Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2010 Hummer H3T
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability (NOTE: This product is heavily packaged for parcel shipping). UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a ful l 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability (NOTE: This product is heavily packaged for parcel shipping).
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
20 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2023 - 2026 | Chevrolet Colorado | Crew Cab Pickup | 5'2" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Extended Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Standard Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Standard Cab Pickup | 7'5" Bed | — |
| 2023 - 2026 | GMC Canyon | Crew Cab Pickup | 5'2" Bed | — |
| 1994 - 2003 | GMC Sonoma | Extended Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | GMC Sonoma | Standard Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | GMC Sonoma | Standard Cab Pickup | 7'5" Bed | — |
| 2006 - 2014 | Honda Ridgeline | Crew Cab Pickup | 5' Bed | — |
| 2009 - 2010 | Hummer H3T | Crew Cab Pickup | 4'11" Bed | If your model is equipped with a factory track-system, standard box-mounting may not apply. |
| 2003 - 2004 | Mazda B2300 | Extended Cab Pickup | 6' Bed | — |
| 2001 - 2009 | Mazda B2300 | Standard Cab Pickup | 6' Bed | — |
| 1998 - 2000 | Mazda B2500 | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2001 | Mazda B2500 | Standard Cab Pickup | 6' Bed | — |
| 2000 - 2007 | Mazda B3000 | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2007 | Mazda B3000 | Standard Cab Pickup | 6' Bed | — |
| 2000 - 2009 | Mazda B4000 | Extended Cab Pickup | 6' Bed | — |
| 2000 - 2004 | Nissan Frontier | Crew Cab Pickup | 4'8" Bed | — |
| 2002 - 2004 | Nissan Frontier | Crew Cab Pickup | 6'3" Bed | — |
| 1998 - 2001 | Nissan Frontier | Standard Cab Pickup | 6'5" Bed | — |
Yes, the UWS Gloss Black Aluminum 60" Truck Tool Box with Low Profile (Heavy Packaging) EC10232 (Part #BHSGEC10232) is designed to fit the 2023-2026 Chevrolet Colorado.
The UWS Gloss Black Aluminum 60" Truck Tool Box with Low Profile (Heavy Packaging) EC10232 (Part #BHSGEC10232) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
The UWS Gloss Black Aluminum 60" Truck Tool Box with Low Profile (Heavy Packaging) EC10232 (Part #BHSGEC10232) fits the following vehicles: 2023-2026 Chevrolet Colorado; 1994-2003 Chevrolet S10; 2023-2026 GMC Canyon; 1994-2003 GMC Sonoma; 2006-2014 Honda Ridgeline; 2009-2010 Hummer H3T; 2001-2009 Mazda B2300; 2000-2001 Mazda B2500; 2000-2007 Mazda B3000; 2000-2009 Mazda B4000; 1998-2004 Nissan Frontier. Always verify your specific year, make, and model before ordering.
The UWS Gloss Black Aluminum 60" Truck Tool Box with Low Profile (Heavy Packaging) EC10232 (Part #BHSGEC10232) fits 2023-2026 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Gloss Black Aluminum 60" Truck Tool Box with Low Profile (Heavy Packaging) EC10232 (Part #BHSGEC10232) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one crossover truck tool box, one key, two rail pads, two 3" J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is not included with all models. Representative product photos are shown in the manual, though your specific box may vary in style, size or finish.
The tool box is designed to fit crossover-style truck beds with accessible bed rails. Before purchasing, verify that your truck bed has the rail configuration shown in the installation manual. The manual does not specify minimum or maximum bed widths, cab styles, or other vehicle-specific compatibility details. Contact the manufacturer or your dealer for fitment confirmation for your specific truck model.
Yes. Before installation, place the tool box in the truck bed and check clearance with the lid open to ensure there is adequate space between the open lid, top and back of the cab. This check must be performed before final tightening of hardware. Insufficient clearance may prevent the lid from opening fully or cause damage to the cab.
You will need a ratchet, socket set, and tape measure. The manual rates the installation difficulty as Easy.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. The tool box should be positioned so that when the lid is open, there is clearance between the open lid, top and back of the cab. The rail pads (adhesive side) attach to the underside of the tool box ends, and the tool box then sits on top of the truck bed rails.
Attach the adhesive side of the rail pads to the underside of the tool box ends. Once adhered, place the tool box with the rail pads on top of the truck bed rails. The pads help position and stabilize the tool box on the rails.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side of the vehicle. Attach with a 1/4" washer and 1/4" nut. Snug the hardware initially but do not fully tighten until after you have re-measured to ensure the tool box is centered and allows lid clearance when open. Then fully tighten all hardware.
Tighten in stages. First, snug the washer and nut on each J-hook but do not fully tighten. After snugging both sides, re-measure to ensure the tool box is centered and allows lid clearance when open. Once confirmed, fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline. If you purchase replacement hardware, use the torque specifications provided with that hardware. Proper torque helps prevent damage to the product or vehicle.
The manual does not explicitly state whether drilling is required or optional. The installation uses adhesive rail pads and J-hooks that attach under the bed rail lip. However, the manual includes a warning to check under the truck bed before drilling to ensure you do not puncture brake lines, fuel lines, electrical wires or fuel tanks. Contact the manufacturer or your dealer to confirm whether drilling is necessary for your specific truck bed configuration.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, including gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
The manual states: Never exceed the vehicle manufacturer's recommended capacity. The specific weight capacity of the tool box is not provided in the manual. Contact the manufacturer or your dealer for the maximum load rating.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the tool box lid and verify there is clearance between the open lid, top and back of the cab. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance. Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
Tool boxes come with adjustable strikers. If the strikers are ever out of alignment, simply loosen, adjust and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
The divider tray is not included with all models. Check your parts list or contact the manufacturer to confirm whether your specific EC10232 includes a divider tray.
The EC10232 is designed for crossover-style truck beds with accessible bed rails. Verify your truck bed configuration matches the manual before purchasing. Contact the manufacturer for specific vehicle compatibility.
You need a ratchet, socket set, and tape measure. Installation is rated as Easy.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline; if purchasing replacement hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives, hazardous materials or hazardous waste, including gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches.
Ensure all hardware is firmly secured before every trip. Periodically re-tighten and inspect all components for wear, corrosion and fatigue. Lubricate strikers and locks regularly.
Yes. The product can reduce visibility through rear and side windows. Extra precaution should be taken when driving.
On Sale Today
Original price was $834.95. Current price is $757.95.You save $77.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
