ARIES Jeep Wrangler JL Aluminum Rear Inner Fender Liners Fender LinerARIESOriginal price was $493.95. Current price is $240.00.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
2020 - 2026 Jeep Gladiator
Confirmed to Fit
2018 - 2026 Jeep Wrangler
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes two front fender liners and mounting hardware
Warranty: Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
Finish: CARBIDE BLACK POWDER COAT
Material: Aluminum
For those who eat, sleep and breathe off-roading, ARIES fender flares show off your off-road tires better than factory flares, and they feature strong, lightweight aluminum construction to easily stand up to the elements. These front inner fender liners are designed to mount with ARIES Jeep JL fender flares and provide ultimate protection for your engine compartment against mud, water and road debris. ARIES Jeep inner fender liners are constructed from welded aluminum to not only be lightweight and rust-free, but also to offer better strength than the plastic factory fender liners. They are also covered in a highly durable carbide black powder coat finish for maximum corrosion protection. ARIES front fender liners install securely in conjunction with ARIES fender flares and include all necessary hardware for a complete installation (some drilling and rivet nut installation required). Jeep fender liners are also available for the rear or in a complete kit for the front and rear.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2026 | Jeep Gladiator | — |
| 2018 - 2026 | Jeep Wrangler | — |
The ARIES Jeep Wrangler JL Aluminum Front Inner Fender Liners Fender Liner (Part #BBDR1500550) fits 2020-2026 Jeep Gladiator models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the ARIES Jeep Wrangler JL Aluminum Front Inner Fender Liners Fender Liner (Part #BBDR1500550) is designed to fit the 2020-2026 Jeep Gladiator.
The ARIES Jeep Wrangler JL Aluminum Front Inner Fender Liners Fender Liner (Part #BBDR1500550) fits the following vehicles: 2020-2026 Jeep Gladiator; 2018-2026 Jeep Wrangler. Always verify your specific year, make, and model before ordering.
The ARIES Jeep Wrangler JL Aluminum Front Inner Fender Liners Fender Liner (Part #BBDR1500550) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes 1 driver-side inner fender liner, 1 passenger-side inner fender liner, 2 Z-hanger brackets, 2 L-hanger brackets, fasteners (M6 and M8 bolts, nuts, washers, and rivet nuts), spacer tubes, an Allen wrench, a thread-set tool with spacer, and a thread-set washer. See the Parts List on page 1 for complete quantities.
The manual states the product is for a Jeep but does not specify the model, year, or generation. Contact ARIES Automotive at 877.287.8634 or check ariesautomotive.com to confirm fitment for your specific vehicle before purchase.
You will need a ratchet, wrench set, socket set, drill, panel trim removal tool, drill bit (25/64" or 10mm), Allen wrench, and thread-set tool. The thread-set tool is included in the kit. Proper tools will improve installation quality and reduce time required.
The manual recommends that assistance may be required to hold the inner fender liner and outer fender flare in place while fasteners are started (Steps 12 and 15). While one person may be able to complete the installation, having a second person will make the process easier, especially when aligning and securing components.
The installation sequence is: (1) remove factory inner fender wells and retainers; (2) disconnect side marker light; (3) remove factory fender flare; (4) position new inner liner and mark drilling locations; (5) drill 25/64" or 10mm holes; (6) install rivet nuts using thread-set tool; (7) install Z-hanger and L-hanger brackets; (8) route side marker light wiring if used; (9) mount inner liner to brackets with snug fasteners; (10) install outer fender flare with snug fasteners; (11) fully tighten all hardware to torque specifications; (12) repeat on passenger side. See Steps 1–16 for detailed instructions.
Yes, drilling is required. You must drill 25/64" or 10mm holes in the vehicle's inner fender panel to accommodate the M6 rivet nuts that secure the new inner liner. Do not make holes larger than required or the rivet nuts may fail to install. The drill bit is not included; you must provide your own.
Drill 25/64" or 10mm holes to fit the M6 threaded metal inserts (rivet nuts) supplied with the fender liners. Do not make the holes larger than required or the rivet nuts may fail to install.
M6 bolts must be torqued to 3 ft-lbs. This applies to all M6 fasteners used to secure the inner liner to the brackets and outer fender flare.
M8 bolts must be torqued to 7 ft-lbs. This applies to the M8 hex bolts used to secure the inner liner to the frame spacer.
If your Jeep has a side marker light, you must disconnect it from the factory harness before removing the original inner fender liner (Step 3). The wiring harness must be routed and reconnected before the new inner fender liner is installed (Step 12). If no side marker light is used, this step is not necessary.
Do not use any type of polish or wax that may contain abrasives, as these could damage the finish. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or similar products. Use only mild automotive detergent for cleaning. Regular waxing with non-abrasive wax is recommended to add a protective layer.
After installation, perform periodic inspections to ensure all mounting hardware remains tight. Wax the product after installation to protect it. Regular waxing is recommended to add a protective layer over the finish. Use only non-abrasive wax and mild automotive detergent for cleaning.
Wax the product after installation and perform regular waxing to add a protective layer. Use only mild automotive detergent to clean; do not use dish detergent, abrasive cleaners, abrasive pads, or wire brushes. Do not use polish or wax containing abrasives. Perform periodic inspections to ensure all mounting hardware remains tight.
The manual does not specify the model or year. Contact ARIES Automotive at 877.287.8634 or visit ariesautomotive.com to confirm fitment before purchase.
You need a ratchet, wrench set, socket set, drill with 25/64" or 10mm bit, panel trim removal tool, Allen wrench, and thread-set tool (included). The thread-set tool is supplied in the kit.
Yes. You must drill 25/64" or 10mm holes in the inner fender panel for the M6 rivet nuts. Do not make holes larger than required.
M6 bolts: 3 ft-lbs. M8 bolts: 7 ft-lbs. Torque all hardware after snugging fasteners in place.
Assistance is recommended to hold the inner fender liner and outer fender flare in place while fasteners are started, especially during Steps 12 and 15.
Wax after installation using non-abrasive wax. Clean with mild automotive detergent only. Do not use abrasive cleaners, wire brushes, or abrasive wax. Perform periodic inspections to ensure hardware remains tight.
The most common cause is holes that are too large. The manual states: 'Do not make the holes larger than required or the rivet nuts may fail to install.' Verify that you drilled 25/64" or 10mm holes as specified. If holes are oversized, the rivet nut will not seat properly. Drill new holes at the correct size in a different location if necessary, or contact ARIES Automotive at 877.287.8634 for replacement rivet nuts.
Over-tightening the rivet nut can damage the thread-set tool and vehicle panel. The manual cautions: 'Only compress the rivet nut enough to seat it in the hole without rotating.' If the tool is damaged, stop installation and contact ARIES Automotive at 877.287.8634. Do not attempt to use a damaged tool, as it may cause further damage to the vehicle.
On Sale Today
Original price was $493.95. Current price is $240.00.You save $253.95 (51%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.