Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes headache rack and mounting hardware
Headache rack may interfere with rear-facing cameras
Not designed to support cargo loads
Warranty: Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
Finish: CARBIDE BLACK POWDER COAT
Material: Blank
The ARIES Switchback headache rack is an aggressive, off-road-style truck headache rack that features rust-free construction, an LED-compatible top edge and a patented installation system -- all to make sure your truck not only stands out on the road, but also has the backbone to tackle the trail. The Switchback truck headache rack is built with all-aluminum construction, meaning you will never have to worry about rust. Aluminum offers solid strength while helping to keep your truck lightweight. The aluminum alloy is also protected with a highly durable carbide black powder coat finish that maximizes corrosion resistance and adds a sleek finishing touch. The Switchback is built to readily accept aftermarket lighting. Its top edge is a slotted channel that accepts LED light bars or work lights. Three 10" LED light bars (ARIES #1501260) are recommended. The slotted channel allows for easy installation of the lights and adjustable positioning. Installing the ARIES Switchback aluminum headache rack couldn't be easier with our patented mounting system. It features unique stake pocket anchors that requires no drilling or complicated procedures. Simply drop it in, tighten a single bolt on each side, and you're ready to hit the trails. The Switchback also features a three-piece assembly, making it easier to ship, and allowing you to mount the headache rack without the center section for easy access to the rear cab window. Each ARIES Switchback headache rack is designed for vehicle-specific installation for a custom fit. This particular model fit specific years of the Toyota Tundra (see application info to verify fitment). Brackets and mounting hardware are included.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2007 - 2021 | Toyota Tundra | Extended Cab Pickup · 4-Door | — |
The ARIES Switchback Black Aluminum Headache Rack, Select Toyota Tundra Truck Cab Protector / Headache Rack (Part #BBDR1110117) fits the following vehicles: 2007-2021 Toyota Tundra. Always verify your specific year, make, and model before ordering.
Yes, the ARIES Switchback Black Aluminum Headache Rack, Select Toyota Tundra Truck Cab Protector / Headache Rack (Part #BBDR1110117) is designed to fit the 2007-2021 Toyota Tundra.
The ARIES Switchback Black Aluminum Headache Rack, Select Toyota Tundra Truck Cab Protector / Headache Rack (Part #BBDR1110117) fits 2007-2021 Toyota Tundra models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES Switchback Black Aluminum Headache Rack, Select Toyota Tundra Truck Cab Protector / Headache Rack (Part #BBDR1110117) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes three headache rack sections (driver/left, passenger/right, and center/middle), one center mesh panel, two stake pocket clamps, eight M8 hex bolts (1.25 x 25mm), eight M8 hex flange lock nuts, two M14 bolts (2.0 x 80mm), two M14 flat washers, two M14 lock washers, and eight adhesive wire ties.
The center mesh panel is optional. During Step 3, you determine whether to install the center mesh or leave the center open. Both configurations are supported by the assembly design.
The headache rack is designed for truck beds equipped with stake pockets. The manual does not specify vehicle makes, models, years, or bed lengths. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your specific vehicle.
Yes, you must remove the plastic stake pocket covers from both the driver and passenger sides (Step 1). However, some vehicles have removable covers that simply pull out, while others may require cutting. Check your vehicle first—if the covers are removable, no cutting is necessary.
Not all vehicles have stake pocket plugs. If your vehicle does have plugs, they must be removed using a flathead screwdriver (Step 2) only if they interfere with the stake pocket clamps. If there is no plug or it does not interfere, removal is not necessary.
Required tools are: ratchet, 13mm socket, 22mm socket, utility knife, flathead screwdriver, 13mm open end wrench, and needle nose pliers. The needle nose pliers may be needed to remove the clamp from the stake pocket if it is tight.
Yes, assistance is recommended. Step 7 explicitly states 'With assistance, hold the assembled headache rack in position over the stake pockets.' The manual also notes to 'place something between the headache rack and the cab of the truck or find assistance while inserting and tightening the rack down' to protect the cab.
1. Lay the driver-side, passenger-side, and center sections face down on a flat surface (Step 3). 2. Align the four mounting holes on the driver and passenger assemblies with the four holes on each side of the center assembly. 3. Loosely insert eight M8 x 25mm hex bolts from the inside with eight M8 hex flange lock nuts (Step 4). 4. Ensure proper alignment, then tighten all hardware to 15 ft-lbs.
Place the assembled headache rack on a work table with the slotted ends hanging off the sides. Insert an M14 bolt, M14 lock washer, and M14 flat washer through each slot and attach to the stake pocket clamp, which hangs down from the bottom of the rack (Step 6). Repeat for both driver and passenger sides.
If the clamp does not fully open on both sides, bending of the tabs may be required (Step 5). Use needle nose pliers to carefully bend the tabs as needed to allow the clamp to open fully and hook on both sides of the stake pocket.
With assistance, hold the assembled headache rack in position over the stake pockets. Squeeze the stake pocket clamps to a closed position, lower them into the stake pockets, then slide the headache rack into the desired location, ensuring it is centered on the vehicle (Step 7). Place something between the headache rack and the cab to protect the cab during this process.
M8 bolts should be tightened to 15 ft-lbs. This applies to the eight M8 x 25mm hex bolts that secure the three headache rack sections together (Step 4).
The manual does not specify a torque value for the M14 bolts. However, Step 8 instructs to 'carefully tighten the M14 hex bolts' only enough to eliminate movement and fully compress the lock washer. Do not overtighten, as this may damage the bed rail and void the warranty. Contact ARIES Automotive at 877.287.8634 for the recommended torque specification.
The manual provides these metric torque specifications: M6 bolt = 3 ft-lbs, M8 bolt = 7 ft-lbs, M10 bolt = 16 ft-lbs, M12 bolt = 28 ft-lbs. However, the M8 bolts on this headache rack are tightened to 15 ft-lbs (not the standard 7 ft-lbs) per Step 4. Use the specific torque values stated in the installation steps unless otherwise noted.
Wax the headache rack after installing to protect the product. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives, as these could damage the finish. For polished, gloss, and other smooth finishes, non-abrasive polish may be used to clear small scratches and scuffs.
Use only mild automotive detergent to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes, or other similar products, as these may damage the finish.
Only tighten the M14 clamp bolts enough to eliminate movement in the headache rack and fully compress the lock washer. Overtightening the clamps may result in damage to the bed rail and void the warranty.
Periodic inspections should be performed to ensure all mounting hardware remains tight. Check the eight M8 bolts connecting the sections and the two M14 stake pocket clamp bolts. Refer to the 'Notes and Maintenance' section for finish care and protection instructions.
The headache rack fits truck beds with stake pockets. The manual does not list specific vehicle models or years. Contact ARIES at 877.287.8634 or ARIESAUTOMOTIVE.COM to confirm fitment for your vehicle.
You need a ratchet, 13mm and 22mm sockets, 13mm open end wrench, utility knife, flathead screwdriver, and needle nose pliers.
Yes, assistance is required to hold the assembled rack in position over the stake pockets and to protect the truck cab during installation.
Tighten the eight M8 x 25mm bolts that connect the headache rack sections to 15 ft-lbs.
Only tighten the M14 clamp bolts enough to eliminate movement and fully compress the lock washer. Overtightening may damage the bed rail and void the warranty.
Perform periodic inspections to ensure all mounting hardware remains tight. Wax the headache rack regularly and clean only with mild automotive detergent.
On Sale Today
Original price was $1,127.95. Current price is $600.00.You save $527.95 (47%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Sat, Aug 29 - Mon, Aug 31
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
