Lippert

Trailer Bearing Replacement for 3,500-lb. Axle Hubs, 1.719 Inner Diameter Seal Part Number 2023133980 Genuine Lippert Replacement Part ...

Trailer Bearing Replacement for 2,000-lb. Axle Hubs - 1.5 Inner Diameter Seal Part Number 2023133979 Genuine Lippert Replacement Part ...

Stabilize your 5th wheel or travel trailer with the reliability of a manual RV scissor jack. These easy-to-use, economical jacks #285326 have a 5,000-lb. load capacity per jack, and help to keep your...

This replacement RV slide-out high-torque motor #287298 is for Lippert In-Wall slide-outs. It is a genuine Lippert replacement component, and it includes the motor assembly only. The complete...

Attaching Parts for 10,000-lb. Slipper Tandem Axles - 48-1/4 - No Equalizer Part Number 184175 Genuine Lippert Replacement Part ...

This crank handle is used to manually raise or lower our electric stabilizers in case of power failure. It is also used for our 5th wheel landing gear jacks, both power and manual. This same crank...

This replacement RV slide-out controller V-Sync II #13398-DO is for Lippert In-Wall slide-outs. It is a genuine Lippert replacement component, and it includes the controller module only. The complete...

Trailer Axle Attaching Parts for 10,000-lb. Slipper Tandem Axles Part Number 184173 Genuine Lippert Replacement Part ...

This versatile 3/4" hex head manual crank handle is compatible with a wide variety of Lippert components, including scissor jacks, power tongue jacks, Smart jacks, 5th wheel landing gear and many...

7 Brake Hub, 5 on 4.5; 1/2 Stud - 2,200 lbs. (with Bearing Cone Kit) Part Number 814209 Genuine Lippert Replacement Part ...

This replacement RV slide-out controller-to-motor harness #238992 is for Lippert In-Wall slide-outs. It is a genuine Lippert replacement component, and it includes the male-to-female wiring harness...

This replacement hydraulic hose end fitting with crimp-on coupling has a JIC-F port that is standard in Level Up towable hydraulic leveling systems.Inside hose diameter: 1/4" Fitting shape: straight...

Idler Hub, 5 on 4.5 - 3,500 lbs. (with Bearing Cone Kit) Part Number 814208 Genuine Lippert Replacement Part Features ...

This replacement IG-42 10mm RV slide-out motor #236575 is for Lippert In-Wall slide-outs. It is a genuine Lippert replacement component, and it includes the motor and wiring harness only. The...

Lippert power landing gear is standard on most 5th wheel RVs produced today. This leading leg repair kit will get you back to camping and enjoying the great features of your power landing gear.Lead...