Our in-house experts typically reply within one business day.
UWS
On Sale Today
Original price was $834.95. Current price is $757.95.You save $77.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Tue, Aug 11 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability (NOTE: This product is heavily packaged for parcel shipping).
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
The UWS Gloss Black Aluminum 63" Truck Tool Box with Low Profile (Heavy Packaging) EC10342 (Part #BHSGEC10342) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
The UWS Gloss Black Aluminum 63" Truck Tool Box with Low Profile (Heavy Packaging) EC10342 (Part #BHSGEC10342) fits 2019-2022 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Gloss Black Aluminum 63" Truck Tool Box with Low Profile (Heavy Packaging) EC10342 (Part #BHSGEC10342) fits the following vehicles: 2019-2022 Chevrolet Colorado; 1997-2010 Dodge Dakota; 2001-2005 Ford Explorer Sport Trac; 1998-2026 Ford Ranger; 2019-2022 GMC Canyon. Always verify your specific year, make, and model before ordering.
Yes, the UWS Gloss Black Aluminum 63" Truck Tool Box with Low Profile (Heavy Packaging) EC10342 (Part #BHSGEC10342) is designed to fit the 2019-2022 Chevrolet Colorado.
The UWS Gloss Black Aluminum 63" Truck Tool Box with Low Profile (Heavy Packaging) EC10342 (Part #BHSGEC10342) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one crossover truck tool box, one divider tray (not included with all models), two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A key is also provided. Note that the divider tray may not be included depending on the model purchased.
The tool box is designed for truck beds with rails. The manual does not specify which truck models or bed styles are compatible. Before purchasing, verify that your truck has accessible bed rails and measure your truck bed to ensure the tool box will fit and allow the lid to open with clearance to the cab. Contact the manufacturer at 877-287-8634 or consult your dealer for specific fitment information.
The tool box uses adhesive rail pads and J-hook fasteners that attach under the truck bed rails without drilling. However, if you choose to drill, you must first check under your truck to ensure the drill location does not puncture brake lines, fuel lines, electrical wires, fuel tanks or other components. If drilling is necessary, treat or seal all fasteners and exposed metal in drilled holes to prevent corrosion.
You will need a ratchet, socket set, and tape measure. These are the only tools listed as required for installation.
The installation is rated as 'Easy' difficulty and can be completed with basic hand tools. The manual does not indicate that professional installation is required or that additional people or lifting equipment are needed.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Before securing it, open the lid and check that there is adequate clearance between the open lid and the top and back of the cab. The adhesive rail pads should be attached to the underside of the tool box ends and placed on top of the truck bed rails.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one J-hook assembly on each side of the vehicle. Attach with a 1/4" washer and 1/4" nut. Snug the hardware but do not fully tighten initially. After re-measuring to ensure the tool box is centered and the lid has proper clearance, fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline. If you purchase replacement hardware, use the torque specifications provided with that hardware instead.
The tool box comes with adjustable strikers. If they become misaligned, simply loosen them, adjust to the correct position, and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the lid and verify there is adequate clearance to the cab. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
Use mild automotive detergent to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Periodically lubricate the strikers and locks, and treat or seal all fasteners and exposed metal in any drilled holes to prevent corrosion.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify the tool box's own weight capacity; refer to your vehicle's documentation for load limits.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. After drilling, treat or seal all fasteners and exposed metal in the holes to prevent corrosion.
No. Never modify this product. Use it only for the purposes for which it was designed. If you have questions regarding the installation, operation, use and limits of the product, consult your dealer.
The tool box is designed for truck beds with rails. Verify your truck has accessible bed rails and measure your bed to ensure the tool box fits with lid clearance to the cab. Contact the manufacturer at 877-287-8634 for specific fitment confirmation.
You need a ratchet, socket set, and tape measure. No drilling or special equipment is required.
No. The tool box uses adhesive rail pads and J-hook fasteners that attach under the truck bed rails without drilling. If you choose to drill, check under your truck first to avoid puncturing brake lines, fuel lines, or electrical wires.
Torque 1/4" bolts to 3 ft-lbs. This is a general guideline; if you purchase replacement hardware, use the torque specifications provided with that hardware.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
Do not store flammables, explosives, hazardous materials or hazardous waste such as gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks or cutting torches. Danger of explosion.
13 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2019 - 2022 | Chevrolet Colorado | Crew Cab Pickup | 5'2" Bed | — |
| 2005 - 2008 | Dodge Dakota | Extended Cab Pickup | 5'5" Bed | — |
| 1997 - 2004 | Dodge Dakota | Standard Cab Pickup | 6'6" Bed | — |
| 2009 - 2010 | Dodge Dakota | Crew Cab Pickup | 6'7" Bed | — |
| 2001 - 2005 | Ford Explorer Sport Trac | Crew Cab Pickup | 4'2" Bed | — |
| 2019 - 2026 | Ford Ranger | Crew Cab Pickup | 5'1" Bed | — |
| 1998 - 2005 | Ford Ranger | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2005 | Ford Ranger | Standard Cab Pickup | 6' Bed | — |
| 2006 - 2011, 2019 - 2023 | Ford Ranger | Extended Cab Pickup | 6'1" Bed | — |
| 2006 - 2011 | Ford Ranger | Standard Cab Pickup | 6'1" Bed | — |
| 1998 - 2005 | Ford Ranger | Standard Cab Pickup | 7' Bed | — |
| 2006 - 2011 | Ford Ranger | Standard Cab Pickup | 7'1" Bed | — |
| 2019 - 2022 | GMC Canyon | Crew Cab Pickup | 5'2" Bed | — |
No reviews have been added for this product.
