UWS EC50003 69-Inch Heavy-Wall Aluminum Truck Tool Box with Low Profile, RigidCore LidUWS$697.95In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2013, 2015 - 2018, 2020 - 2026 Chevrolet Silverado 3500 HD
Confirmed to Fit
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2007 - 2013, 2015 - 2018, 2020 - 2026 GMC Sierra 3500 HD
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Stainless steel lock handles for security and corrosion-resistant operation
Connecting rod allows for convenient operation from driver or passenger side
.png)
Stainless steel lock handles for security and corrosion-resistant operation
Finish: BRIGHT ALUMINUM
Material: Aluminum
Product Weight: 45.400
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degr ees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability (NOTE: This product is heavily packaged for parcel shipping). UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box h
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited lifetime warranty (one-year finish, one-year parts)
UWS | Tough. Reliable.
The UWS EC50007 69-Inch Heavy-Wall Aluminum Truck Tool Box, RigidCore Lid (Part #BHSGEC50007) fits 2004-2026 Chevrolet Silverado 1500 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS EC50007 69-Inch Heavy-Wall Aluminum Truck Tool Box, RigidCore Lid (Part #BHSGEC50007) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Silverado 1500 configuration.
Yes, the UWS EC50007 69-Inch Heavy-Wall Aluminum Truck Tool Box, RigidCore Lid (Part #BHSGEC50007) is designed to fit the 2004-2026 Chevrolet Silverado 1500.
The UWS EC50007 69-Inch Heavy-Wall Aluminum Truck Tool Box, RigidCore Lid (Part #BHSGEC50007) fits the following vehicles: 2004-2026 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 Classic; 2022 Chevrolet Silverado 1500 LTD; 1999 Chevrolet Silverado 2500; 2020-2026 Chevrolet Silverado 2500 HD; 2020-2026 Chevrolet Silverado 3500 HD; 2002-2010 Dodge Ram 1500; 1997-2026 Ford F-150; 2004 Ford F-150 Heritage; 1999-2026 Ford F-250 Super Duty; 1999-2026 Ford F-350 Super Duty; 2023-2026 Ford F-450 Super Duty; 2004-2026 GMC Sierra 1500; 2007 GMC Sierra 1500 Classic; 2022 GMC Sierra 1500 Limited; 1999 GMC Sierra 2500; 2020-2026 GMC Sierra 2500 HD; 2020-2026 GMC Sierra 3500 HD; 2006-2008 Lincoln Mark LT; 2004-2015 Nissan Titan; 2019-2026 Ram 1500; 2007-2021 Toyota Tundra. Always verify your specific year, make, and model before ordering.
The UWS EC50007 69-Inch Heavy-Wall Aluminum Truck Tool Box, RigidCore Lid (Part #BHSGEC50007) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is not included with all models. Refer to your specific product documentation to confirm whether a divider tray is included with your purchase.
The tool box is designed to fit truck beds with rails. The manual does not specify which vehicle models, bed lengths, or cab styles are compatible. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific truck before purchasing.
Yes, clearance between the open lid and the top and back of the cab is a required part of installation. In Step 1, you must open the tool box lid and ensure there is clearance before proceeding. If clearance is not adequate, the tool box may not be suitable for your vehicle. Verify this during the placement phase before fastening.
You will need a ratchet, socket set, and tape measure. A ratchet and socket set are required to tighten the J-hook fasteners (washer and nut). The tape measure is required to center the tool box in the truck bed and verify lid clearance.
The manual does not explicitly state whether drilling is required. The installation uses J-hooks that insert through existing bed rail slots and are secured with washers and nuts. If your truck bed does not have suitable slots for the J-hooks, drilling may be necessary. Before drilling into your truck bed, check underneath your vehicle to ensure the drill location does not puncture brake lines, fuel lines, electrical wires, fuel tanks or other components.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Take precaution that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. After drilling, treat or seal all fasteners and exposed metal in any holes to prevent corrosion.
Use a tape measure to ensure the tool box is centered in the truck bed. This measurement should be taken in Step 1 after placing the tool box with the rail pads on top of the truck bed rails. Re-measure again in Step 2 after installing the J-hooks but before fully tightening the hardware to confirm the tool box remains centered and allows lid clearance when open.
The rail pads are protective pads that attach to the underside of the tool box ends. Attach the adhesive side of each rail pad to the underside of the tool box ends, then place the tool box with the rail pads adhered on top of the truck bed rails. The rail pads help protect the truck bed and tool box during installation and use.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side of the vehicle. Attach with a washer and nut, and snug the hardware but do not fully tighten at this stage. Repeat on the other side. After re-measuring to ensure the tool box is centered and allows lid clearance when open, fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline. If you purchase replacement hardware, use the torque specifications provided with that hardware. Apply torque after the tool box is centered and lid clearance is confirmed.
If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them. Periodically lubricate the strikers and locks to ensure optimum performance.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs on the finish. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Danger of explosion exists if these materials are stored in the tool box.
Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify the tool box weight capacity. Contact CURT Group at 877-287-8634 or consult your dealer for the weight capacity of your specific tool box model.
Yes. This product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
No. Do not modify this product. Never modify this product. Use it only for purposes for which it was designed. If you have questions regarding the installation, operation, use and limits of this product, consult your dealer.
Yes. Treat or seal all fasteners and exposed metal in any holes drilled in your vehicle to prevent corrosion. This is especially important for fasteners near the fuel tank.
The UWS Crossover Truck Tool Box is designed for truck beds with rails. Specific vehicle compatibility is not listed in the manual. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your truck.
You need a ratchet, socket set, and tape measure. No drilling is required if your truck bed has existing rail slots for the J-hooks.
The manual does not explicitly state whether drilling is required. The J-hooks insert through existing bed rail slots. If your truck bed lacks suitable slots, drilling may be necessary—but first check underneath your vehicle to avoid puncturing brake lines, fuel lines, electrical wires or fuel tanks.
The 1/4" fasteners (washer and nut) should be torqued to 3 ft-lbs. This is a general guideline; if you purchase replacement hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives, hazardous materials or hazardous waste—such as gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks or cutting torches. Danger of explosion exists.
Before every trip, ensure all knobs, bolts, screws, straps and locks are firmly secured. Periodically re-tighten and inspect all components for wear, corrosion and fatigue. Lubricate strikers and locks regularly.
Yes. The tool box can reduce your ability to see through the rear and side windows. Extra precaution should be taken when driving with this product installed.
140 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2019 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'10" Bed | — |
| 2004 - 2006 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'9" Bed | — |
| 2014 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 6'7" Bed | — |
| 1999 - 2026 | Chevrolet Silverado 1500 | Extended Cab Pickup | 6'7" Bed | — |
| 1999 - 2026 | Chevrolet Silverado 1500 | Standard Cab Pickup | 6'7" Bed | — |
| 2004 - 2006 | Chevrolet Silverado 1500 | Crew Cab Pickup | 8'2" Bed | — |
| 1999 - 2013 | Chevrolet Silverado 1500 | Extended Cab Pickup | 8'2" Bed | — |
| 1999 - 2026 | Chevrolet Silverado 1500 | Standard Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Crew Cab Pickup | 5'9" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Extended Cab Pickup | 6'7" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Standard Cab Pickup | 6'7" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Crew Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Extended Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Standard Cab Pickup | 8'2" Bed | — |
| 2019 | Chevrolet Silverado 1500 LD | Extended Cab Pickup | 6'7" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Crew Cab Pickup | 5'10" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Standard Cab Pickup | 8'2" Bed | — |
| 1999 - 2004 | Chevrolet Silverado 2500 | Extended Cab Pickup | 6'7" Bed | — |
| 1999 - 2004 | Chevrolet Silverado 2500 | Standard Cab Pickup | 6'7" Bed | — |
| 2004 | Chevrolet Silverado 2500 | Crew Cab Pickup | 8'2" Bed | — |
| 1999 - 2004 | Chevrolet Silverado 2500 | Extended Cab Pickup | 8'2" Bed | — |
| 1999 - 2004 | Chevrolet Silverado 2500 | Standard Cab Pickup | 8'2" Bed | — |
| 2020 - 2026 | Chevrolet Silverado 2500 HD | Extended Cab Pickup | 6'10" Bed | — |
| 2001 - 2013, 2015 - 2019 | Chevrolet Silverado 2500 HD | Extended Cab Pickup | 6'7" Bed | — |
| 2001 - 2019 | Chevrolet Silverado 2500 HD | Crew Cab Pickup | 8'2" Bed | — |
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
