CURT 115253 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda AccordCURTIn Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2013 - 2017 Honda Accord
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Honda Accord (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2017 | Honda Accord | No Drilling Required Installation Time: 30-60 minutes Undercar Trimming: Yes Visibility: Exposed |
The CURT 116813 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Accord (Part #BKDK116813) fits the following vehicles: 2013-2017 Honda Accord. Always verify your specific year, make, and model before ordering.
Yes, the CURT 116813 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Accord (Part #BKDK116813) is designed to fit the 2013-2017 Honda Accord.
The CURT 116813 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Accord (Part #BKDK116813) fits 2013-2017 Honda Accord models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 116813 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Accord (Part #BKDK116813) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 11681 is designed for all 2013 Honda Accord models. The hitch is a weight-carrying receiver hitch rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight. Always verify your vehicle's manufacturer-recommended towing capacity before towing, as you must never exceed it.
CURT 11681 is designed for use with ball mount #D-55001 or #45501. Euro mount options are available: #45571 (1-7/8" ball) and #45572 (2" ball). Consult the CURT catalog or visit www.curtmfg.com for additional ball mount options.
The CURT 11681 is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity. For the 2013 Honda Accord, verify the vehicle's specific towing limits before towing.
Required tools are: ratchet, 10mm socket, 9/16" socket, 11/16" socket, torque wrench, aviation shears, tape measure, and pry bar. Safety glasses must be worn at all times during installation. Using proper tools will greatly improve installation quality and reduce installation time.
No, drilling is not required. The CURT 11681 uses existing frame rail access holes and fishwire hardware to route fasteners through the frame without drilling.
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Fishwire is used to route 7/16"-14 x 1 1/4" carriage bolts with CM-SP2 spacers through access holes in both frame rails without drilling. The fishwires are attached to the hardware and fed through the frame rail access holes. Leave fishwires attached during this step to prevent loss of hardware inside the frame rail. After the hitch is positioned, remove the fishwires and attach the 7/16"-14 hex flange nuts to the carriage bolts.
Yes, the exhaust must be lowered before installation. Remove two rubber exhaust isolators for single exhaust vehicles or three isolators for dual exhaust vehicles. After the hitch is installed and heat shields are trimmed and reinstalled, raise the exhaust and reattach the rubber isolators.
Yes, heat shield trimming is required. Remove heat shield(s) by removing four fasteners per shield and save the fasteners for reinstallation. After the hitch is positioned, trim the heat shield(s) around the hitch. Trim dimensions are approximate; confirm fit prior to trimming. Reinstall heat shield(s) with the hardware removed earlier. Note that one fastener per shield will not be reinstalled.
Torque all 7/16" hardware to 70 ft-lbs and all 3/8" hardware to 45 ft-lbs. This includes the 7/16"-14 carriage bolts and hex flange nuts, and the 3/8"-16 U-bolt hex flange nuts.
The CURT 11681 includes: 2 carriage bolts (7/16"-14 x 1 1/4"), 2 CM-SP2 square hole spacers (.250 x .88 x 2.25"), 2 hex flange nuts (7/16"-14), 1 U-bolt (3/8"-16 x 1.00 x 1.88), 2 hex flange nuts (HFN3816, 3/8"-16), and 2 pieces of 7/16" fishwire.
The installation sequence is: (1) lower exhaust by removing rubber isolators, (2) remove heat shield(s) and save fasteners, (3) fishwire carriage bolts with spacers through frame rail access holes, (4) insert U-bolt through tow hook, (5) insert fishwires through hitch mounting holes and raise hitch into position, secure with 3/8" hex flange nuts, remove fishwires and attach 7/16" hex flange nuts, (6) torque all fasteners, (7) trim and reinstall heat shield(s), (8) raise exhaust and reattach isolators.
The CURT 11681 is rated for 2,000 lbs trailer weight and 200 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity. The actual limit for your 2013 Honda Accord may be lower than the hitch rating, so verify your vehicle's specifications before towing.
All non-trailer loads (wheel-less loads) applied to the CURT 11681 must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the hitch during use.
CURT Manufacturing warrants the CURT 11681 to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, CURT 11681 is designed for all 2013 Honda Accord models. Maximum capacity: 2,000 lbs trailer weight, 200 lbs tongue weight. Never exceed your vehicle's manufacturer-recommended towing capacity.
No drilling required. The hitch uses existing frame rail access holes and fishwire hardware to route fasteners through the frame.
Yes, heat shield trimming is required. Remove heat shields, trim around the hitch (dimensions are approximate—confirm fit before trimming), and reinstall with original fasteners. One fastener per shield will not be reinstalled.
Torque all 7/16" hardware to 70 ft-lbs and all 3/8" hardware to 45 ft-lbs.
Ratchet, 10mm/9/16"/11/16" sockets, torque wrench, aviation shears, tape measure, pry bar, and safety glasses. Two people may be required.
All non-trailer (wheel-less) loads must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads voids the warranty.
Yes. Remove two rubber exhaust isolators (single exhaust) or three (dual exhaust) before installation. Reattach them after the hitch and heat shields are installed.
Periodically check that all fasteners are tight and all structural components are sound.
Total for 5 items:
$372.56$478.52
On Sale Today
You save $105.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.