Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2016 Chrysler Town & Country
Confirmed to Fit
2008 - 2020 Dodge Grand Caravan
Confirmed to Fit
2012 - 2015 Ram C/V
Confirmed to Fit
2009 - 2014 Volkswagen Routan
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45016, pin & clip (Uses pre-existing vehicle hardware for installation)
Trailer ball sold separately
Includes ball mount #45016, pin & clip (Uses pre-existing vehicle hardware for installation)
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 45
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Chrysler Town & Country, Dodge Grand Caravan, Ram C/V and Volkswagen Routan (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94944 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2016 | Chrysler Town & Country | Bumper Fascia Trimming Required - No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 2008 - 2020 | Dodge Grand Caravan | Bumper Fascia Trimming Required - No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 2012 - 2015 | Ram C/V | Bumper Fascia Trimming Required - No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 2009 - 2014 | Volkswagen Routan | Bumper Fascia Trimming Required - No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 122643 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chrysler, Dodge, Ram, Volkswagen Minivans (Part #BKDK122643) fits the following vehicles: 2008-2016 Chrysler Town & Country; 2008-2020 Dodge Grand Caravan; 2012-2015 Ram C/V; 2009-2014 Volkswagen Routan. Always verify your specific year, make, and model before ordering.
The CURT 122643 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chrysler, Dodge, Ram, Volkswagen Minivans (Part #BKDK122643) fits 2008-2016 Chrysler Town & Country models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 122643 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chrysler, Dodge, Ram, Volkswagen Minivans (Part #BKDK122643) is designed to fit the 2008-2016 Chrysler Town & Country.
The CURT 122643 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Chrysler, Dodge, Ram, Volkswagen Minivans (Part #BKDK122643) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Part number 12264 is designed for Dodge Grand Caravan SXT, Chrysler Town and Country Touring (all Stow & Go models), Volkswagen Routan S, SE, SEL, and Ram Cargo Van. If your vehicle is one of these models, it will fit. If you have a different vehicle, this hitch is not compatible.
Curt 12264 is designed for use with Ball Mount #D-224.
The manual specifies a gross load capacity when used as a weight-carrying hitch of 3,500 lbs trailer weight and 350 lbs tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
You will need: 3/8" drive ratchet, 18mm socket (3/8" drive), 15mm socket (3/8" drive), 13mm socket (3/8" drive), torque wrench, screwdriver or punch, and utility knife. No power tools are required.
No. The Curt 12264 requires no drilling. It uses existing vehicle fasteners and mounting points.
Yes. You must remove the bolt(s) holding the exhaust and muffler hanger(s) in Step 1 to allow the exhaust to drop down out of the way during hitch installation. After the hitch is mounted, you will raise the muffler and reinstall the exhaust bolts in Step 5.
Fascia trimming may be required. The manual includes a trim diagram and recommends using a utility knife for any necessary trimming. Refer to the trim diagram provided in the manual for the specific areas that may need trimming on your vehicle.
The manual does not specify that the battery must be disconnected for installation of this hitch.
The hitch may interfere with AC lines if present on your vehicle. During Step 2 of installation, you must ensure that air conditioning lines are not pinched between the hitch and frame rail. The manual includes a caution warning about this.
In Step 1, locate and remove: (2) bolts using a 15mm socket and (3) bolts using an 18mm socket. Leave (1) 12mm bolt on the passenger side of the vehicle frame toward the front, which holds the bumper bracket to the vehicle frame. This bolt must remain in place to hold the bumper beam in position.
The Curt 12264 uses existing vehicle hardware. It mounts using existing 10mm and 12mm bolts that are already in your vehicle frame. No new fasteners are supplied with the hitch.
Torque all 10mm fasteners to 48 lb-ft and all 12mm fasteners to 83 lb-ft. Use a torque wrench to ensure proper tightening.
Yes. In Step 2, raise the hitch into position against the bottom of the vehicle frame and align the holes in the hitch frame brackets with the holes in the vehicle frame. You may need a punch or screwdriver to align the holes, as noted in Step 3.
Yes. The manual notes that rotating the exhaust hanger bracket before tightening will add clearance between the side bracket and exhaust. This can help prevent interference.
All non-trailer loads applied to this hitch must be supported by Curt 18050 Stabilizing Straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. While the hitch has a gross load capacity of 3,500 lbs trailer weight and 350 lbs tongue weight, your vehicle's manufacturer may specify a lower limit. Always follow your vehicle manufacturer's towing capacity.
After installation, periodically check that all fasteners are tight and that all structural components are sound. This is especially important before towing.
You should periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended.
Yes, Curt 12264 is designed for Dodge Grand Caravan SXT, Chrysler Town and Country Touring (all Stow & Go models), Volkswagen Routan S/SE/SEL, and Ram Cargo Van.
No drilling is required. The hitch uses existing vehicle fasteners and mounting points.
You need a 3/8" drive ratchet, 18mm and 15mm sockets, 13mm socket, torque wrench, screwdriver or punch, and utility knife. No power tools required.
Torque all 10mm fasteners to 48 lb-ft and all 12mm fasteners to 83 lb-ft.
The hitch has a gross load capacity of 3,500 lbs trailer weight and 350 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Yes, you must remove the exhaust and muffler hanger bolts to allow the exhaust to drop down during installation, then reinstall them after the hitch is mounted.
All non-trailer loads must be supported by Curt 18050 Stabilizing Straps. Failure to use them voids the warranty.
On Sale Today
Original price was $428.95. Current price is $288.99.You save $139.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$437.56$577.52
No reviews have been added for this product.