Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
LUVERNE MegaStep 6-1/2" running boards are the ultimate combination of style and functionality. They have 5" wide treads that extend the full length of the side steps, and they feature a strong, lightweight aluminum core with a stainless steel trim for a bright, clean accent. MegaStep running boards mount easily with vehicle-specific brackets, pre-installed fasteners and an adjustable design to perfectly fit your unique vehicle. LUVERNE MegaSteps are designed to offer the best features from a variety of side accessory options. Their non-skid rubber treads cover the entire topside of the boards, giving them the functionality and convenience of a running bo ard. However, unlike most running boards, MegaSteps are styled after the popular look of many nerf bars. This makes them a unique and useful extension of your vehicle. To give MegaStep running boards an even greater advantage over other side steps, they are built to outlast the elements. We construct them with a strong, lightweight aluminum base that naturally resists rust, and we finish them with a high-polish stainless steel trim. The trim is a heavy-duty, 18-gauge stainless steel to make it more than just a fancy accent, and its highly polished finish gives the running boards a bright, long-lasting shine. Installation of LUVERNE MegaStep running boards is easy and customizable. The boards come with pre-installed fasteners and attach using high-strength, vehicle-specific mounting brackets. They are also uniquely designed to be adjustable inward, outward, forward or backward, giving you complete freedom to position the steps wherever you want them. This particular set of running boards is designed to fit specific years of the Toyota Tundra (see application info to verify fitment). Brackets for these running boards are included but ship separately.
LUVERNE MegaStep 6-1/2" running boards are the ultimate combination of style and functionality, featuring 5" wide rubber treads that extend the full length of the side steps for dependable, non-skid traction wherever the road takes you.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2007 - 2021 | Toyota Tundra | Extended Cab Pickup | — |
Yes, the 570752 MEGA STEPS BRACKETS are designed for 2007 Toyota Tundra Double Cab and Crew Maxx pickups. The kit includes four mounting brackets (part numbers 551362, 551363, 551364, and 551365) that attach to existing threaded inserts in the rocker panel interior wall.
The manual specifies these brackets are for 2007 Toyota Tundra Double Cab and Crew Maxx pickups only. Compatibility with other model years is not stated in the manual. Contact the manufacturer or a fitment specialist to confirm fitment for other years.
The kit includes four mounting brackets (two each of part numbers 551362, 551363, 551364, and 551365), 16 M8-1.25×25 mm zinc-plated hex head cap screws (102549), 16 5/16" lock washers (100030), 16 5/16" flat washers (100034), 16 5/16-18 UNC serrated flange nuts (102680), and 8 5/16-18 UNC square head screws (106880). The MEGA STEP BOARD ASSEMBLY is sold separately.
No. The MEGA STEP BOARD ASSEMBLY is sold separately and must be purchased in addition to the 570752 MEGA STEPS BRACKETS kit. The step board length varies depending on the application.
No. The brackets attach to existing threaded inserts in the rocker panel interior wall. No drilling is required.
Each bracket is identified by notches on the inboard edge: #1 bracket has 1 notch, #2 has 2 notches, #3 has 3 notches, and #4 has 4 notches. Bracket #1 is positioned at the front of the vehicle. The brackets are part numbers 551362 (#1), 551363 (#2), 551364 (#3), and 551365 (#4).
1. Verify all parts are present before starting. 2. Attach the four mounting brackets to the rocker panel using the existing threaded inserts, positioning them correctly by notch identification (#1 at front). 3. Attach the step board assembly to the brackets using the square head screws and serrated flange nuts. 4. Position and adjust the step as desired before final tightening.
Position each bracket so both holes align with the threaded inserts in the rocker panel interior wall. Attach the top of the bracket using one M8-1.25×25 mm zinc-plated hex head cap screw (102549), one 5/16" flat washer (100034), and one lock washer (100030). Level the brackets and tighten to 19 lb-ft.
Insert four 5/16" square head screws (106880) into the center slot on the underside of the step. Position the step on the brackets so the square head screws are located in the slots and the step is centered front to rear on the cab. Install 5/16" serrated flange nuts (102680) on the screws and tighten to 19 lb-ft.
Yes. The manual instructs to locate the step in and out as desired before final tightening. This means you can slide the step along the bracket slots to adjust its position before tightening the serrated flange nuts to 19 lb-ft.
All fasteners are tightened to 19 lb-ft. This applies to both the M8-1.25×25 mm hex head cap screws attaching the brackets to the rocker panel and the 5/16" serrated flange nuts securing the step board to the brackets.
Each bracket is attached using one M8-1.25×25 mm zinc-plated hex head cap screw (part 102549), one 5/16" flat washer (part 100034), and one 5/16" lock washer (part 100030). The fastener is tightened to 19 lb-ft.
Four 5/16-18 UNC square head screws (part 106880) are inserted into the center slot on the underside of the step. Four 5/16-18 UNC serrated flange nuts (part 102680) are installed on the screws and tightened to 19 lb-ft.
Yes, the 570752 MEGA STEPS BRACKETS are designed for 2007 Toyota Tundra Double Cab and Crew Maxx pickups. They attach to existing threaded inserts in the rocker panel.
No, the MEGA STEP BOARD ASSEMBLY is sold separately. The 570752 kit includes only the mounting brackets and fasteners.
All fasteners are tightened to 19 lb-ft, including the bracket-to-rocker-panel screws and the step-to-bracket nuts.
Yes. Position and adjust the step in and out as desired before tightening the serrated flange nuts to 19 lb-ft.
On Sale Today
Original price was $855.95. Current price is $750.95.You save $105.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 24 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
