Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2023 Subaru Impreza
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 6.0 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Professional
Installation Time Exact (Minutes): 45
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Subaru Impreza, Subaru BRZ and Scion FRS (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94943 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2013 - 2016 | Scion FR-S | — | Installation Time: 30-60 minutes |
| 2013 - 2020 | Subaru BRZ | — | Installation Time: 30-60 minutes |
| 2017 - 2023 | Subaru Impreza | Sedan · 4-Door | Installation Time: 30-60 minutes Exclude WRX |
The CURT 56212 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza, BRZ, Scion FR-S (Part #BKDK56212) fits the following vehicles: 2013-2016 Scion FR-S; 2013-2020 Subaru BRZ; 2017-2023 Subaru Impreza. Always verify your specific year, make, and model before ordering.
Yes, the CURT 56212 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza, BRZ, Scion FR-S (Part #BKDK56212) is designed to fit the 2013-2016 Scion FR-S.
The CURT 56212 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza, BRZ, Scion FR-S (Part #BKDK56212) fits 2013-2016 Scion FR-S models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 56212 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Impreza, BRZ, Scion FR-S (Part #BKDK56212) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part 56212 is designed for the Subaru BRZ. It is also compatible with the Scion FR-S.
Yes, Curt part 56212 is designed for the Scion FR-S. It is also compatible with the Subaru BRZ.
Curt part 56212 is a 4-flat OEM type replacement connector with an install kit for Subaru BRZ and Scion FR-S vehicles. It includes a T-Connector harness, converter box, wiring, and hardware for connecting a trailer to your vehicle's electrical system.
Yes, you must disconnect the negative battery terminal before beginning installation. The battery is located on the passenger's side under the hood. Reconnect it only after all other installation steps are complete.
You must remove: all trunk floor coverings, three plastic push fasteners and the rear scuff panel, and three plastic push fasteners on each side of the trunk that hold the felt trunk liner in place. These removals provide access to the taillight wiring harness connectors.
The vehicle's wiring harness connectors are located in the trunk behind the taillight in positions P3 and P4, as shown in the Wiring Location Guide included with the kit. You will access them after removing the trunk floor coverings, scuff panel, and felt trunk liner.
Separate the vehicle's taillight wiring harness connectors by carefully pulling them apart, taking care not to damage the locking tabs. Insert the T-Connector end with the green wire between the separated connectors on the passenger's side, ensuring the connectors are fully inserted with locking tabs in place. Repeat this process on the driver's side using the T-Connector end with the yellow wire.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle's frame. The area must be free of rust, dirt, or paint. If no suitable point exists, drill a 3/32" pilot hole. Secure the white ground wire using the ring terminal and screw provided with the kit.
Drilling may be required. If a suitable existing grounding point (such as a screw with nut in the vehicle's frame) is not available, you must drill a 3/32" pilot hole for the provided grounding screw. Before drilling, verify that no miscellaneous items are hidden behind or under the surface to avoid damage and personal injury.
Drill a 3/32" pilot hole for the provided grounding screw. The grounding point should be located near the connector and must be free of rust, dirt, or paint.
Route the 4-flat wire to the center of the vehicle when in use. When not in use, roll it up and store it in a convenient, out-of-the-way location.
Locate a flat spot inside the vehicle and adhere the black converter box using the double-sided tape provided with the kit.
The T-Connector harness includes a green wire (passenger's side connection), a yellow wire (driver's side connection), a white ground wire, and a black power wire. The green and yellow wires connect to the taillight harness; the white wire grounds to the vehicle frame; and the black wire routes from the battery.
The battery connection must be fuse protected with a maximum of 10 amps. Exceeding this rating can cause loss of warranty, overheating, and potential fire. Do not exceed the tow vehicle's lamp load rating or the product rating, whichever is lower.
Signal circuits are limited to 3.0 amps per side, and tail/running circuits are limited to 6.0 amps total. Do not exceed the tow vehicle's lamp load rating or the product rating of 10 amps maximum fuse protection, whichever is lower. Check your vehicle owner's manual or contact the vehicle manufacturer for your specific lamp load rating.
Before drilling, verify that miscellaneous items are not hidden behind or under any surface. Drilling without checking can cause damage to hidden components and personal injury.
Use the provided cable ties to secure any loose wires during installation.
Curt 56212 fits Subaru BRZ and Scion FR-S models.
Yes, disconnect the negative battery terminal before starting installation. Reconnect it only after all installation steps are complete.
The battery connection must use a 10 amp maximum fuse. Exceeding this can cause loss of warranty, overheating, and potential fire.
Drilling may be required only if no suitable existing grounding point is available. If needed, drill a 3/32" pilot hole for the grounding screw.
Signal circuits: 3.0 amps per side. Tail/running circuits: 6.0 amps total. Do not exceed your vehicle's lamp load rating or the product's 10 amp fuse rating, whichever is lower.
On Sale Today
Original price was $100.95. Current price is $87.99.You save $12.96 (13%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sat, Aug 15 - Mon, Aug 17
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$163.94$176.90
No reviews have been added for this product.