting bracket for custom positioning on your vehicle, and each is fitted with a strong, waterproof wiring harness for a reliable connection.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
The kit includes: one 50" LED light bar, left and right mounting brackets, a wiring harness with pre-installed 30 amp fuse, two M6 security screws (25mm), two M6 rubber spacers, two M6 flat washers, one L-wrench for the security screws, and a switch that disconnects from the harness for separate installation.
The light bar is supplied with a 12V relay. If you are using it with a 24V system, you must replace the relay with a 24V unit before installation. The manual does not specify where to source the 24V relay or provide part numbers.
Mount the light bar in your desired location using the left and right mounting brackets. Place a rubber spacer between the mounting surface and each bracket before securing with the M6 security screws (25mm). The manual does not specify drilling requirements or the exact mounting surface.
The switch disconnects from the wiring harness and should be installed in your desired location inside the vehicle. After installation, reconnect the blue, red, and black spade connectors from the harness to the switch according to the wiring diagram.
Connect the red fused wire with the ring terminal to the positive (+) battery post. Connect the black wire ring terminal to the negative (-) battery post or another suitable vehicle grounding point. The fuse is pre-installed in the red wire.
The wiring harness includes a pre-installed 30 amp fuse. This fuse protects the circuit and should not be replaced with a different rating.
Route the wiring harness to the light bar. Insert the male plug on the wiring harness into the female socket on the LED light. Then reconnect the blue, red, and black spade connectors to the switch according to the wiring diagram.
The manual states to mount the relay to the vehicle but does not specify the exact location. Secure all wires with zip ties away from moving parts to avoid damage. Consult the manufacturer or a qualified technician for the recommended relay mounting location for your vehicle.
Installation should only be performed by qualified personnel with a solid understanding of electrical systems. Improper electrical installation may damage electronic components, resulting in personal injury, property, or equipment damage. Damage caused by incorrect installation is not covered by warranty. Secure all wires with zip ties away from moving parts to prevent damage.
After completing all installation steps, test the light to ensure proper function. The manual does not provide specific testing procedures. Verify that the light illuminates when the switch is activated and that all connections are secure.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections. The manual does not specify an inspection interval or other maintenance procedures.
The kit includes an L-wrench for the M6 security screws. The manual does not specify other tools required for mounting, wiring, or relay installation. You will likely need basic hand tools and zip ties.
Yes. The manual states that installation should only be performed by qualified personnel with a solid understanding of electrical systems. Improper installation may damage electronic components and is not covered by warranty.
Yes. The wiring harness includes a pre-installed 30 amp fuse. No additional fuse installation is required.
The light bar is supplied with a 12V relay. For 24V systems, you must replace the relay with a 24V unit before installation. The manual does not provide the 24V relay part number.
On Sale Today
Original price was $1,268.95. Current price is $720.00.You save $548.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
