B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 600 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 6,000 LB |
| Weight Distribution (WD) | n/a |
| Weight Distribution Tongue Weight (WDTW) | n/a |
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Round |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2014 | Chevrolet Tahoe | Police package |
The manual indicates a gross load capacity of 6,000 lbs. trailer weight and 600 lbs. tongue weight when used as a weight-carrying hitch. The hitch weight is listed in the manual specifications. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
Yes, the Curt 13161 is designed for the Chevrolet Tahoe PPV. The manual confirms this application. If you have a different model year or variant, contact Curt Manufacturing technical support at 1-877-287-8634 to verify fitment.
You will need: a 21mm socket, a ratchet, a torque wrench, and safety glasses. Spray lubricant is also recommended for cleaning the weldnuts before installation.
The hitch includes 6 M14x2 high-strength cap screws (HHCS) in grade 10.9 with zinc plating, and 6 conical washers (S-CON, 9/16 inch). These bolt into existing weldnuts on your vehicle's frame rails. No additional fasteners are required for installation.
Yes. If present, remove the 6 existing bolts from both frame rails and discard them. Clean the weldnuts with spray lubricant and a small wire brush before installing the new M14 bolts.
1. Remove any existing bolts from both frame rails and discard them. Clean the weldnuts with spray lubricant and a small wire brush. 2. Lift the hitch into place and install the 6 M14 bolts with conical washers as shown in the manual. 3. Torque all M14 fasteners to 150 lb.-ft.
No. The manual explicitly states 'NO DRILLING REQUIRED'. The hitch uses existing weldnuts on your vehicle's frame rails.
All M14 fasteners must be torqued to 150 lb.-ft. Use a calibrated torque wrench to ensure proper tightness and avoid over-tightening.
Non-trailer loads are not recommended without additional support. The manual states: 'ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.' Failure to properly support non-trailer loads will void the product warranty.
The hitch has a gross load capacity of 6,000 lbs. trailer weight and 600 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Always check your vehicle's owner's manual for the maximum safe towing limit.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain the integrity and safety of the installation.
Curt Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. The warranty is voided by alteration, misuse, or improper installation.
The Curt 13161 is designed for the Chevrolet Tahoe PPV. For other vehicles, contact Curt technical support at 1-877-287-8634.
No drilling is required. The hitch bolts into existing weldnuts on your vehicle's frame rails.
You need a 21mm socket, ratchet, torque wrench, and safety glasses. Spray lubricant is recommended for cleaning weldnuts.
All M14 fasteners must be torqued to 150 lb.-ft.
The hitch supports 6,000 lbs. trailer weight and 600 lbs. tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer loads must be supported by Curt 18050 stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $444.80. Current price is $434.94.You save $9.86
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$888.74$1,041.60
No reviews have been added for this product.