Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Vehicle battery connection required
Includes fuse holder and other necessary wiring components
Includes fuse holder and other necessary wiring components
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 6.0 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 20
CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Honda Odyssey (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 - 2026 | Honda Odyssey | Installation Time: 30-60 minutes |
Yes, the CURT 56382 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Honda Odyssey (Part #BKDK56382) is designed to fit the 2018-2026 Honda Odyssey.
The CURT 56382 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Honda Odyssey (Part #BKDK56382) fits 2018-2026 Honda Odyssey models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 56382 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Honda Odyssey (Part #BKDK56382) fits the following vehicles: 2018-2026 Honda Odyssey. Always verify your specific year, make, and model before ordering.
The CURT 56382 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Honda Odyssey (Part #BKDK56382) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, the Curt 56382 is designed for Honda Odyssey vans in the SUVs, Mini & Full-Sized Vans category. Your vehicle must have a factory trailer tow plug located behind the driver side rear fuse panel cover to use this connector.
The Curt 56382 is a custom wiring connector that interfaces with your vehicle's factory trailer tow plug. It includes a converter box, 4-flat connector, fuses, and grounding hardware. The connector allows you to connect a trailer with proper signal and running light circuits.
You will need a flat blade screwdriver, a panel trim removal tool, and a cutting tool. The manual also recommends having a test light or properly wired trailer available to test the connector after installation.
The kit includes a black converter box, a 4-flat connector with dust cover, double-sided tape, a 10-amp fuse for the in-line fuse holder, a 30-amp cartridge fuse, two 7.5-amp mini blade fuses, a white ground wire with ring terminal, a mounting screw for grounding, and cable ties for securing loose wires.
The manual does not specify whether the battery must be disconnected. Contact Curt Manufacturing or your vehicle manufacturer for guidance on this safety step before beginning installation.
The factory trailer tow plug is located behind the driver side rear fuse panel cover, near the rear seat. The manual refers to this location as position S3. You will remove the fuse panel cover to access it.
Insert the custom wiring harness connector into the vehicle factory tow plug connector. Make sure the connectors are fully inserted with locking tabs in place. The connectors should fit together similar to how the factory tow plug is designed.
Mount the black converter box to the metal mounting bracket located to the left of the fuse box using the provided double-sided tape. Choose a flat spot inside the vehicle near the fuse panel. The converter box should be positioned so the in-line fuse holder is accessible.
Insert the provided 10-amp fuse into the in-line fuse holder on the converter box. Then, in the rear fuse panel, install the provided 30-amp cartridge fuse in position #12 and two 7.5-amp mini blade fuses in positions #10 and #11.
You may need to drill a grounding point if a suitable existing screw with nut is not available in the vehicle frame near the connector. If drilling is required, use a 3/32" pilot hole. The area must be free of rust, dirt and paint before securing the white ground wire. Always check for hidden items behind or under surfaces before drilling to avoid damage and personal injury.
Signal Circuits are rated at 3.0 amps per side. Tail/Running Circuits are rated at 6.0 amps total. The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower, as exceeding the rating can cause loss of warranty, overheating and potential fire.
Route the 4-flat behind the side trim panel and out from underneath the vehicle. When in use, route the 4-flat to the center of the vehicle and out the trunk. When not in use, roll it up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring connector will function properly before testing.
Install the provided 4-flat dust cover to help prevent corrosion when the connector is not in use.
You must remove the rear scuff panel (secured by two cargo hooks), the driver side trim panel (secured by one cargo hook), and the fuse panel cover near the rear seat on the driver side. Take care not to damage the alignment tabs when removing these panels.
Yes, the Curt 56382 is designed for Honda Odyssey vans. Your vehicle must have a factory trailer tow plug behind the driver side rear fuse panel.
Drilling may be required only if a suitable existing screw with nut is not available for the ground wire. If drilling is needed, use a 3/32" pilot hole. Always check for hidden items before drilling.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed this rating or the tow vehicle lamp load rating, whichever is lower, as it can cause overheating and potential fire.
Install a 30-amp cartridge fuse in position #12 and two 7.5-amp mini blade fuses in positions #10 and #11 in the rear fuse panel. A 10-amp fuse goes in the in-line fuse holder on the converter box.
On Sale Today
Original price was $72.95. Current price is $59.99.You save $12.96 (18%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$135.94$148.90
No reviews have been added for this product.