Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
On Sale Today
Original price was $110.95. Current price is $91.95.You save $19.00 (17%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Vehicle battery connection required
Includes fuse holder, battery connection wiring and other necessary wiring components
Includes fuse holder, battery connection wiring and other necessary wiring components
Warranty: One-Year Limited Warranty
Electrical System Type: 2W
Output Type: 4-Way Flat
Tail Light Circuits: 6.0 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Professional
Installation Time Exact (Minutes): 45
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Jeep Compass (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94942 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2016 | Jeep Compass | Installation Time: 30-60 minutes |
| 2017 | Jeep Compass | Installation Time: 30-60 minutes Built in USA |
Yes, the CURT 56344 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Jeep Compass (Part #BKDK56344) is designed to fit the 2011-2017 Jeep Compass.
The CURT 56344 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Jeep Compass (Part #BKDK56344) fits the following vehicles: 2011-2017 Jeep Compass. Always verify your specific year, make, and model before ordering.
The CURT 56344 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Jeep Compass (Part #BKDK56344) fits 2011-2017 Jeep Compass models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 56344 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Jeep Compass (Part #BKDK56344) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, the 56344 custom wiring harness is designed for Jeep Compass vehicles in the SUVs, Mini & Full-Sized Vans category. The manual confirms this as the primary application.
The 56344 is a custom wiring harness that connects your vehicle's taillight wiring to a 4-flat connector, allowing you to tow a trailer. It includes a converter box that processes the vehicle's taillight signals for trailer use.
You will need a panel trim removal tool. The manual also indicates you may need a drill with a 3/32" bit if a suitable existing grounding point is not available near the taillight connector.
Yes, you must disconnect the negative battery terminal before beginning installation. This is the first step in the installation process and is required for safety.
Open the tailgate and remove the two plastic fasteners holding each taillight assembly in place. Carefully remove both taillights, taking care not to damage the alignment tabs. The manual provides four new fasteners for reinstalling the taillight assemblies after the harness is connected.
Locate the vehicle's taillight wiring harness connectors. Partially slide out the red lock on the top of each connector. Separate the connectors from the taillight housing, being careful not to damage the locking tabs. Insert the custom wiring harness end (yellow wire for driver side, green wire for passenger side) between the separated connectors, ensuring they are fully inserted with locking tabs in place.
Locate a suitable grounding point near the taillight connector, such as an existing screw with nut in the vehicle frame. If no suitable point exists, drill a 3/32" pilot hole. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw.
Drilling may be required if a suitable existing grounding point is not available near the taillight connector. If drilling is necessary, you will drill a 3/32" pilot hole for the provided grounding screw. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Route the harness end with the green wire down through the opening under the driver side taillight, over to the passenger side along the backside of the bumper, and up through the opening under the passenger side taillight. The black converter box should be adhered to a flat spot inside the vehicle near the taillight using the provided double-sided tape. The black power wire from the battery should be routed as shown on the included CME-PCL-INS sheet.
Mount the black converter box on a flat spot inside the vehicle near the taillight. Use the provided double-sided tape to adhere it securely.
When not in use, roll up the 4-flat connector and store it in a convenient, out-of-the-way location. When in use, route it to the center of the vehicle. Secure any loose wires with the provided cable ties.
The 56344 has the following circuit ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 6.0 amps total. Do not exceed these ratings or the tow vehicle lamp load rating, whichever is lower.
The battery connection must be fuse protected with a maximum of 10 amps. Exceeding this rating can cause loss of warranty, overheating and potential fire.
After installation is complete, test the wiring harness for proper function by using a test light or by connecting a properly wired trailer. All steps must be followed to ensure the harness functions properly.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire. The battery connection must be fuse protected with a maximum of 10 amps.
Reinstall all items removed during installation, including the taillight assemblies using the four new fasteners provided. Reconnect the negative battery terminal. Install the provided 4-flat dust cover to help prevent corrosion.
Yes, the Curt 56344 is designed for Jeep Compass vehicles.
You need a panel trim removal tool. A drill with 3/32" bit may be needed if you must create a grounding hole.
Yes, disconnect the negative battery terminal before starting installation.
Drilling may be required only if no suitable existing grounding point is available; you would drill a 3/32" pilot hole for the ground screw.
The battery connection must be fuse protected with a maximum of 10 amps.
Test for proper function using a test light or by connecting a properly wired trailer.
Total for 4 items:
$167.90$186.90
No reviews have been added for this product.