Our in-house experts typically reply within one business day.
ARIES
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes two LED lights, mounting hardware and wiring harnesses
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Light - Beam Type: Flood
Light - Configuration: Square, flush-mount (set of two)
Light - Light Size: 2 IN
Light - Light Type: Work Light
Light - Lumens: 2,200
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. At the heart of each ARIES LED light is a set of grade-A LED chips. Each LED is set into a high-efficiency reflector to eliminate as much wasted light as possible and allowing for 96% reflector efficiency. This means a farther-reaching, more power ful beam without increased electrical input or higher running temperatures. The LED chips are securely mounted in a strong, rust-free aluminum housing and shielded with a rugged Lexan lens to withstand impacts and resist cracking. The housing keeps moisture out and allows us to give our LED lights an IP68 and IP69K waterproof and dustproof rating. Each light is also equipped with an IP68-standard breather that completely seals the housing and keeps moisture and air from getting inside and corroding the LEDs. ARIES LED lights are outfitted with dual, oversize heat sinks for optimal efficiency and longevity. These heat sinks keep running temperatures low, protect against burnout and promote a long operating life. Our lights average a 50,000-hour lifespan, translating to five years of continuous use. They also feature instant on-off, so no time is wasted waiting for the light to warm up. To prove that our LED lights are different, they undergo strenuous testing, including a UV test, extreme temperature test, vibration test, dust test, salt test and altitude test. They are CE-certified and RoHS-certified. Each light comes with stainless steel mounting hardware and pivoting bracket for custom positioning on your vehicle, and each is fitted with a strong, waterproof wiring harness for a reliable connection.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
The kit includes 2 LED work lights (flush mount), 1 wiring harness, 8 socket head cap screws (M6 - 1.0 x 16mm), 8 flat washers (M6), 8 nylock nuts (M6), 2 rubber spacers, 1 switch, 1 relay, and 1 pre-installed 5-amp fuse.
The kit is designed for 12V systems. If you are using a 24V system, the relay will need to be replaced with a 24V unit. The manual does not specify the part number of the 24V relay or confirm whether other components are 24V compatible.
The manual does not explicitly state whether the battery must be disconnected before installation. However, because the final step involves connecting wires directly to the battery posts, it is strongly recommended to disconnect the negative battery terminal before beginning work to prevent electrical shock or short circuits.
Mount each LED light in your desired location with a rubber spacer between the mounting surface and the light. Use the 8 socket head cap screws (M6 - 1.0 x 16mm), 8 flat washers (M6), and 8 nylock nuts (M6) provided. The rubber spacer prevents direct contact between the light and the mounting surface.
Disconnect the supplied switch from the wiring harness and install it in your desired location. The manual does not specify restrictions on switch placement, but it should be positioned where it is easily accessible to the operator.
Route the wiring harness to each light and insert the male plug on the wiring harness into the female socket on each LED light. Then reconnect the blue, red, and black spade connectors to the switch according to the wiring diagram provided on page 1.
Connect the red fused wire with the ring terminal to the positive (+) battery post. Connect the black wire ring terminal to the negative (-) battery post or another suitable vehicle grounding point. The red wire is protected by a pre-installed 5-amp fuse.
The wiring harness includes red, black, and blue spade connectors. The red wire (fused) connects to the positive battery post, the black wire connects to the negative battery post or vehicle ground, and the blue wire connects to the switch. Refer to the wiring diagram on page 1 for the correct switch terminal connections.
The kit includes a pre-installed 5-amp fuse on the red fused wire. The manual does not specify whether this fuse rating is appropriate for 24V systems.
Mount the provided relay to the vehicle in a location where it will be protected from damage. The manual does not specify an exact location, but it should be secured away from moving parts and moisture.
Secure all wires with zip ties away from moving parts to avoid damage. Route the wiring harness carefully to each light and the switch, keeping wires clear of engine components, exhaust systems, and any moving mechanical parts.
After completing all wiring connections and securing the relay and wires, test the lights to ensure proper function. Activate the switch and verify that both LED lights illuminate. If the lights do not work, check all wire connections, the fuse, and the relay installation.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections. Check that all fasteners remain tight and that wires are still secured away from moving parts.
Improper electrical installation may damage electronic components, resulting in personal injury, property or equipment damage. Damage caused by incorrect installation is not covered by warranty. Installation requires a solid understanding of electrical systems to ensure safe and correct wiring connections to the battery and vehicle ground.
The 1501250 is a universal LED work light kit designed for vehicles with 12V electrical systems. For 24V systems, the relay must be replaced with a 24V unit. Mounting location and fitment depend on your specific vehicle; consult the mounting dimensions on page 2.
The kit includes 8 socket head cap screws (M6 - 1.0 x 16mm), 8 flat washers (M6), 8 nylock nuts (M6), and 2 rubber spacers for mounting the lights.
Yes. The manual states that installation should only be performed by qualified personnel with a solid understanding of electrical systems. Improper installation may damage electronic components and is not covered by warranty.
On Sale Today
Original price was $140.95. Current price is $80.00.You save $60.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
