Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
On Sale Today
Original price was $69.95. Current price is $66.99.You save $2.96
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sat, Sep 12 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 7.5 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Novice
Installation Time Exact (Minutes): 5
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Camry (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1997 - 2001 | Toyota Camry | Installation Time: 30-60 minutes |
The CURT 55358 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55358) fits the following vehicles: 1997-2001 Toyota Camry. Always verify your specific year, make, and model before ordering.
Yes, the CURT 55358 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55358) is designed to fit the 1997-2001 Toyota Camry.
The CURT 55358 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55358) fits 1997-2001 Toyota Camry models. The 2001 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 55358 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Camry (Part #BKDK55358) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part 55358 is designed for Toyota Camry. The manual does not specify which model years are compatible, so contact Curt or your retailer to confirm your specific year and trim level.
Yes. You must remove the rear trunk fascia inside the trunk to route the wire from the driver's side to the passenger side of the vehicle during installation.
Remove each of the plastic trim panels inside the vehicle's trunk to locate the vehicle wiring and connection points that match the ends of the T-connector. The manual does not specify which panels or provide a diagram, so inspect your trunk carefully to identify all trim panels blocking access to the wiring.
1. Begin with the driver's side and separate the vehicle's wiring connectors carefully without breaking the locking tabs. 2. Attach each end to the T-connector containing the yellow wire, ensuring connectors are fully inserted with locking tabs in place. 3. Remove the rear trunk fascia and route the wire to the passenger side. 4. Repeat the connection process using the T-connector containing the green wire.
Separate the vehicle's wiring connectors carefully, being careful not to break the locking tabs. Attach each end to the appropriate T-connector (yellow wire for driver's side, green wire for passenger side). Ensure that the connectors are fully inserted with locking tabs in place.
Yes. You must drill a 3/32" hole to secure the white wire using the eyelet and screw provided. Before drilling, verify that no miscellaneous items are hidden behind or under any surface to avoid damage to the vehicle and/or personal injury.
Drill a 3/32" hole at a suitable grounding point near the adapter to secure the white wire using the eyelet and screw provided.
The 55358 includes an eyelet, screw, cable ties, and double-sided tape. The eyelet and screw are used to secure the white grounding wire. The cable ties and double-sided tape are used to secure loose wires and the black converter box to the vehicle.
You will need a drill capable of drilling a 3/32" hole. The manual does not specify other tools required, such as a screwdriver, wire strippers, or trim removal tools, so consult the manufacturer or your installer if you are unsure.
Secure any loose wires and the black converter box to the vehicle using the cable ties and double-sided tape provided with the kit.
Yes. After securing the loose wires and converter box, reattach all trim panels that were removed to access the vehicle wiring.
Before drilling, verify that no miscellaneous items are hidden behind or under any surface. Drilling without checking can cause damage to the vehicle and/or personal injury.
The T-connector has a yellow wire for the driver's side connection and a green wire for the passenger side connection. The manual does not specify what these wires control or their electrical function.
Yes, the 55358 is designed for Toyota Camry. Confirm your specific model year with Curt or your retailer.
Yes. You must drill a 3/32" hole for the grounding wire. Before drilling, verify no hidden items are behind or under surfaces to avoid vehicle damage or injury.
The kit includes an eyelet, screw, cable ties, and double-sided tape for securing the grounding wire, loose wires, and converter box.
Total for 4 items:
$142.94$145.90
No reviews have been added for this product.