Our in-house experts typically reply within one business day.
ARIES
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one light bar, mounting hardware and wiring harness
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Light - Beam Type: Combo
Light - Configuration: Single-row
Light - Light Size: 10 IN
Light - Light Type: Light Bar
Light - Lumens: 4,900
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. At the heart of each ARIES LED light is a set of grade-A LED chips. Each LED is set into a high-efficiency reflector to eliminate as much wasted light as possible and allowing for 96% reflector efficiency. This means a farther-reaching, more powerful beam without increased electrical input or higher running temperatures. The LED chips are securely mounted in a strong, rust-free aluminum housing and shielded with a rugged Lexan lens to withstand impacts and resist cracking. The housing keeps moisture out and allows us to give our LED lights an IP68 and IP69K waterproof and dustproof rating. Each light is also equipped with an IP68-standard breather that completely seals the housing and keeps moisture and air from getting inside and corroding the LEDs. ARIES LED lights are outfitted with dual, oversize heat sinks for optimal efficiency and longevity. These heat sinks keep running temperatures low, protect against burnout and promote a long operating life. Our lights average a 50,000-hour lifespan, translating to five years of continuous use. They also feature instant on-off, so no time is wasted waiting for the light to warm up. To prove that our LED lights are different, they undergo strenuous testing, including a UV test, extreme temperature test, vibration test, dust test, salt test and altitude test. They are CE-certified and RoHS-certified. Each light comes with stainless steel mounting hardware and pivoting bracket for custom positioning on your vehicle, and each is fitted with a strong, waterproof wiring harness for a reliable connection.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
The kit includes: one 10" LED light bar, left and right mounting brackets, a wiring harness with pre-installed 15-amp fuse, one security screw L-wrench, two M6 security screws (1.0 x 25mm), two M6 rubber spacers, two M6 flat washers, two M8 hex head cap screws (1.25 x 18mm), two M8 flat washers, two M8 Nylock nuts, and a disconnectable switch.
The kit is supplied with a relay for standard 12V systems. If you are using a 24V system, the relay will need to be replaced with a 24V unit. Consult the manufacturer for the correct 24V relay part number.
1. Mount the LED light bar in the desired location with a rubber spacer between the mounting surface and each bracket. Disconnect the supplied switch from the wiring harness and install it in the desired location. 2. Route the wiring harness to the light and insert the male plug into the female socket on the LED light. Reconnect the blue, red and black spade connectors to the switch. 3. Connect the red fused wire with ring terminal to the positive battery post and the black wire ring terminal to the negative battery post or suitable grounding point. 4. Mount the relay to the vehicle and secure all wires with zip ties away from moving parts. Test the light.
Place one rubber spacer (M6) between the mounting surface and each mounting bracket before securing the LED light bar. This prevents direct contact between the bracket and the mounting surface.
Insert the male plug on the wiring harness into the female socket on the LED light bar. Then reconnect the blue, red and black spade connectors to the switch in the locations shown in the wiring diagram.
The blue, red and black spade connectors from the wiring harness connect to the switch. Refer to the wiring diagram on page 1 for the exact connection points.
Connect the red fused wire with the ring terminal to the positive (+) battery post. Connect the black wire ring terminal to the negative (−) battery post or other suitable vehicle grounding point. The red wire includes a pre-installed 15-amp fuse.
The wiring harness includes a pre-installed 15-amp fuse on the red wire.
The manual states to mount the relay to the vehicle but does not specify a particular location. Mount it in a secure location away from heat sources, moisture and moving parts. Secure all wires with zip ties to prevent damage.
Secure all wires with zip ties away from moving parts to avoid damage. This prevents the wires from being caught or pinched during vehicle operation.
After installation, test the light to ensure proper function. The manual also recommends periodic inspection of all wires and connections to ensure there is no visible damage or loose connections.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections. Check that all fasteners remain tight and that wires are still secured away from moving parts.
The kit includes a security screw L-wrench for the M6 security screws. You will also need standard hand tools such as wrenches or sockets for the M8 hex head cap screws and Nylock nuts, wire strippers, and zip ties (not included).
The manual states that installation should only be performed by qualified personnel with a solid understanding of electrical systems. Improper electrical installation may damage electronic components resulting in personal injury, property or equipment damage, and such damage is not covered by warranty.
The manual requires that installation be performed by qualified personnel with a solid understanding of electrical systems. Improper installation may damage electronic components and is not covered by warranty.
On Sale Today
Original price was $310.95. Current price is $176.00.You save $134.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
