Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2012 - 2022 Volkswagen Passat
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Volkswagen Passat (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2022 | Volkswagen Passat | No Drilling Required Installation Time: 30-60 minutes Excluding hands free trunk Visibility: Concealed |
Yes, the CURT 112343 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Passat (Part #BKDK112343) is designed to fit the 2012-2022 Volkswagen Passat.
The CURT 112343 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Passat (Part #BKDK112343) fits the following vehicles: 2012-2022 Volkswagen Passat. Always verify your specific year, make, and model before ordering.
The CURT 112343 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Passat (Part #BKDK112343) fits 2012-2022 Volkswagen Passat models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 112343 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Volkswagen Passat (Part #BKDK112343) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT hitch 11234 is designed for 2012-Present Volkswagen Passat sedans. Before purchasing, confirm your vehicle matches this application and that you have not exceeded the vehicle manufacturer's recommended towing capacity of 2,000 lbs trailer weight and 200 lbs tongue weight.
The manual specifies this hitch is designed for the Passat sedan only. Compatibility with wagon models is not documented.
The hitch is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer (wheel-less) loads can be applied to this hitch, but they must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads with these straps will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on the 18050 straps.
The hitch is designed for use with ball mount #D-55001 or #45501. Euro mount options are also available: #45571 (1-7/8" ball) or #45572 (2" ball).
Required tools are: ratchet, torque wrench, 3/4" socket, 10mm socket, 9" extension, T-15 torx bit socket, T-25 torx bit socket, rotary cutting tool, masking tape, tape measure, silicone caulk, and safety glasses.
No, drilling is not required. However, fascia trimming is required, and you will need to remove drain plugs and temporarily remove the spare tire.
Yes, fascia trimming is required. You must mark and trim the rear plastic fascia using the Fascia Trim Diagram provided. Dimensions are approximate; you must confirm fit prior to trimming. If an underbody panel is present, it must also be marked and trimmed using the Underbody Trim Diagram.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Professional installation time is approximately 60 minutes. Novice (DIY) installation time is approximately 30 minutes.
The kit includes: 4× hex bolts (1/2-13 x 5 1/2), 4× conical toothed washers (1/2"), 2× carriage bolts (1/2-13 x 1 1/2), 2× spacer plates (CM-SP62), 2× hex flange nuts (HFN 1213), and 2× nut plate weldments (11234-NPWA).
Yes, the spare tire must be temporarily removed from inside the trunk during installation. It is reinstalled in Step 9 after the hitch is secured and torqued.
The two rearmost rubber drain plugs must be removed from the bottom of the trunk pan. These are returned to the owner. The drain holes are then sealed with silicone caulk, and spacer plates and carriage bolts are inserted into these holes from below.
According to the Fascia Trim Diagram, trim 2.50 inches from the center of the vehicle and 4.75 inches from the center. The underbody panel trim dimension is 5.50 inches from the center. Note: these dimensions are approximate; you must confirm fit prior to trimming.
Torque all 1/2" x 1 1/2" hardware (carriage bolts) to 110 ft-lbs. Torque all 1/2" x 5 1/2" hardware (hex bolts) to 75 ft-lbs.
The hitch should be loosely secured into position first using the 1/2-13 x 5" hex bolts and 1/2" conical toothed washers. The fasteners are then fully torqued in Step 8 after all hardware is in place.
Silicone caulk is used to seal around the drain holes in the trunk pan before the hitch is raised into position. This prevents water intrusion into the trunk.
The nut plates (11234-NPWA) are placed on top of the bumper beam supports after gently flexing the rear fascia. The hitch is then raised into position, aligning the slots in the hitch with the holes in the nut plates.
A CM-SP62 spacer plate and 1/2-13 x 1 1/2" carriage bolt are inserted into each of the two drain holes. The bolts are secured from below (underneath the vehicle) with 1/2" hex flange nuts and torqued to 110 ft-lbs.
Two outer fascia screws and clips are reinstalled through the bumper fascia and into the trunk pan. One screw and clip are removed and returned to the owner. If an underbody panel was removed, it is also reinstalled.
Safety glasses must be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. Using proper tools will greatly improve the quality of the install and reduce the time required.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This maintenance is essential for safe operation.
The manual recommends periodically checking the receiver hitch to ensure all fasteners are tight and all structural components are sound. A specific interval is not provided; consult the manufacturer at 800.798.0813 or www.curtmfg.com for detailed maintenance schedules.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes incidental or consequential loss or damage.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, for 2012-Present Passat sedans. Maximum towing capacity is 2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended capacity.
No drilling required. Fascia trimming is required. Spare tire must be temporarily removed. Installation takes approximately 60 minutes (professional) or 30 minutes (novice).
Ratchet, torque wrench, 3/4" and 10mm sockets, 9" extension, T-15 and T-25 torx bits, rotary cutting tool, masking tape, tape measure, silicone caulk, and safety glasses.
1/2" x 1 1/2" carriage bolts: 110 ft-lbs. 1/2" x 5 1/2" hex bolts: 75 ft-lbs.
Two people may be required to ease installation. If hesitant, contact an authorized CURT installer at 800.798.0813.
Yes, but non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to use straps voids the warranty.
2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Total for 5 items:
$457.56$608.52
On Sale Today
Original price was $459.95. Current price is $308.99.You save $150.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Wed, Aug 12 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.