B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 400 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 4,000 LB |
| Weight Distribution (WD) | n/a |
| Weight Distribution Tongue Weight (WDTW) | n/a |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2015 | Lincoln MKX | Fits beneath factory 1: 1/4" receiver |
The 07 - 15 Lincoln MKX Fits beneath factory 1-1/4" receiver 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1744 (Part #HWA1744) fits the following vehicles: 2007-2015 Lincoln MKX. Always verify your specific year, make, and model before ordering.
The 07 - 15 Lincoln MKX Fits beneath factory 1-1/4" receiver 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1744 (Part #HWA1744) fits 2007-2015 Lincoln MKX models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 07 - 15 Lincoln MKX Fits beneath factory 1-1/4" receiver 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1744 (Part #HWA1744) is designed to fit the 2007-2015 Lincoln MKX.
The 07 - 15 Lincoln MKX Fits beneath factory 1-1/4" receiver 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1744 (Part #HWA1744) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 13067 fits Ford Edge and Lincoln MKX models. However, it is specifically designed for Edge Sport with fascia trimming. Fascia trimming may be required on Edge Sport, and the manual does not confirm fitment on other Edge trim levels or MKX variants without additional modifications. Verify your vehicle's trim level and year before purchasing.
Fascia trimming may be required on Edge Sport. The manual includes a fascia trim diagram with specific dimensions (8.000 in. wide, 2.50 in. height, 4.00 in. offset) for Edge Sport. If your vehicle is an Edge Sport, plan for fascia trimming. The manual does not specify whether trimming is required on other trim levels or the Lincoln MKX.
The kit includes: 2× 1/2-13 UNC 1-3/4" grade 8 carriage bolts (part 10-10272), 4× 1/2-13 UNC 1-1/2" grade 8 carriage bolts (part 10-10287), 6× 1/2-13 UNC serrated flange nuts (part 20-00062), 6× 0.250 × 1.25 × 3.00" square hole spacers (part CM-SP19), and 4× 1/2" fishwire (part 1_2 FISHWIRE).
Required tools are: ratchet, torque wrench, 6" socket extension, 3/4" socket, 8mm socket, flat head screwdriver, drill with 17/32" drill bit, tin snips, and wire. The wire is used to hold the exhaust up during installation to prevent damage.
Yes. Step 1 requires lowering the exhaust by removing the rear 3 exhaust hangers. You may need to use wire to hold the exhaust up high enough to prevent damage during installation. The exhaust is reinstalled in Step 8 after the hitch is secured.
Remove the heat shield from both sides of the vehicle by removing 3× 6mm bolts and 1× black plastic plug from each side. The driver side heat shield is also connected to the rear wiring harness by a plastic plug—disconnect this. After removal, trim off the tab from both driver and passenger side heat shields. Reattach the heat shield without the screws in the frame rails; it will be sandwiched between the vehicle frame rails and hitch.
Yes. Drilling is required. In Step 5, you must drill the rear holes of the hitch on both sides using a 17/32" drill bit. The hitch is used as a template for hole placement.
Drilling the frame rails (17/32" holes in Step 5) is permanent. Heat shield tab trimming is permanent. Fascia trimming on Edge Sport (per the trim diagram) is permanent. The exhaust lowering and heat shield removal are reversible. Factory bolts are not reused and should not be reinstalled.
All 1/2" hardware must be torqued to 110 lb-ft. This is applied in Step 7 after all fasteners are installed and the hitch is in position.
The gross load capacity when used as a weight-carrying hitch is 4,000 lbs. trailer weight and 400 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Fishwire is a method of threading fasteners through existing holes without drilling new ones at that stage. In Steps 3 and 6, you thread 1/2-13 carriage bolts with CM-SP19 spacers through the rear of bumper mounts and into holes in the frame rails using the fishwire hardware, then secure with 1/2" flange nuts. The manual includes a Fishwire Technique Diagram for reference.
1. Fishwire 1/2-13 × 1-1/2" carriage bolts with spacers through rear bumper mounts to frame rail holes, secure with flange nuts (Step 3). 2. Raise hitch into position and secure with 1/2" flange nuts (Step 4). 3. Drill rear holes of hitch using 17/32" drill bit (Step 5). 4. Fishwire 1/2-13 × 1-3/4" carriage bolt and spacer through bumper mounts, attach with flange nuts (Step 6). 5. Torque all 1/2" hardware to 110 lb-ft (Step 7).
No. The manual explicitly states 'DO NOT REINSTALL FACTORY BOLTS.' Use only the hardware provided in the kit.
The hitch has a gross load capacity of 4,000 lbs. trailer weight and 400 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating. Always follow your vehicle's towing limits.
After installation, verify that all fasteners are tight and all structural components are sound. The manual recommends periodically checking the receiver hitch to ensure all fasteners remain tight and structural integrity is maintained.
The manual recommends periodically checking the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. No specific interval is provided; establish a regular maintenance schedule based on your towing frequency and vehicle use.
Yes, it fits Ford Edge and Lincoln MKX. It is specifically designed for Edge Sport with fascia trimming. Verify your trim level and year before purchasing.
Yes. You must drill 17/32" holes in the rear of the hitch frame rails using the hitch as a template. Heat shield tab trimming and fascia trimming on Edge Sport are also required.
Ratchet, torque wrench, 6" socket extension, 3/4" socket, 8mm socket, flat head screwdriver, drill with 17/32" drill bit, tin snips, and wire.
All 1/2" hardware must be torqued to 110 lb-ft in Step 7 after installation.
Periodically check that all fasteners are tight and structural components are sound. No specific maintenance interval is provided.
On Sale Today
Original price was $475.80. Current price is $364.99.You save $110.81 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$873.79$1,153.55
No reviews have been added for this product.