Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one pair of side bars and mounting hardware
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Color: Black
Side Component Type: Board and Bracket
When you start and end your day turning the ignition of your truck, unreliable footing just is not an option. You need a step that can bear weight with ease, provide comfortable footing and look good doing it. ARIES 4" oval side bars are sleek, strong and custom-fitted to be a highly functional extension of your truck. ARIES 4" oval side bars are made with strong 4" elliptical tubing and are available in two different finish options to allow for full customization: polished stainless steel and black powder coat carbon steel. This set of side bars is constructed from high-strength carbon steel for a solid step, and they feature a dual-layer E-coat and semi-gloss black powder coat finish for excellent protection against scratching, chipping and peeling. Something that sets the ARIES 4" oval side bar apart from all others is its blended end caps and OE-style bends. Rather than capping our side bars with a plastic cap, we offer a blended end cap for a smooth, finished appearance. We also equip the ends with a special 20-degree bend and original equipment styling to perfectly contour to your vehicle. ARIES 4" oval side bars are fitted with raised step pads to provide a wide stepping surface. The polypropylene construction will not crack over time, and because it has a textured grip, the surface is highly resistant to slips and skids, even when wet. Installation of ARIES 4" oval side bars is quick and easy with custom-fitted mounting brackets and no drilling necessary. These nerf bars fit select model years of the Chevrolet Colorado and GMC Canyon crew cab (see application info to verify fitment).
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
2 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2015 - 2026 | Chevrolet Colorado | Crew Cab Pickup · 4-Door | — |
| 2015 - 2026 | GMC Canyon | Crew Cab Pickup · 4-Door | — |
Yes, the ARIES S224051 4-Inch Oval Black Steel Nerf Bars, Select Chevrolet Colorado, GMC Canyon Crew Cab (Part #BBDRS224051) is designed to fit the 2015-2026 Chevrolet Colorado.
The ARIES S224051 4-Inch Oval Black Steel Nerf Bars, Select Chevrolet Colorado, GMC Canyon Crew Cab (Part #BBDRS224051) fits the following vehicles: 2015-2026 Chevrolet Colorado; 2015-2026 GMC Canyon. Always verify your specific year, make, and model before ordering.
The ARIES S224051 4-Inch Oval Black Steel Nerf Bars, Select Chevrolet Colorado, GMC Canyon Crew Cab (Part #BBDRS224051) fits 2015-2026 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES S224051 4-Inch Oval Black Steel Nerf Bars, Select Chevrolet Colorado, GMC Canyon Crew Cab (Part #BBDRS224051) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one driver-side bar, one passenger-side bar, six universal mounting brackets, and 24 fasteners: 12 clip nuts (8mm), 12 M8 hex bolts (1.25 x 25mm), 12 M10 hex bolts (1.50 x 30mm), 12 flat washers (8mm), 12 lock washers (8mm), 12 flat washers (10mm), and 12 lock washers (10mm).
You will need a torque wrench, 13mm socket, 16mm socket, flathead screwdriver, and a level. The level is used to ensure the side bars are properly aligned during installation.
The mounting brackets are described as universal in the parts list. However, the manual does not specify which vehicles or vehicle types are compatible. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your specific vehicle.
The manual does not specify removal of any components before installation. You will need to access three mounting locations underneath the vehicle on each side. Consult the manual or contact ARIES Automotive if you need clarification on accessing these locations on your specific vehicle.
1. Locate the three mounting locations underneath the driver side. 2. At the front driver-side location, remove hole plugs and insert two clip nuts. 3. Install the front mounting bracket with two M8 bolts, lock washers and flat washers; snug but do not fully tighten. 4. Repeat for middle and rear brackets. 5. Place the driver-side bar on the brackets and secure with M10 bolts, lock washers and flat washers; snug but do not fully tighten. 6. Adjust and level the side bar. 7. Tighten all bracket fasteners first, then side bar connections. 8. Repeat steps 1–7 on the passenger side.
Snugging fasteners allows you to adjust and level the side bar before final tightening. The manual recommends tightening all bracket fasteners to the vehicle first, then tightening the side bar connections. This sequence ensures proper alignment and level positioning.
Three mounting brackets are used per side bar. The manual specifies three mounting locations on each side of the vehicle: front, middle, and rear.
M8 hex bolts (1.25 x 25mm) are used to secure the mounting brackets to the vehicle. Each bracket requires two M8 bolts, along with two M8 flat washers and two M8 lock washers.
M10 hex bolts (1.50 x 30mm) are used to secure the side bar to the mounting brackets. Each mounting location uses one M10 bolt, one M10 lock washer, and one M10 flat washer.
The manual does not provide torque values for the M8 or M10 bolts. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM for the correct torque specifications.
Clip nuts (8mm) are fasteners that grip into pre-existing holes on the vehicle. During S224051 installation, you insert a clip nut through an access hole and align it over an adjacent smaller hole, then secure the mounting bracket with M8 bolts. Two clip nuts are used per bracket location.
Periodic inspections should be performed to ensure all mounting hardware remains tight. Wax the product after installation to protect the finish. Regular waxing is recommended to add a protective layer. Do not use polish or wax containing abrasives, as these can damage the finish. For gloss black finishes, mild soap may be used for cleaning.
Do not use any type of polish or wax that may contain abrasives, as these can damage the finish. For gloss black finishes, mild soap may be used to clean the product. Regular waxing with non-abrasive products is recommended to add a protective layer.
The S224051 uses universal mounting brackets, but vehicle compatibility is not specified in the manual. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your specific vehicle.
You will need a torque wrench, 13mm socket, 16mm socket, flathead screwdriver, and a level.
The manual rates installation difficulty as 'Easy' and does not require professional installation. However, you will need the specified tools and should follow all steps carefully.
The manual does not provide torque specifications. Contact ARIES Automotive at 877.287.8634 for the correct torque values for M8 and M10 bolts.
Perform periodic inspections to ensure all mounting hardware remains tight. Wax the product after installation and regularly thereafter using non-abrasive products. For gloss black finishes, clean with mild soap.
The manual does not mention drilling. The installation uses existing mounting locations underneath the vehicle and clip nuts that grip into pre-existing holes.
The manual does not specify an installation time. It rates the difficulty as 'Easy' and recommends using proper tools to improve quality and reduce time required.
On Sale Today
Original price was $451.95. Current price is $256.00.You save $195.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Atlanta, GAFREE SHIPPING
Estimated delivery Mon, Aug 31 - Wed, Sep 2
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
