Our in-house experts typically reply within one business day.
ARIES
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes two LED lights, mounting hardware and wiring harnesses
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Light - Beam Type: Spot
Light - Configuration: Square (set of two)
Light - Light Size: 2 IN
Light - Light Type: Work Light
Light - Lumens: 2,200
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. At the heart of each ARIES LED light is a set of grade-A LED chips. Each LED is set into a high-efficiency reflector to eliminate as much wasted light as possible and allowing for 96% reflector efficiency. This means a farther-reaching, more powerful beam without increased electrical input or higher running temperatures. The LED chips are securely mounted in a strong, rust-free aluminum housing and shielded with a rugged Lexan lens to withstand impacts and resist cracking. The housing keeps moisture out and allows us to give our LED lights an IP68 and IP69K waterproof and dustproof rating. Each light is also equipped with an IP68-standard breather that completely seals the housing and keeps moisture and air from getting inside and corroding the LEDs. ARIES LED lights are outfitted with dual, oversize heat sinks for optimal efficiency and longevity. These heat sinks keep running temperatures low, protect against burnout and promote a long operating life. Our lights average a 50,000-hour lifespan, translating to five years of continuous use. They also feature instant on-off, so no time is wasted waiting for the light to warm up. To prove that our LED lights are different, they undergo strenuous testing, including a UV test, extreme temperature test, vibration test, dust test, salt test and altitude test. They are CE-certified and RoHS-certified. Each light comes with stainless steel mounting hardware and pivoting bracket for custom positioning on your vehicle, and each is fitted with a strong, waterproof wiring harness for a reliable connection.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
The kit includes 2 LED work lights with base mounts, 1 wiring harness with connectors, 2 carriage bolts (M8 - 1.25 x 30mm), 2 lock washers (M8), 2 hex nuts (M8), 1 pre-installed 5-amp fuse, and 1 switch with spade connectors.
Yes, the 1501252 can be used with 24V systems, but the relay must be replaced with a 24V unit. The kit is designed for 12V systems by default.
The manual does not explicitly state whether battery disconnection is required. However, given the warning about improper electrical installation damaging electronic components, it is strongly recommended to disconnect the battery before working with the electrical connections.
Mount the 2 LED lights in your desired location using the supplied hardware: carriage bolts (M8 - 1.25 x 30mm), lock washers (M8), and hex nuts (M8). The lights have a base mount for attachment to a flat surface.
Disconnect the supplied switch from the wiring harness and install it in a desired location of your choice, such as on the dashboard or within easy reach of the driver. The switch connects to the wiring harness via blue, red, and black spade connectors.
Route the wiring harness to each light and insert the male plug on the wiring harness into the female socket on each LED light. Then reconnect the blue, red, and black spade connectors to the switch as shown in the wiring diagram.
Connect the red fused wire with the ring terminal to the positive (+) battery post. Connect the black wire ring terminal to the negative (-) battery post or another suitable vehicle grounding point. The kit includes a pre-installed 5-amp fuse on the red wire.
The wiring diagram shows that the black wire connects to the gold switch terminal. The blue and red spade connectors also connect to the switch. Refer to the wiring diagram on page 1 for the complete connection layout.
Mount the provided relay to the vehicle in a secure location. The manual does not specify an exact location, but it should be positioned where it is protected from moisture and moving parts. Secure all wires with zip ties away from moving parts to avoid damage.
The kit includes a pre-installed 5-amp fuse on the red fused wire that connects to the positive battery post.
After mounting the relay and securing all wires with zip ties, test the lights to ensure proper function. Activate the switch and verify that both LED lights illuminate correctly.
Periodic inspection of all wires and connections should be performed to ensure there is no visible damage or loose connections. Check the wiring harness, battery connections, and switch connections regularly.
Improper electrical installation may damage electronic components, resulting in personal injury, property, or equipment damage. Damage caused by incorrect installation is not covered by warranty. Installation should only be performed by qualified personnel with a solid understanding of electrical systems.
Yes, but the relay must be replaced with a 24V unit. The kit is designed for 12V systems by default.
5 amps, pre-installed on the red fused wire.
Connect the red fused wire to the positive (+) battery post and the black wire to the negative (-) battery post or suitable grounding point.
Periodically inspect all wires and connections for visible damage or loose connections.
Yes. Installation should only be performed by qualified personnel with a solid understanding of electrical systems. Improper installation may damage electronic components and is not covered by warranty.
On Sale Today
Original price was $338.95. Current price is $192.00.You save $146.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
