Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Vehicle battery connection required
Includes fuse holder, battery connection wiring and other necessary wiring components
Includes fuse holder, battery connection wiring and other necessary wiring components
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 7.5 Amps
Turn and Brake Circuits: 5.0 Amps
Installation Difficulty: Professional
Installation Time Exact (Minutes): 45
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Kia K5 (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2021 - 2024 | Kia K5 | Installation Time - |
The CURT Custom Wiring Harness, 4-Way Flat Output, Select Kia K5 Trailer Connector Kit (Part #BKDK56469) fits the following vehicles: 2021-2024 Kia K5. Always verify your specific year, make, and model before ordering.
The CURT Custom Wiring Harness, 4-Way Flat Output, Select Kia K5 Trailer Connector Kit (Part #BKDK56469) fits 2021-2024 Kia K5 models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT Custom Wiring Harness, 4-Way Flat Output, Select Kia K5 Trailer Connector Kit (Part #BKDK56469) is designed to fit the 2021-2024 Kia K5.
The CURT Custom Wiring Harness, 4-Way Flat Output, Select Kia K5 Trailer Connector Kit (Part #BKDK56469) Typical installation time is . Basic hand tools are typically all you need.
The Curt 56469 is a powered converter lead designed to convert a vehicle's taillight signals into a 4-flat trailer connector. It allows you to connect a trailer to a passenger car by tapping into the existing taillight wiring and providing a powered 4-flat connector for the trailer. The converter includes a black converter box that mounts inside the trunk and routes wiring to both taillights.
The Curt 56469 is designed for passenger cars with 12-volt negative ground electrical systems. The manual does not specify which vehicle models or years are compatible. Contact Curt Manufacturing or consult a fitment database with your vehicle's year, make and model to confirm compatibility before purchasing.
Yes. The converter system is designed to be used only on 12-volt negative ground systems. If your vehicle has a positive ground system, this product is not compatible.
You will need: flathead screwdriver, cutting tool, panel trim removal tool, wire crimper, electrical tape, and wire stripper. A 3/32" drill bit may also be required if you need to drill a pilot hole for the ground wire fastening.
The kit includes: a black converter box, double-sided tape for mounting, a white ground wire with ring terminal, a black power wire, a green wire, a yellow wire, cable ties, a 4-flat dust cover, a ground screw, and a fuse holder with 15-amp fuse. The fuse should be installed only after all other installation steps are complete.
Yes. You must disconnect the negative battery terminal before beginning installation. Fasten this wire down and away from the battery while completing the installation process. Reconnect the negative battery terminal only after all other steps are complete and you have tested the harness with a test light, 4-flat tester, or functioning trailer.
Open the trunk and remove the floor covering to expose the spare tire. Using a large flathead screwdriver, remove the two fasteners in the threshold (one on each side). Using a panel trim removal tool, loosen the push fasteners in the trunk threshold, then lift and slide off the threaded bolt. This provides access to the taillight connectors and space for the converter box.
Pull back the sidewall panels inside the trunk. Using a panel trim removal tool, loosen the push fasteners in the side wall (two per side) and pull back the felt liner to expose the taillight electrical harness. Repeat on the passenger side as needed.
Locate a flat spot on the driver side of the vehicle behind the felt trunk liner. Adhere the black converter box using the provided double-sided tape. Ensure the surface is clean and dry before applying the tape.
Starting on the driver side, pull back the sidewall panels and locate the taillight housing. Separate the connectors carefully, taking care not to damage the locking tabs. Install the custom wiring harness end with the yellow wire positioned between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place.
Route the green wire along the back of the trunk below the threshold to the passenger side of the vehicle. Zip tie in place as needed. Locate the taillight housing and separate the connectors, taking care not to damage the locking tabs. Install the housing with the green wire positioned between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place.
Not necessarily. Locate a grounding point such as an existing screw or bolt in the frame of the vehicle. If no suitable existing fastener is available, you may drill a 3/32" pilot hole. Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury. The area should be free from rust, dirt, and paint—use an abrasive pad or paper to remove rust and paint if needed.
Drill a 3/32" pilot hole if an existing screw or bolt is not available for grounding. Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
The converter uses the following wire colors: Yellow = Left turn signal, Green = Right turn signal, Red = Brake signal, Brown = Taillight (running lights). The black power wire connects to the positive battery terminal, and the white ground wire connects to the vehicle frame or body.
Route the black 12-gauge power wire from the converter to the vehicle battery location, taking care to avoid any pinch points and hot or rotating components. Use the ring terminal provided to connect the black power wire to the positive (+) battery terminal. When passing the power wire through sheet metal, use an existing grommet, add a grommet, or use silicone to protect the wire from sharp edges. Secure the power wire to the vehicle chassis using the provided cable ties.
Attach the ring terminal of the white ground wire to the vehicle body using the provided screw. If no suitable existing fastener is available, drill a 3/32" pilot hole. The area should be free from rust, dirt, and paint—use an abrasive pad or paper to remove rust and paint before securing the ground wire.
The battery connection must be fuse-protected with a 15-amp maximum fuse. The kit includes a fuse holder with a 15-amp fuse. Install the fuse only after all other installation steps are complete. Exceeding the 15-amp rating can cause loss of warranty, overheating, and potential fire.
Signal circuits (left and right turn): 5.0 amps per side. Tail/Running circuits: 7.5 amps total. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating, and potential fire.
Disconnect the negative battery terminal before beginning installation and fasten it down and away from the battery. Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury. When routing the power wire, avoid pinch points and hot or rotating components. Use a ring terminal for the battery connection. Do not install the fuse until all other steps are complete. Wear appropriate protective equipment when using tools and handling electrical components.
When in use, route the 4-flat connector with the center of the vehicle and out of the hatch to the trailer. Be sure to stay clear of the hatch's latching mechanism. When not in use, roll up and store in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties.
Once the 12-volt power wire is connected to the harness, verify that the harness is functioning by attaching the battery and testing with a test light, 4-flat tester, or a functioning trailer. Do not reconnect the negative battery terminal until you have completed this test. After testing, reinstall all items removed during installation and reconnect the negative battery terminal if it was disconnected.
After testing the harness with a test light, 4-flat tester, or functioning trailer, reinstall all items removed during installation. Reconnect the negative battery terminal if it was disconnected at the beginning. Install the provided 4-flat dust cover to help prevent corrosion. Secure any loose wires with the provided cable ties.
Periodic inspection of all wires and connections should be performed to ensure there is no visible damage or loose connections. Check the 4-flat connector and dust cover regularly, especially if the trailer is used frequently. Keep the connector clean and store it in a convenient, out-of-the-way location when not in use.
The Curt 56469 is designed for passenger cars with 12-volt negative ground electrical systems. Confirm your vehicle's compatibility with Curt Manufacturing or a fitment database before purchasing.
Yes. Disconnect the negative battery terminal before installation and reconnect it only after testing the harness with a test light, 4-flat tester, or functioning trailer.
Drilling is not required if an existing screw or bolt is available for the ground wire fastening. If not, drill a 3/32" pilot hole. Always check for hidden items before drilling.
Yellow = Left turn, Green = Right turn, Red = Brake, Brown = Taillight. Black power wire connects to positive battery; white ground wire connects to vehicle frame.
Periodically inspect all wires and connections for visible damage or loose connections. Keep the 4-flat connector clean and store it in a convenient location when not in use.
On Sale Today
Original price was $126.95. Current price is $104.99.You save $21.96 (17%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$180.94$202.90
No reviews have been added for this product.