Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2002 - 2007 Buick Rendezvous
Confirmed to Fit
2001 - 2005 Pontiac Aztek
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 3 receiver hitch is rated for up to 3,500 lbs. gross trailer weight (GTW) and up to 350 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75430 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 33 LBS |
| GROSS TOWING WEIGHT: | 3,500 LBS. |
| GROSS TONGUE WEIGHT: | 350 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | YES |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | VISIBLE |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Draw•Tite® and the Checkered Flag Foundation
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2002 - 2007 | Buick Rendezvous | Class 3 Trailer Hitch: 3500 lbs 350/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Drilling Required Install Time is 40 minutes |
| 2001 - 2005 | Pontiac Aztek | Class 3 Trailer Hitch: 3500 lbs 350/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Drilling Required Install Time is 40 minutes |
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Rendezvous, Pontiac Aztek 75430 (Part #DT75430) fits the following vehicles: 2002-2007 Buick Rendezvous; 2001-2005 Pontiac Aztek. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Rendezvous, Pontiac Aztek 75430 (Part #DT75430) is designed to fit the 2002-2007 Buick Rendezvous.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Rendezvous, Pontiac Aztek 75430 (Part #DT75430) fits 2002-2007 Buick Rendezvous models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Rendezvous, Pontiac Aztek 75430 (Part #DT75430) Drilling is required for installation. Basic hand tools are typically all you need.
Yes, part number 75430 is designed to fit all Pontiac Aztek and all Buick Rendezvous models. The hitch is a Class II receiver hitch with a maximum gross trailer weight rating of 3500 lb and maximum tongue weight of 350 lb, provided your vehicle's manufacturer rating is not lower.
You will need wrenches in sizes 9/16 inch, 11/16 inch, and 3/4 inch, a 3/8 inch drill bit, and a torque wrench. A torque wrench is essential because fasteners must be tightened to specific torque values: ½-13 fasteners to 75 lb-ft and 3/8-16 fasteners to 30 lb-ft.
Lowering the exhaust may ease installation but is not always required. To lower the exhaust, remove the rubber hanger from the hanger bracket. After hitch installation, raise the exhaust back into position. If additional exhaust clearance is needed after installation, the exhaust hanger bracket (which is welded to the vehicle frame) can be bent downward.
Yes, drilling is required. Using a 3/8 inch drill bit, you must drill through the holes in the hitch end plate into the lip of the vehicle end panel at four locations (two places each side). Do not use a torch to cut these holes.
1. Install blocks and ½-13 carriage bolts through the rearmost slot in the vehicle frame rail and down through the forward slot in the frame, each side. 2. Install blocks and ½-13 carriage bolts up through the rearmost slot and back down through the same rearmost slot, each side. Ensure blocks do not overlap inside the frame. 3. Raise the hitch onto the carriage bolts, ensuring the rear face of the hitch end plate contacts the lip of the vehicle end panel. Install conical toothed washers and nuts, finger tight. 4. Drill four holes (two each side) through the hitch end plate into the vehicle end panel lip using a 3/8 inch bit. 5. Install 3/8-16 hex bolts, flat washers, lock washers, and nuts; tighten to 30 lb-ft. 6. Raise the exhaust back into position if lowered.
All ½-13 fasteners must be tightened with a torque wrench to 75 lb-ft.
All 3/8-16 fasteners must be tightened with a torque wrench to 30 lb-ft.
The maximum gross trailer weight is 3500 lb and the maximum tongue weight is 350 lb. However, you must not exceed the lower of these ratings or your vehicle manufacturer's towing rating.
The hitch includes: four ½-13 carriage bolts (1-3/4 inch), four ¼ x 1 x 3 blocks, four 3/8-16 hex bolts (1-1/4 inch), four ½-13 conical toothed washers, four 3/8 flat washers, four 3/8 lock washers, four ½-13 nuts, and four 3/8-16 nuts. Fastener kits 75430F or 87004F are also available.
Observe safety precautions when working beneath the vehicle and wear eye protection. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. A damaged hitch or ball must be removed and replaced immediately.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. The manual recommends regular inspection to maintain safe operation.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened. The manual does not specify an exact interval but emphasizes regular inspection.
Yes, part 75430 fits all Pontiac Aztek and Buick Rendezvous models. Maximum towing capacity is 3500 lb gross trailer weight and 350 lb tongue weight, or your vehicle manufacturer's rating, whichever is lower.
You need wrenches (9/16, 11/16, 3/4 inch), a 3/8 inch drill bit, and a torque wrench. Lowering the exhaust may ease installation but is optional.
Tighten all ½-13 fasteners to 75 lb-ft and all 3/8-16 fasteners to 30 lb-ft using a torque wrench.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $313.75. Current price is $230.53.You save $83.22 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Jennifer
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
