Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 7.5 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 5
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Camry (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2002 - 2006 | Toyota Camry | Installation Time: 30-60 minutes |
Yes, the CURT 55308 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55308) is designed to fit the 2002-2006 Toyota Camry.
The CURT 55308 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55308) fits 2002-2006 Toyota Camry models. The 2006 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 55308 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55308) fits the following vehicles: 2002-2006 Toyota Camry. Always verify your specific year, make, and model before ordering.
The CURT 55308 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55308) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part 55308 is designed for Toyota Camry. The manual does not specify which model years are supported, so contact Curt Manufacturing or your retailer to confirm your specific year and generation are compatible.
The kit includes two T-connectors (one with a yellow wire and one with a green wire), a black converter box, a white wire with eyelet and screw for grounding, double-sided tape, cable ties, and a 4-flat wire for trailer connection. The 4-flat wire is routed through the trunk and stored when not in use.
You will need a Phillips head screwdriver to remove the trunk trim panels. If no suitable grounding point with an existing screw and nut is available on the vehicle frame, you will also need a drill with a 3/32" bit to create a grounding hole. The kit provides the eyelet, screw, and cable ties.
Open the trunk. On both the driver and passenger sides, remove the Phillips head screws holding the plastic trim panels in place. Remove the trim panels and pull back the trunk lining to reveal the connectors.
Start on the driver's side and insert the T-connector containing the yellow wire into the vehicle's connector. Ensure the connectors are fully inserted with locking tabs in place. Then remove the rear threshold inside the trunk and route the wire to the passenger side. Repeat the process using the T-connector containing the green wire.
When disconnecting the vehicle's connectors, be careful not to damage the locking tabs. When inserting the T-connectors, ensure that the connectors are fully inserted with locking tabs in place. The locking tabs secure the connection and must be engaged properly.
Drilling is required only if no suitable grounding point with an existing screw and nut is available on the vehicle frame near the connector. If drilling is necessary, drill a 3/32" hole and secure the white wire using the eyelet and screw provided in the kit.
Drill a 3/32" hole for the grounding screw. The eyelet and screw are provided in the kit.
Adhere the black converter box to the frame of the car using the double-sided tape provided in the kit. Secure any loose parts of the T-connector with the cable ties provided.
When reassembling the trim panels, place the green wire under the vehicle threshold inside the trunk.
Route the 4-flat wire to the center of the vehicle and out the trunk when in use. When not in use, roll up the wire and store it in an out-of-the-way location in the trunk.
Before beginning installation, verify that miscellaneous items that may be hidden behind or under any surface in the trunk are identified to avoid damage to the vehicle and/or personal injury. Be careful not to damage connector locking tabs when disconnecting the vehicle's connectors.
Part 55308 is designed for Toyota Camry, but confirm your specific model year with Curt or your retailer.
You need a Phillips head screwdriver. If no existing grounding screw is available, you'll also need a drill with a 3/32" bit. The kit provides the eyelet, screw, and cable ties.
Drilling is required only if no existing screw with nut is available on the vehicle frame for grounding. If needed, drill a 3/32" hole.
The kit includes two T-connectors (yellow and green wires), a black converter box, white grounding wire with eyelet and screw, double-sided tape, cable ties, and a 4-flat trailer wire.
Verify that miscellaneous items hidden behind or under trunk surfaces are identified to avoid damage to the vehicle and personal injury. Be careful not to damage connector locking tabs.
On Sale Today
Original price was $69.95. Current price is $66.99.You save $2.96
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Sat, Sep 12 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$142.94$145.90
No reviews have been added for this product.