Our in-house experts typically reply within one business day.
CURT
On Sale Today
Original price was $110.95. Current price is $93.99.You save $16.96 (15%)
Free Shipping
Ships free on all orders
Authorized Dealer
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Fri, Sep 18 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$169.94$186.90
Vehicle battery connection required
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 6.0 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Professional
Installation Time Exact (Minutes): 45
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Subaru Impreza hatchback (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Yes, the CURT 56111 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza Hatchback (Part #BKDK56111) is designed to fit the 2008-2011 Subaru Impreza.
The CURT 56111 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza Hatchback (Part #BKDK56111) fits 2008-2011 Subaru Impreza models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 56111 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza Hatchback (Part #BKDK56111) fits the following vehicles: 2008-2011 Subaru Impreza. Always verify your specific year, make, and model before ordering.
The CURT 56111 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza Hatchback (Part #BKDK56111) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part 56111 is designed for the Subaru Impreza 5-door wagon, including Outback Sport models. The T-connector harness is installed by connecting to the vehicle's existing taillight wiring harness connectors behind the taillights.
Yes. You must remove both taillights by removing two screws holding each one in place and pulling them out. This gives you access to the vehicle's taillight wiring harness connectors behind the taillights, where the T-connector ends are inserted.
Separate the vehicle's taillight wiring harness connectors behind each taillight, being careful not to damage the locking tabs. Insert the T-connector end with the yellow wire between the separated connectors on the driver side, ensuring the connectors are fully inserted with locking tabs in place. Repeat on the passenger side using the T-connector end with the green wire. Route the green wire across the back of the bumper to the passenger side, avoiding areas that may cut or melt the wire, such as the muffler or exhaust pipe.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle's frame. If no suitable point exists, drill a 3/32" hole and secure the white ground wire using the ring terminal and screw provided with the kit.
Drilling may be required. If a suitable existing grounding point (such as a screw with nut in the vehicle's frame) is not available near the connector, you will need to drill a 3/32" hole to secure the white ground wire. Before drilling, verify that miscellaneous items hidden behind or under any surface will not be damaged.
Drill a 3/32" hole to secure the white ground wire using the ring terminal and screw provided.
Before drilling, verify that miscellaneous items hidden behind or under any surface will not be damaged. This prevents damage to hidden components and personal injury.
Adhere the black converter box to the frame of the car using the double-sided tape provided with the kit.
The kit includes a T-connector harness with yellow and green wire ends, a white ground wire with ring terminal, a screw for grounding, a black converter box, double-sided tape, cable ties, and a 4-flat wire. You will also need to review the CME-PCL-INS instruction sheet for power wire routing from the battery.
Route the 4-flat wire to the center of the vehicle and secure it in a convenient out-of-the-way location.
Secure any loose parts of the T-connector with the cable ties provided in the kit.
The CME-PCL-INS instruction sheet provides instructions for routing the black power wire from the battery to the converter box. You must review this sheet as part of the 56111 installation process.
When separating the vehicle's taillight wiring harness connectors, be sure not to damage the locking tabs. The T-connector ends will insert between the separated connectors, and the locking tabs must be in place to ensure the connectors are fully inserted.
When routing the T-connector end with the green wire across the back of the bumper to the passenger side, avoid any areas that may cut or melt the wire, such as the muffler or exhaust pipe.
The 56111 is designed for Subaru Impreza 5-door wagon models, including Outback Sport.
Yes, you must remove both taillights by removing two screws on each side to access the taillight wiring harness connectors.
Drilling may be required if no existing grounding point is available on the vehicle's frame. If needed, you drill a 3/32" hole for the ground wire.
The manual does not specify the tools required. Contact Curt technical support at 1-877-287-8634 for a complete tool list.
The kit includes a T-connector harness, white ground wire with ring terminal and screw, black converter box, double-sided tape, cable ties, and a 4-flat wire. The CME-PCL-INS instruction sheet for power wire routing is also required.
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2008 - 2011 | Subaru Impreza | Hatchback | Installation Time: 30-60 minutes |
No reviews have been added for this product.
