Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2020 Buick Envision
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 3 receiver hitch is rated for up to 4,500 lbs. gross trailer weight (GTW) and up to 675 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 76300 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 23.4 LBS |
| GROSS TOWING WEIGHT: | 4,500 LBS. |
| GROSS TONGUE WEIGHT: | 675 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Draw-Tite® Trailer Hitches | Receiver Hitches
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2019 - 2020 | Buick Envision | Sport Utility | Class 3 Trailer Hitch: 4500 lbs 675/4,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 25 minutes |
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Envision 76300 (Part #DT76300) fits the following vehicles: 2019-2020 Buick Envision. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Envision 76300 (Part #DT76300) is designed to fit the 2019-2020 Buick Envision.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Envision 76300 (Part #DT76300) fits 2019-2020 Buick Envision models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Buick Envision 76300 (Part #DT76300) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part numbers 76300, 84300, and CQT76300 are designed for 2019-Current Buick Envision models. Visit the manufacturer's website for the most up-to-date information regarding specific application years and trim levels.
The maximum gross trailer weight is 4500 lb (2042 kg) and the maximum tongue weight is 675 lb (306 kg). However, do not exceed the lower of your towing vehicle manufacturer's rating or these limits.
Required tools include: ratchet, safety glasses, 1/2" drive sockets (15 mm, 11/16", and 8" socket extension), torque wrench, T15 torxbit socket, and crows foot. A 15 mm deep well socket is also needed to remove the existing M10 nut-washer assembly.
The fastener kit (76300F) includes: (2) carriage bolts 7/16-14 X 1.50 GR5, (2) spacer blocks 1/4 X 7/8 X 3.00 (part no. HE-2370-000), (2) conical washers 7/16 (part no. 01292007), (2) hex nuts 7/16-14, and (2) pull wires 7/16 (part no. 5481).
Yes. You must remove (2) fascia screws from the bottom edge using a T15 torxbit socket and keep them for reinstallation. The fascia is then gently pulled down during hitch installation and the screws are reinstalled after the hitch is secured.
Yes. Using a 15 mm deep well socket, remove (2) M10 nut-washer assemblies (1 per side) from the bottom of the bumper beam attachment before installing the hitch. These are reinstalled after the hitch is positioned.
1. Remove fascia screws using T15 torxbit socket. 2. Remove existing M10 nut-washer assemblies using 15 mm deep well socket. 3. Attach carriage bolts and spacer blocks to pull wires and feed through frame access holes. 4. Position hitch by pulling fascia down and raising hitch while guiding pull wires through bracket mounting holes and pushing hitch onto existing vehicle studs. 5. Install conical washers and hex nuts loosely, then install M10 nut-washer assemblies. 6. Torque all fasteners. 7. Reinstall fascia screws.
Attach the 7/16" carriage bolt and 1/4" spacer block to the coiled end of each pull wire. Feed the other end through the second (middle) access hole and bring it out through the rearmost hole in the bottom of the frame. Pull the fasteners inside the vehicle frame on both sides. Keep spacer blocks and bolts inside the frame to prevent interference. After positioning the hitch, use the pull wires to pull the carriage bolts and spacer blocks into position, then remove the pull wires.
Bend or kink the pull wire where it attaches to the carriage bolt and spacer block assembly. This keeps the spacer block separated from the bolt during installation, preventing them from becoming tangled or misaligned as you pull them through the frame.
Tighten all M10 fasteners to 38 lb-ft (52 N-m) using a torque wrench.
Tighten all 7/16-14 GR5 fasteners to 50 lb-ft (68 N-m) using a torque wrench. On the driver side, use a socket extension and crows foot to tighten the 7/16 nut.
The crows foot is used with a socket extension to reach and tighten the 7/16 hex nut on the driver side, where space or angle constraints prevent direct socket access. This tool allows proper torque application to the fastener.
Always wear safety glasses during installation. Observe safety precautions when working beneath a vehicle. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. A damaged hitch or ball must be removed and replaced immediately.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. Proper torque is needed to keep the hitch secure to the vehicle when towing.
Check all fasteners periodically to ensure they are tight and the hitch is securely mounted to your vehicle. The manual emphasizes checking the hitch frequently to ensure all fasteners and the ball are properly tightened.
Slow down when towing and never exceed any posted speed limit. If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up.
Load the trailer heavier in front. This helps maintain proper weight distribution and stability when towing.
Yes, part numbers 76300, 84300, and CQT76300 fit 2019-Current Buick Envision models. Check the manufacturer's website for specific trim level compatibility.
Maximum gross trailer weight is 4500 lb (2042 kg) and maximum tongue weight is 675 lb (306 kg). Do not exceed the lower of your vehicle manufacturer's rating or these limits.
You need a ratchet, safety glasses, 1/2" drive sockets (15 mm, 11/16", 8" extension), torque wrench, T15 torxbit socket, and crows foot.
Yes. Remove (2) fascia screws from the bottom edge using a T15 torxbit socket, and remove (2) M10 nut-washer assemblies from the bumper beam attachment using a 15 mm deep well socket. Keep these for reinstallation.
Tighten M10 fasteners to 38 lb-ft (52 N-m) and 7/16-14 GR5 fasteners to 50 lb-ft (68 N-m) using a torque wrench.
Always wear safety glasses during installation. Do not cut access holes with a torch. Observe safety precautions when working beneath the vehicle. If the hitch is removed, plug all holes to prevent water and exhaust fume entry.
Check frequently that all fasteners and the ball are properly tightened. Proper torque is essential to keep the hitch secure when towing.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $293.75. Current price is $193.92.You save $99.83 (34%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Ann
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
Total for 4 items:
$134.54$137.05
