Tekonsha Tow Harness, 7-Way TK118247TekonshaOriginal price was $112.50. Current price is $99.29.Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
Tekonsha
Verify Fitment
Select your vehicle to confirm this part fits.
2005 - 2024 Nissan Frontier
Confirmed to Fit
2005 - 2007 Nissan Pathfinder
Confirmed to Fit
2008 - 2012 Nissan Pathfinder
Confirmed to Fit
2005 - 2015 Nissan Xterra
Confirmed to Fit
2009 - 2012 Suzuki Equator
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Tekonsha Tow Harnesses are the replacement for your factory electrical connector to the back of your vehicle. These harnesses are used to link the wiring from your vehicle to the trailer when towing. Tekonsha Tow Harnesses feature custom designs to fit each vehicle make and model based on manufacturer specifications. Plus, the Plug & Play connectors on the end of the wires make it easy to install. No cutting or splicing!
Tekonsha offers the largest, most complete line of Replacement Tow Harnesses. Hit the road with the peace of mind only Tekonsha can provide. Life's a Journey. Stop Often.
| BRAND: | TEKONSHA |
| PART NUMBER: | 118267 |
| WARRANTY: | LIMITED 1 YEAR WARRANTY |
| WEIGHT: | 0.95 LBS |
| UNIVERSAL OR SPECIFIC FIT: | SPECIFIC |
| CIRCUIT PROTECTED: | NO |
| HARNESS TYPE: | MALE FEMALE |
| TERMINAL QUANTITY: | 7 |
| WIRE COLORS: | BROWN, GREEN, YELLOW, WHITE |
| WIRE QUANTITY: | 7 |
| WIRE GAUGE: | 18 AWG, .85 AVSS |
| POWER LEAD REQUIRED: | NO |
| ELECTRICAL SYSTEM TYPE: | 3-WIRE SYSTEM |
| HARDWARE INCLUDED: | YES |
| AMPERAGE: | 20 A |
Tekonsha is a leading manufacturer of electronic trailer brake controllers, pioneering the category in the 1970s. The lineup spans proportional units such as the Prodigy P3 and Prodigy iD, time-delayed controllers, the wireless Prodigy RF, plus vehicle-specific wiring harnesses, adapters and trailer brake components engineered for smooth, predictable stopping at any speed.
Tekonsha Engineering Company began in 1964 building RV steps and mirrors. Within a few years it had found its real calling, and by the 1970s Tekonsha was pioneering the manufacture of electronic trailer brake controllers, the product category that still defines the brand. More than half a century later it remains the reference name in trailer braking and is part of the Horizon Global group alongside Reese, Draw-Tite, Fulton, Bulldog and Wesbar.
A brake controller is the component that tells a trailer's electric brakes how hard to work and when, and getting that right is the difference between a controlled stop and a shove from behind. Tekonsha builds both major types. Proportional controllers use an internal accelerometer to sense how quickly the tow vehicle is slowing and apply trailer braking to match, so light braking stays light and hard braking is immediate. Time-delayed controllers ramp to a preset output over a fixed interval, a simpler and more economical approach that suits occasional towing.
The current brake controller range covers most of that ground. The Prodigy iD pairs with a phone through Tekonsha's EDGE technology for setup and monitoring, the P3 offers storable settings for multiple trailers and a trilingual colour LED display, the Prodigy P2 adds a dimmable display and boost mode for heavier loads, and the Voyager keeps operation simple and dependable. The Prodigy RF mounts to the trailer itself and controls wirelessly, which suits rental fleets and drivers who swap tow vehicles.
Installation is supported by vehicle-specific brake control harnesses that plug into a factory connector rather than requiring cut-and-splice wiring, along with mounting brackets and adapters. Matched controller bundles pair a unit with the correct harness. Products are tested to meet and often exceed published industry standards.
Experts available to answer your questions
Call 888-634-94941 Year
5 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2005 - 2024 | Nissan Frontier | Tow Harness Wiring Package Uses all existing holes. No Drilling required Install Time is 5 minutes May be equipped with Factory Tow Prep Plug |
| 2005 - 2007 | Nissan Pathfinder | Tow Harness Wiring Package Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 2008 - 2012 | Nissan Pathfinder | Tow Harness Wiring Package Uses all existing holes. No Drilling required Install Time is 5 minutes Except with Factory 4: Flat |
| 2005 - 2015 | Nissan Xterra | Tow Harness Wiring Package Uses all existing holes. No Drilling required Install Time is 5 minutes May be equipped with Factory Tow Prep Plug |
| 2009 - 2012 | Suzuki Equator | Tow Harness Wiring Package Uses all existing holes. No Drilling required Install Time is 5 minutes May be equipped with Factory Tow Prep Plug |
The Tekonsha Tow Harness, 7-Way TK118267 (Part #TK118267) fits 2005-2024 Nissan Frontier models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the Tekonsha Tow Harness, 7-Way TK118267 (Part #TK118267) is designed to fit the 2005-2024 Nissan Frontier.
The Tekonsha Tow Harness, 7-Way TK118267 (Part #TK118267) fits the following vehicles: 2005-2024 Nissan Frontier; 2005-2012 Nissan Pathfinder; 2005-2015 Nissan Xterra; 2009-2012 Suzuki Equator. Always verify your specific year, make, and model before ordering.
The Tekonsha Tow Harness, 7-Way TK118267 (Part #TK118267) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, this T-Connector is designed for Nissan Pathfinder, Xterra, and Frontier models. The vehicle tow plugs are located near the driver's side rear tire. However, if you have a Nissan Xterra without a tow package, the taillight function on the tow plug will not work unless you purchase an OEM relay harness separately from a Nissan dealer.
The T-Connector will physically install on a Nissan Xterra without a tow package, but the taillight function on the tow plug will not work. To enable taillight function, you must purchase an OEM relay harness separately from a Nissan dealer.
The T-Connector package includes the T-connector harness, a 7-way socket, and cable ties for securing the harness. A bracket or electrical box for mounting the 7-way socket is not included and must be purchased separately.
The vehicle tow plugs are located near the driver's side rear tire, underneath the vehicle.
Yes. All connector surfaces must be clean and free of dirt before connecting the T-Connector. This applies whether you are performing a new installation or replacing an existing tow plug harness.
Connect the T-Connector end to the vehicle's mating connector. Be careful not to damage the locking tabs and ensure that the connectors are fully inserted with the locking tabs in place. All connector surfaces should be clean and free of dirt before connecting.
Plug the 7-way socket (provided) into the Trailer Tow Harness and route it to the center of the vehicle. Mount the 7-way socket end in an accessible location using a bracket or electrical box (not included). Secure the remainder of the T-connector harness with the provided cable ties to prevent damage or rattling.
Use the cable ties provided to secure the remainder of the T-connector harness. Be careful to avoid any areas that would cut or pinch the wire. This prevents damage and rattling during vehicle operation.
The maximum amperage for stop/turn lights is 10 amps. Do not exceed this limit, as overloading the circuit can cause fires.
The maximum amperage for tail lights is 10 amps. Do not exceed this limit, as overloading the circuit can cause fires.
The maximum amperage for backup lights is 10 amps. Do not exceed this limit, as overloading the circuit can cause fires.
The maximum amperage for the power circuit is 20 amps. Do not exceed this limit, as overloading the circuit can cause fires.
The maximum amperage for trailer brakes is 18 amps for 3 axles with 6 brakes. Do not exceed this limit, as overloading the circuit can cause fires.
All connections must be complete for the T-Connector to function properly. Test and verify the installation with a test light or by connecting an actual trailer once installed.
The T-Connector (118265-037) fits Nissan Pathfinder, Xterra, and Frontier. Note: Xterra without a tow package requires a separate OEM relay harness for taillight function.
The manual does not specify required tools. You will need a bracket or electrical box (not included) to mount the 7-way socket. Cable ties are provided for securing the harness.
The manual does not specify whether battery disconnection is required. Consult your vehicle's owner's manual for electrical work safety procedures.
Stop/turn lights: 10A; tail lights: 10A; backup: 10A; power circuit: 20A; trailer brakes (3 axles/6 brakes): 18A. Do not exceed these limits as overloading can cause fires.
Test the installation with a test light or by connecting an actual trailer. All connections must be complete for proper function.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Sam
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
