Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Vehicle battery connection required
Includes fuse holder, battery connection wiring and other necessary wiring components
Includes fuse holder, battery connection wiring and other necessary wiring components
Warranty: One-Year Limited Warranty
Finish: BLACK RUBBER
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 6.0 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Time Exact (Minutes): 0
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Venza (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2021 - 2024 | Toyota Venza | Installation Time - |
The CURT 56460 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Venza (Part #BKDK56460) fits 2021-2024 Toyota Venza models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 56460 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Venza (Part #BKDK56460) is designed to fit the 2021-2024 Toyota Venza.
The CURT 56460 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Venza (Part #BKDK56460) fits the following vehicles: 2021-2024 Toyota Venza. Always verify your specific year, make, and model before ordering.
The CURT 56460 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Toyota Venza (Part #BKDK56460) Typical installation time is . Basic hand tools are typically all you need.
The Curt 56460 is designed for SUVs and vans (designated as type S). The manual does not list specific vehicle makes, models, or years. Contact Curt Manufacturing or consult a fitment database with your vehicle's year, make, and model to confirm compatibility before purchasing.
The Curt 56460 is a powered converter lead system that converts vehicle taillight and turn signal wiring to a 4-flat trailer connector. It includes a converter box that processes the vehicle's lighting signals and provides power to trailer lights. The system is designed for 12-volt negative ground vehicles only.
You will need: panel trim removal tool, wire crimper, small flathead screwdriver, wire stripper, and utility knife. These are listed as required tools in the manual. Proper tools will improve installation quality and reduce installation time.
The kit includes: a custom wiring harness with connectors, a black converter box, double-sided tape for mounting the converter, sealant for sealing grommet cuts, cable ties for securing wires, a 4-flat dust cover, a fuse holder with 10-amp fuse, a white ground wire with ring terminal, and a screw for the ground connection. A ring terminal is used for the battery connection.
Yes. The manual requires you to disconnect the negative battery terminal before beginning installation. Fasten this wire down and away from the battery while completing the installation process. The negative battery cable must remain disconnected until after all other wiring steps are complete and the fuse is installed.
The black converter box mounts on a flat spot on the sidewall near the floor, using the provided double-sided tape. The exact location may vary depending on your vehicle's interior layout. Choose a location that is accessible and away from high-traffic areas.
On the driver side, locate the vehicle taillight wiring harness connectors. Separate the connectors from the taillight housing, taking care not to damage the locking tabs. Insert the custom wiring harness end with red and brown wires between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place.
On the driver side, locate the turn signal housings under the rear of the vehicle. Separate the connectors from the turn signal housing, taking care not to damage the locking tabs. Insert the custom wiring harness end with green and yellow wires between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place.
Yes. You must remove the grommet behind the taillight where the vehicle's taillight wiring passes from inside the cabin to the taillight. Cut a slit large enough to route the new custom wiring end through. After routing the wires, reseat the grommet and use the provided sealant to seal the cut in the grommet and around all wires.
You may need to drill a 3/32" hole if a suitable existing hole is not available. The white ground wire ring terminal attaches to the vehicle body using the screw provided. Drill only if necessary.
The wiring harness uses the following colors: Green for right turn signal, Red for brake, Yellow for left turn signal, and Brown for taillight. The converter also has a black power wire that connects to the vehicle battery positive terminal and a white ground wire that connects to the vehicle body.
The battery connection must be fuse-protected with a 10-amp maximum fuse. The kit includes a fuse holder with a 10-amp fuse. Install the fuse after all other steps are complete. Exceeding this rating can cause loss of warranty, overheating, and potential fire.
Signal circuits are rated at 3.0 amps per side. Tail and running circuits are rated at 6.0 amps total. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating, and potential fire.
The power wire must be 12 GA (12 gauge) or larger. Route the 12 GA wire to the vehicle battery location, taking care to avoid any pinch points and hot or rotating components.
Route the black power wire from the vehicle battery under the passenger-side sidewall panel, under the vehicle skid plate, and under the driver-side sidewall panel. Secure any loose wires with the provided cable ties. When passing the power wire through sheet metal, use an existing grommet, add a grommet, or use silicone to protect the wire from sharp edges.
A ring terminal is used for the battery connection. The ring terminal of the black power wire attaches to the positive battery terminal. The white ground wire ring terminal attaches to the vehicle body using the screw provided.
The converter system is designed for use only on 12-volt negative ground electrical systems. It is not compatible with positive ground systems or other voltage configurations.
When not in use, roll up the 4-flat connector and store it in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties. Install the provided 4-flat dust cover to help prevent corrosion.
After connecting the 12-volt power wire to the harness, verify that the harness is functioning by attaching the battery and testing with a test light, 4-flat tester, or a functioning trailer. Once installed, test for proper function before using the system with a trailer.
Periodic inspection of all wires and connections should be performed to ensure there is no visible damage or loose connections. Check the 4-flat connector and dust cover regularly to prevent corrosion.
The Curt 56460 is designed for SUVs and vans. Verify compatibility with your specific vehicle year, make, and model using a fitment database or by contacting Curt Manufacturing before purchasing.
Drilling may be required: a 3/32" hole for the ground wire connection if no existing hole is available, and you must cut a slit in the grommet behind the taillight to route wires through.
The power wire must be 12 GA (12 gauge) or larger.
The system is designed for 12-volt negative ground electrical systems only.
Total for 4 items:
$183.94$208.90
On Sale Today
Original price was $132.95. Current price is $107.99.You save $24.96 (19%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.