UWS Bright Aluminum 63" Slim-Line Crossover Truck Tool Box TBS-63-SLUWSOriginal price was $584.95. Current price is $530.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
2005 - 2024 Toyota Tacoma
Confirmed to Fit
2005 - 2015 Toyota Tacoma
Confirmed to Fit
2005 - 2023 Toyota Tacoma
Confirmed to Fit
2005 - 2014 Toyota Tacoma
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: BRIGHT ALUMINUM
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true American way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is assembled, right here in the USA, from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. This particular box features a slim-line design, providing adequate clearance for truck beds that have extremely limited space between the wheel wells and truck cab. It also features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
37 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2017 - 2022 | Chevrolet Colorado | Crew Cab Pickup | 5'2" Bed | — |
| 2015 - 2016 | Chevrolet Colorado | Crew Cab Pickup | 5'3" Bed | — |
| 2015 - 2018 | Chevrolet Colorado | Crew Cab Pickup | 6'2" Bed | — |
| 2015 - 2018 | Chevrolet Colorado | Extended Cab Pickup | 6'2" Bed | — |
| 2000 - 2004 | Dodge Dakota | Extended Cab Pickup | 5'3" Bed | — |
| 2000 - 2004 | Dodge Dakota | Standard Cab Pickup | 5'3" Bed | — |
| 2005 - 2008 | Dodge Dakota | Extended Cab Pickup | 5'5" Bed | — |
| 1997 - 2004 | Dodge Dakota | Extended Cab Pickup | 6'6" Bed | — |
| 1997 - 2004 | Dodge Dakota | Standard Cab Pickup | 6'6" Bed | — |
| 2009 - 2010 | Dodge Dakota | Crew Cab Pickup | 6'7" Bed | — |
| 2001 - 2005 | Ford Explorer Sport Trac | Crew Cab Pickup | 4'2" Bed | — |
| 1997 - 2003 | Ford F-150 | Extended Cab Pickup | 6'7" Bed | — |
| 1997 - 2003 | Ford F-150 | Standard Cab Pickup | 6'7" Bed | — |
| 2004 | Ford F-150 Heritage | Extended Cab Pickup | 6'7" Bed | — |
| 2004 | Ford F-150 Heritage | Standard Cab Pickup | 6'7" Bed | — |
| 2019 - 2023 | Ford Ranger | Crew Cab Pickup | 5'1" Bed | — |
| 1998 - 2005 | Ford Ranger | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2005 | Ford Ranger | Standard Cab Pickup | 6' Bed | — |
| 2006 - 2011, 2019 - 2023 | Ford Ranger | Extended Cab Pickup | 6'1" Bed | — |
| 2006 - 2011 | Ford Ranger | Standard Cab Pickup | 6'1" Bed | — |
| 1998 - 2005 | Ford Ranger | Standard Cab Pickup | 7' Bed | — |
| 2006 - 2011 | Ford Ranger | Standard Cab Pickup | 7'1" Bed | — |
| 2015 - 2022 | GMC Canyon | Crew Cab Pickup | 5'2" Bed | — |
| 2015 - 2018 | GMC Canyon | Crew Cab Pickup | 6'2" Bed | — |
| 2015 - 2018 | GMC Canyon | Extended Cab Pickup | 6'2" Bed | — |
The UWS Bright Aluminum 63" Slim-Line Truck Tool Box, Low Profile TBS-63-SL-LP (Part #BHSGTBS-63-SL-LP) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
Yes, the UWS Bright Aluminum 63" Slim-Line Truck Tool Box, Low Profile TBS-63-SL-LP (Part #BHSGTBS-63-SL-LP) is designed to fit the 2015-2022 Chevrolet Colorado.
The UWS Bright Aluminum 63" Slim-Line Truck Tool Box, Low Profile TBS-63-SL-LP (Part #BHSGTBS-63-SL-LP) fits 2015-2022 Chevrolet Colorado models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Bright Aluminum 63" Slim-Line Truck Tool Box, Low Profile TBS-63-SL-LP (Part #BHSGTBS-63-SL-LP) fits the following vehicles: 2015-2022 Chevrolet Colorado; 1997-2010 Dodge Dakota; 2001-2005 Ford Explorer Sport Trac; 1997-2003 Ford F-150; 2004 Ford F-150 Heritage; 1998-2023 Ford Ranger; 2015-2022 GMC Canyon; 2006-2009 Mitsubishi Raider; 2005-2021 Nissan Frontier; 2011 Ram Dakota; 2009-2012 Suzuki Equator; 2005-2024 Toyota Tacoma. Always verify your specific year, make, and model before ordering.
The UWS Bright Aluminum 63" Slim-Line Truck Tool Box, Low Profile TBS-63-SL-LP (Part #BHSGTBS-63-SL-LP) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one divider tray (not included with all models), two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A key is also provided for locking the tool box.
The manual does not specify which truck bed lengths or cab styles are compatible with this crossover tool box. You should consult your dealer or the manufacturer to confirm fitment for your specific vehicle before purchasing.
Yes, clearance between the open lid and the top and back of the cab must be verified during installation. In Step 1, open the tool box lid and ensure there is adequate clearance. If clearance is insufficient, your truck bed or cab configuration may not be compatible with this crossover design.
You will need a ratchet, socket set, and tape measure. These are listed as the required tools for installation.
The manual does not explicitly state whether drilling is required for all installations. The tool box uses adhesive rail pads and J-hook fasteners that attach to existing bed rails. However, a warning advises checking under your truck before drilling to avoid fuel lines, brake lines, electrical wires and fuel tanks. Consult your dealer to determine if drilling is necessary for your specific truck.
Before drilling, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Precaution must also be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision.
Place the tool box in the truck bed and check clearance with the lid open. Attach the adhesive side of the rail pads to the underside of the tool box ends. Then place the tool box with the adhered rail pads on top of the truck bed rails. Use a tape measure to ensure the tool box is centered in the truck bed.
Use only one J-hook assembly on each side of the vehicle, for a total of two J-hooks. Each J-hook is placed under the lip of the bed rail with the threaded end inserted up through the slot, then secured with a washer and nut.
First, snug the hardware (washer and nut) but do not fully tighten. After snugging both sides, re-measure to ensure the tool box is centered and allows lid clearance when open. Once you have confirmed proper positioning, fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline; if you purchase replacement hardware, use the torque specifications provided with that hardware.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
Yes. Never exceed the vehicle manufacturer's recommended capacity. Your truck's owner manual will specify the maximum load capacity for the bed.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Verify that the tool box is centered in the truck bed and that the lid has adequate clearance when open. Check that there is no interference with factory-installed safety equipment.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Clean the product with mild automotive detergent. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance. Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
Periodic inspections should be performed to ensure all mounting hardware remains tight. Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them. Periodically lubricate the strikers and locks to ensure optimum performance.
The manual does not specify compatible truck models or bed lengths. Consult your dealer or the manufacturer with your vehicle details to confirm fitment before purchasing.
You need a ratchet, socket set, and tape measure.
The manual does not explicitly state whether drilling is required. The tool box uses adhesive rail pads and J-hook fasteners. Consult your dealer to determine if drilling is necessary for your truck.
Tighten 1/4" bolts to 3 ft-lbs. This is a general guideline; use the torque specifications provided with replacement hardware.
No. Do not store flammables, explosives or hazardous materials such as gasoline, solvents, propane tanks or acetylene tanks. This creates a danger of explosion.
Ensure all fasteners are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
On Sale Today
Original price was $584.95. Current price is $530.95.You save $54.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Tue, Aug 11 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.