Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2001 - 2005 Volkswagen Jetta
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45510, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45510, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 40
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Volkswagen Jetta (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2001 - 2005 | Volkswagen Jetta | Wagon · 4-Door | Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
Yes, the CURT 110833 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Jetta (Part #BKDK110833) is designed to fit the 2001-2005 Volkswagen Jetta.
The CURT 110833 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Jetta (Part #BKDK110833) fits 2001-2005 Volkswagen Jetta models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 110833 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Jetta (Part #BKDK110833) fits the following vehicles: 2001-2005 Volkswagen Jetta. Always verify your specific year, make, and model before ordering.
The CURT 110833 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Jetta (Part #BKDK110833) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part number 11083 (also listed as 247422) is designed for 2001–2005 Volkswagen Jetta Wagon models. Confirm your vehicle year falls within this range before purchasing.
The manual lists a gross load capacity when used as a weight-carrying hitch, but the specific trailer weight and tongue weight capacities are not filled in on this copy of the manual. Contact Curt Manufacturing or your dealer with the part number 11083 to confirm the exact towing and tongue weight ratings. Do not exceed your vehicle manufacturer's recommended towing capacity.
The Curt 11083 is designed for use with ball mount part number D-55010 or 45510. Use only these approved ball mounts to ensure safe operation.
The kit includes: one 1/2-13 handle nut, one 1/2-13 × 1 1/4 hex bolt with conical toothed washer, and five 3/8-16 × 1 1/4 hex bolts with fender washers and hex flange nuts (HFN3816). All fasteners are provided; no additional hardware is required.
Yes. Temporarily remove the plastic tray and its contents from under the rear floor before drilling. You should also lower the exhaust to ease installation. These steps are necessary to access the mounting area and prevent damage during drilling.
Yes, drilling is required. The installation involves drilling four holes on the driver side and one hole on the passenger side using the hitch as a template. The passenger side slot aligns with an existing hole in the tow hook loop bracket, but the other five mounting holes must be drilled.
1. Temporarily remove the plastic tray and contents under the rear floor and lower the exhaust. 2. Lift the hitch into position, aligning the slot in the passenger side plate with the existing hole in the tow hook loop bracket. Loosely install fasteners. 3. With the hitch level and square to the vehicle, drill four holes on the driver side using the hitch as a template and install fasteners. 4. Drill the remaining mounting hole on the passenger side using the hitch as a template and install fasteners. 5. Torque all fasteners to specification.
Torque the 1/2" hardware to 110 lb.-ft. and the 3/8" hardware to 45 lb.-ft. This includes the 1/2-13 hex bolt and the five 3/8-16 hex bolts. Ensure all fasteners are properly torqued before using the hitch.
Do not exceed your vehicle manufacturer's recommended towing capacity. While the Curt 11083 has a gross load capacity rating, you must comply with the lower of either the hitch rating or your vehicle's manufacturer specification. Consult your vehicle's owner manual for the maximum towing capacity.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended to maintain safe operation.
Curt Manufacturing warrants the product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation.
Yes, the Curt 11083 is designed for 2001–2005 Volkswagen Jetta Wagon models.
Yes. You must drill four holes on the driver side and one hole on the passenger side using the hitch as a template. The passenger side slot aligns with an existing hole.
Torque 1/2" hardware to 110 lb.-ft. and 3/8" hardware to 45 lb.-ft.
Temporarily remove the plastic tray and contents under the rear floor and lower the exhaust to ease installation.
Use ball mount part number D-55010 or 45510, which are designed for use with the Curt 11083.
Yes. Periodically check all fasteners are tight and structural components are sound before towing.
Total for 5 items:
$487.57$652.53
On Sale Today
Original price was $501.95. Current price is $336.99.You save $164.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.