Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2012 - 2017 Toyota Prius C
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires underbody panel removal
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521 (trailer ball sold separately), hardware, pin & clip
Includes ball mount #45521 (trailer ball sold separately), hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Toyota Prius C (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2017 | Toyota Prius C | No Drilling Required Installation Time: 30-60 minutes Remove Underbody Panel: Permanently Visibility: Concealed |
The CURT 114843 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Toyota Prius C (Part #BKDK114843) fits 2012-2017 Toyota Prius C models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 114843 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Toyota Prius C (Part #BKDK114843) is designed to fit the 2012-2017 Toyota Prius C.
The CURT 114843 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Toyota Prius C (Part #BKDK114843) fits the following vehicles: 2012-2017 Toyota Prius C. Always verify your specific year, make, and model before ordering.
The CURT 114843 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Toyota Prius C (Part #BKDK114843) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 11484 is designed for 2012-Present Toyota Prius C Hatchback models. Before purchasing, verify your vehicle matches this specification and that you have the hatchback body style.
The hitch is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your vehicle's owner manual for the final limit.
Non-trailer loads can be attached, but they must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads with these straps will void the product warranty. See the CURT catalog or www.curtmfg.com for stabilizing strap information.
You will need: ratchet, torque wrench, 12mm socket, 13mm socket, screwdriver, and safety glasses. A torque wrench is essential because all M8 fasteners must be torqued to exactly 23 ft-lbs.
The kit includes 6 M8-1.25 x 30 hex head bolts (Class 10.9) and 6 conical toothed washers (3/8"). These are used to secure the hitch to the frame rails. The hitch is designed for use with ballmount #45521, and euro mount options #45571 (1-7/8") and #45572 (2") are available separately.
Yes. You must remove the center underbody panel (5 plunger-style fasteners) and the 2 plunger-style fasteners that secure the fascia tabs to the trunk pan. You must also remove the 6 bolts that secure the bumper supports to the frame rails. Save the fascia tab fasteners for reinstallation; return the other fasteners and panel to the owner.
No. The manual explicitly states 'NO DRILLING' is required. The hitch uses existing weldnuts on the frame rails.
Two people may be required to ease installation. The manual recommends supporting the bumper when removing the 6 fasteners that secure the bumper supports to the frame rails, which is easier with a second person.
1. Remove the center underbody panel (5 plunger fasteners); return fasteners and panel to owner. 2. Remove 2 plunger fasteners securing fascia tabs to trunk pan; save these fasteners. 3. Remove 6 bolts securing bumper supports to frame rails; support the bumper while doing this; return bolts to owner. 4. Gently flex fascia tabs back and raise hitch into position. Secure hitch to frame rails using supplied M8 hex bolts and 3/8" conical washers. 5. Torque all M8 hardware to 23 ft-lbs. 6. Secure fascia tabs using the fasteners removed in Step 2.
All M8 hex head bolts must be torqued to 23 ft-lbs. Use a torque wrench to ensure accuracy. This applies to all 6 bolts that secure the hitch to the frame rails.
After installation, verify that all M8 fasteners are torqued to 23 ft-lbs and that the fascia tabs are securely fastened. The manual recommends periodically checking the receiver hitch to ensure all fasteners remain tight and all structural components are sound.
The manual recommends periodically checking the receiver hitch to ensure all fasteners are tight and all structural components are sound. No specific interval is provided; inspect before each towing trip and at regular maintenance intervals.
Wear safety glasses at all times during installation. Support the bumper when removing the 6 fasteners that secure the bumper supports to the frame rails to prevent injury. If you are hesitant to undertake this task, contact an authorized CURT installer for assistance.
The hitch is designed for use with ballmount #45521. Euro mount options are available: #45571 (1-7/8") and #45572 (2" ball). These must be purchased separately.
No permanent modifications are required. The installation involves removing and reinstalling factory fasteners and panels. The 6 factory bolts that secure the bumper supports are removed and returned to the owner; the hitch uses existing weldnuts on the frame rails.
Yes, the CURT 11484 is designed for 2012-Present Toyota Prius C Hatchback models. Maximum towing capacity is 2,000 lbs trailer weight and 200 lbs tongue weight, but never exceed your vehicle manufacturer's recommended limit.
You need a ratchet, torque wrench, 12mm socket, 13mm socket, screwdriver, and safety glasses. A torque wrench is essential because all M8 bolts must be torqued to exactly 23 ft-lbs.
No, drilling is not required. The hitch uses existing weldnuts on the frame rails.
No, you do not need to remove the bumper. You must remove the center underbody panel, the fascia tab fasteners, and the 6 bolts securing the bumper supports to the frame rails. Support the bumper when removing these fasteners.
All M8 hex head bolts must be torqued to 23 ft-lbs using a torque wrench.
The hitch is rated for 2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to use these straps voids the warranty.
Total for 5 items:
$382.56$493.52
On Sale Today
Original price was $344.95. Current price is $233.99.You save $110.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 17 - Wed, Aug 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.