Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2006 - 2010 Jeep Commander
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 7.5 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Novice
Installation Time Exact (Minutes): 15
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Jeep Commander (except Rocky Mountain Edition) (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2010 | Jeep Commander | Installation Time: 30-60 minutes Excluding Rocky Mountain Edition |
Yes, the CURT Custom Wiring, 4-Way Flat, Select Jeep Commander, Except Rocky Mountain Edition Trailer Connector Kit (Part #BKDK55414) is designed to fit the 2006-2010 Jeep Commander.
The CURT Custom Wiring, 4-Way Flat, Select Jeep Commander, Except Rocky Mountain Edition Trailer Connector Kit (Part #BKDK55414) fits 2006-2010 Jeep Commander models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Custom Wiring, 4-Way Flat, Select Jeep Commander, Except Rocky Mountain Edition Trailer Connector Kit (Part #BKDK55414) fits the following vehicles: 2006-2010 Jeep Commander. Always verify your specific year, make, and model before ordering.
The CURT Custom Wiring, 4-Way Flat, Select Jeep Commander, Except Rocky Mountain Edition Trailer Connector Kit (Part #BKDK55414) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part number 55414 is designed for the Jeep Commander. The manual confirms this application.
The Curt 55414 is a T-connector wiring harness for the Jeep Commander. It includes a black converter box, wiring with yellow, green, and white leads, a 4-flat wire connector, cable ties, an eyelet, and a screw for grounding.
The kit includes: a black converter box, wiring harness with yellow, green, and white wires, a 4-flat wire connector, cable ties, double-sided tape, an eyelet, and a screw for grounding.
No, you do not need to remove the tailgate. You only need to open it to access the taillight assemblies on both sides of the vehicle.
Open the tailgate. On each side, remove the two plastic fasteners on the taillight assembly and pull out on the taillight. Repeat on both the driver's side and passenger side.
The harness includes three wire colours: yellow (plugged between mating connectors on the driver's side), green (routed along the back of the bumper from driver's side to passenger side), and white (used for grounding to the vehicle frame).
The yellow wire is plugged in between the mating connectors on the driver's side of the vehicle.
Route the green wire down through the opening on the driver's side, then along the back side of the bumper to the passenger side, then up through the opening on the passenger side and plug it in between the mating connectors.
Route the 4-flat wire from the driver's side of the vehicle to the center of the vehicle and secure it with a cable tie in a convenient location.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle's frame. If no suitable point exists, drill a 3/32" hole and secure the white wire using the eyelet and screw provided in the kit.
Drilling is not always required. You only need to drill a 3/32" hole if a suitable existing grounding point (such as a screw with nut in the vehicle's frame) is not available near the connector.
If drilling is necessary, drill a 3/32" hole for the white grounding wire.
Adhere the black converter box to the frame of the vehicle using the double-sided tape provided in the kit.
Secure any loose parts of the T-connector with the cable ties provided in the kit.
Before drilling, verify that miscellaneous items (such as wiring, fuel lines, or other components) that may be hidden behind or under any surface are not in the way. This will avoid damage to the vehicle and personal injury.
Yes, the Curt 55414 is designed for the Jeep Commander.
Only if no suitable existing grounding point is available. If required, drill a 3/32" hole for the white grounding wire.
On Sale Today
Original price was $104.95. Current price is $79.99.You save $24.96 (24%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$155.94$180.90
No reviews have been added for this product.