Our in-house experts typically reply within one business day.
Tekonsha
Verify Fitment
Select your vehicle to confirm this part fits.
1997 - 2003 Infiniti QX4
Confirmed to Fit
1998 - 2001 Nissan Altima
Confirmed to Fit
1996 - 2004 Nissan Pathfinder
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Tekonsha T-One connector (also referred to as T-Connector) wiring harnesses are the fastest and easiest way to add an electrical connector to the back of your vehicle. These connectors are used to link the wiring from your vehicle to the trailer when towing. Tekonsha T-One connectors feature custom designs to fit each vehicle make and model based on manufacturer specifications. Plus, the Plug & Play connectors on the end of the wires make it easy to install. No cutting or splicing!
Tekonsha offers the largest, most complete line of T-One connectors. To install a Tekonsha T-One wiring harness, simply locate your vehicle's wiring harness connector typically behind the vehicle taillight - unplug the connection and insert the T-Connector into the vehicle's harness. It's that easy! So what are you waiting for? Hit the road with the peace of mind only Tekonsha can provide. Life's a Journey. Stop Often.
| BRAND: | TEKONSHA |
| PART NUMBER: | 118361 |
| WARRANTY: | LIMITED 1 YEAR WARRANTY |
| WEIGHT: | 0.86 LBS |
| UNIVERSAL OR SPECIFIC FIT: | SPECIFIC |
| CIRCUIT PROTECTED: | YES |
| HARNESS TYPE: | MALE FEMALE |
| TERMINAL QUANTITY: | 4 |
| WIRE COLORS: | BROWN, GREEN, YELLOW, WHITE |
| WIRE QUANTITY: | 4 |
| WIRE GAUGE: | 16 GA. |
| POWER LEAD REQUIRED: | NO |
| ELECTRICAL SYSTEM TYPE: | 3-WIRE SYSTEM |
| HARDWARE INCLUDED: | YES |
Tekonsha is a leading manufacturer of electronic trailer brake controllers, pioneering the category in the 1970s. The lineup spans proportional units such as the Prodigy P3 and Prodigy iD, time-delayed controllers, the wireless Prodigy RF, plus vehicle-specific wiring harnesses, adapters and trailer brake components engineered for smooth, predictable stopping at any speed.
Tekonsha Engineering Company began in 1964 building RV steps and mirrors. Within a few years it had found its real calling, and by the 1970s Tekonsha was pioneering the manufacture of electronic trailer brake controllers, the product category that still defines the brand. More than half a century later it remains the reference name in trailer braking and is part of the Horizon Global group alongside Reese, Draw-Tite, Fulton, Bulldog and Wesbar.
A brake controller is the component that tells a trailer's electric brakes how hard to work and when, and getting that right is the difference between a controlled stop and a shove from behind. Tekonsha builds both major types. Proportional controllers use an internal accelerometer to sense how quickly the tow vehicle is slowing and apply trailer braking to match, so light braking stays light and hard braking is immediate. Time-delayed controllers ramp to a preset output over a fixed interval, a simpler and more economical approach that suits occasional towing.
The current brake controller range covers most of that ground. The Prodigy iD pairs with a phone through Tekonsha's EDGE technology for setup and monitoring, the P3 offers storable settings for multiple trailers and a trilingual colour LED display, the Prodigy P2 adds a dimmable display and boost mode for heavier loads, and the Voyager keeps operation simple and dependable. The Prodigy RF mounts to the trailer itself and controls wirelessly, which suits rental fleets and drivers who swap tow vehicles.
Installation is supported by vehicle-specific brake control harnesses that plug into a factory connector rather than requiring cut-and-splice wiring, along with mounting brackets and adapters. Matched controller bundles pair a unit with the correct harness. Products are tested to meet and often exceed published industry standards.
Experts available to answer your questions
Call 888-634-94941 Year
3 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1997 - 2003 | Infiniti QX4 | Tow Harness T: Connector Assembly Drilling Required Install Time is 20 minutes |
| 1998 - 2001 | Nissan Altima | Tow Harness T: Connector Assembly Drilling Required Install Time is 20 minutes |
| 1996 - 2004 | Nissan Pathfinder | Tow Harness T: Connector Assembly Drilling Required Install Time is 20 minutes |
The 1996-2004 Nissan Pathfinder, 1997-2003 Infiniti QX4, 1998-2001 Nissan Altima Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118361 (Part #TK118361) fits the following vehicles: 1997-2003 Infiniti QX4; 1998-2001 Nissan Altima; 1996-2004 Nissan Pathfinder. Always verify your specific year, make, and model before ordering.
The 1996-2004 Nissan Pathfinder, 1997-2003 Infiniti QX4, 1998-2001 Nissan Altima Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118361 (Part #TK118361) fits 1997-2003 Infiniti QX4 models. The 2004 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 1996-2004 Nissan Pathfinder, 1997-2003 Infiniti QX4, 1998-2001 Nissan Altima Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118361 (Part #TK118361) is designed to fit the 1997-2003 Infiniti QX4.
The 1996-2004 Nissan Pathfinder, 1997-2003 Infiniti QX4, 1998-2001 Nissan Altima Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118361 (Part #TK118361) Drilling is required for installation. Basic hand tools are typically all you need.
Yes, this T-connector harness is designed for Nissan Altima. The installation accesses the vehicle's wiring connectors behind the tail lamps via the trunk.
Yes, this harness is compatible with both Nissan Pathfinder and Infiniti QX4. Installation on these models accesses the wiring through the rear door and interior trim panel behind the tail lamps.
This unit is rated for 4 amps per circuit.
You will need a drill with a 3/32" bit to create the ground hole. A test light or trailer is required to test the installation after completion. A cable tie or screw (both provided) is needed to secure the black box to the vehicle.
Open the trunk, remove the plastic threshold plate, and pull back the trunk lining behind the tail lamps on both sides to expose the vehicle's wiring connectors. The vehicle's connectors will match the ends of the T-connector harness.
Open the rear door, remove the plastic threshold plate, and partially remove the rear interior trim panel on both sides of the vehicle behind the tail lamps. Look for a square access hole behind the tail lamps and locate the vehicle wiring connectors inside.
First, separate the driver's side connectors and insert the T-connector with the yellow wire between them. Then route the wire across to the passenger's side and repeat using the T-connector with the green wire.
Yes, you must drill a 3/32" hole on the driver's side near the connectors to secure the white wire ground. Do not drill into the vehicle floor or bed; locate a suitable grounding point on the vehicle body instead.
Drill the 3/32" hole on the driver's side near the connectors at a suitable grounding point on the vehicle body. Do not drill into the vehicle floor or bed.
The ground hole must be 3/32" in diameter.
The harness includes a T-connector with a yellow wire for the driver's side and a T-connector with a green wire for the passenger's side. A white wire is used for the ground connection.
Secure the black box to the vehicle using either the cable tie or the screw provided with the harness.
Test the installation with a test light or trailer after all connections are complete and before reattaching the interior trim panels.
After testing, reattach all interior trim panels, the threshold plate, and the trunk lining (or rear interior trim on Pathfinder/QX4).
The 18361-037 T-connector harness fits Nissan Altima, Nissan Pathfinder, and Infiniti QX4.
Yes, you must drill a 3/32" hole for the ground wire on the driver's side near the connectors. Do not drill into the vehicle floor or bed.
The harness includes a screw for securing the white ground wire eyelet and a cable tie or screw for securing the black box to the vehicle.
This unit is rated for 4 amps per circuit.
Test the installation with a test light or trailer before reattaching the interior trim panels.
Total for 4 items:
$147.84
Jennifer
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 12 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
