Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2012 - 2017 Buick Verano
Confirmed to Fit
2011 - 2015 Chevrolet Cruze
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45522, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45522, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Buick Verano and Chevrolet Cruze (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94942 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2017 | Buick Verano | No Drilling Required Installation Time: 30-60 minutes Excluding dual exhaust Undercar Trimming: required Undercar Trimming (Not Fascia): Yes Visibility: Concealed |
| 2011 - 2015 | Chevrolet Cruze | No Drilling Required Installation Time: 30-60 minutes Undercar Trimming: required Undercar Trimming (Not Fascia): Yes Visibility: Concealed |
Yes, the CURT 112823 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chevrolet Cruze, Buick Verano (Part #BKDK112823) is designed to fit the 2012-2017 Buick Verano.
The CURT 112823 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chevrolet Cruze, Buick Verano (Part #BKDK112823) fits 2012-2017 Buick Verano models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 112823 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chevrolet Cruze, Buick Verano (Part #BKDK112823) fits the following vehicles: 2012-2017 Buick Verano; 2011-2015 Chevrolet Cruze. Always verify your specific year, make, and model before ordering.
The CURT 112823 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chevrolet Cruze, Buick Verano (Part #BKDK112823) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Part number 11282 is designed for 2011-present Chevrolet Cruze and Buick Verano sedans, excluding diesel models. Confirm your vehicle matches this year range, make, model, and body style before purchasing. If you have a diesel-powered Cruze or Verano, this hitch is not compatible.
This hitch is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
Yes, but all non-trailer (wheel-less) loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
This hitch is designed for use with ball mount #D-221 or #45522. Euro mount options are available: #45591 (1-7/8" ball) or #45592 (2" ball). Verify the correct ball mount for your trailer before installation.
You will need: a ratchet, torque wrench, 3/4" socket, 13mm socket, aviation shears, safety glasses, and a tape measure. A socket set with both metric and standard sizes will cover the fastener requirements.
No. This hitch installation requires no drilling. It uses existing frame holes and access holes, and fasteners are installed using the fishwire technique to thread hardware through the frame.
Only if a heat shield is present on your vehicle. If present, you must trim it to access the frame access hole. The trim dimensions are approximately 2.50 inches by 2.25 inches, but you should confirm the exact dimensions on your vehicle before trimming. Use aviation shears for this task.
Yes. Before installation, lower the exhaust by removing two rubber isolators from the muffler towards the center of the vehicle and removing the bolt securing the rearmost hanger to the frame. After the hitch is secured, raise the exhaust back into position. Note that exhaust configuration varies depending on the model.
Two people may be required to ease installation. While one person may be able to complete the installation, having a second person will help with managing the exhaust system, positioning the hitch, and securing fasteners.
All 7/16" hardware (carriage bolts and flange nuts) must be torqued to 70 ft-lbs. Use a calibrated torque wrench to ensure proper tightness. This is the final step after the hitch is raised into position.
The hitch includes: 4 hex flange nuts (7/16-14), 4 carriage bolts (7/16-14 x 1 1/4"), 4 square hole spacers (CM-SP2, .250 x .88 x 2.25"), and 2 pieces of 7/16" fishwire. All fasteners are 7/16" size and use the fishwire installation technique.
The fishwire technique threads the 7/16" carriage bolts and CM-SP2 spacers through the frame access holes and out the mounting holes. The bolts are then secured with 7/16" flange nuts. A fishwire technique diagram is provided on page 2 of the manual for visual reference.
Safety glasses must be worn at all times during installation. Read all instructions thoroughly before beginning. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for assistance. Technical support is available at 800.798.0813.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, if it is a 2011-present sedan model and not diesel-powered. Confirm your vehicle matches these specifications before purchasing.
2,000 lbs trailer weight and 200 lbs tongue weight maximum. Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling is required. The hitch uses existing frame holes and the fishwire installation technique.
Ratchet, torque wrench, 3/4" socket, 13mm socket, aviation shears, safety glasses, and tape measure.
Yes. Remove two rubber isolators from the muffler and the rearmost hanger bolt from the frame. Raise it back after installation.
All 7/16" hardware must be torqued to 70 ft-lbs using a calibrated torque wrench.
Safety glasses must be worn at all times. If hesitant, contact an authorized CURT installer at 800.798.0813.
On Sale Today
Original price was $365.95. Current price is $247.99.You save $117.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Wed, Aug 12 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$396.56$514.52
No reviews have been added for this product.