B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2017 BMW X3
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 3,500 LB |
| Weight Distribution (WD) | 4,000 LB |
| Weight Distribution Tongue Weight (WDTW) | 400 LB |
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2017 | BMW X3 | — |
The 11 - 17 BMW X3 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA167 (Part #HWA167) fits 2011-2017 BMW X3 models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 11 - 17 BMW X3 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA167 (Part #HWA167) is designed to fit the 2011-2017 BMW X3.
The 11 - 17 BMW X3 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA167 (Part #HWA167) fits the following vehicles: 2011-2017 BMW X3. Always verify your specific year, make, and model before ordering.
The 11 - 17 BMW X3 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA167 (Part #HWA167) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The part number is 13316.
Yes, part number 13316 fits BMW X3 models from 2011 to present.
Yes, part number 13316 fits BMW X4 models from 2016 to present.
The hitch weight is 180 lbs.
When used as a weight carrying hitch, the gross load capacity is 3,500 lbs. trailer weight and 350 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
When used as a weight distribution hitch, the gross load capacity is 4,000 lbs. trailer weight and 400 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
No, drilling is not required. The hitch uses existing M12 threaded studs on the vehicle for attachment.
Required tools are: plastic rivet gun, 8mm, 10mm, and 18mm sockets, ratchet, flat head screwdriver, torque wrench, tape measure, rotary cutting tool, small punch, and safety glasses.
The kit includes 16 M6 black rivets (part number 10-10401) for reinstalling wheel well trim. The M12 nuts that secure the hitch to the vehicle are existing factory hardware that are removed during bumper removal and reused for hitch installation.
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required.
The installation difficulty level is rated as Challenging. The manual notes that if you are hesitant to undertake this task on your own, you should contact an authorized Curt installer for additional assistance.
Yes, trimming is required. You must trim the underbody panel according to the trim diagram (approximately 5 1/8 inches by 3 1/2 inches) and trim an approximate 3/8 inch wide by 7/8 inch deep slot into each inner plastic body to allow for hitch side plate clearance.
All M12 hardware must be torqued to 86 ft-lbs.
Yes, bumper removal is required. The installation process requires removal of the underbody panel, bumper cover fasteners, wheel well trim, tail lights, reflectors, inner plastic bodies, and the bumper beam assembly before the hitch can be installed.
Most models require removal of 11 fasteners from the underbody panel. However, some models may require removal of only 9 fasteners.
Seven rivets must be removed from the wheel well trim from above each rear tire. To remove them, push the small center rod through the rivet with a small punch or equivalent tool, pry the rivets from the trim, and pop the trim off. Replacement rivets are included in the kit.
Yes, both tail lights must be removed. Pop off the plastic covers inside each tail light, remove the 2 nuts from each tail light, unplug the lights, and remove them. After hitch installation, they are reinstalled in reverse order.
The M12 nuts removed from the bumper beam assembly threaded studs in Step 11 are reused to secure the hitch to the vehicle in Step 12.
Remove the underbody panel, then remove fasteners from the bumper cover bottom and wheel wells, remove wheel well trim rivets, remove additional bumper cover fasteners, pop off tail light covers, remove and unplug tail lights, remove fasteners under tail lights, pop off reflectors and remove fasteners under them, then carefully remove the bumper cover by popping the sides off first and pulling straight back.
Reinstall the bumper cover and tail lights by reassembling all components removed in Steps 2-10 in reverse order. A plastic rivet gun is required to fasten the supplied M6 rivets when reinstalling the wheel well trim.
Raise the underbody panel into position and mark the center using the hitch as a guide. Trim the underbody panel according to the trim diagram on the manual, which shows dimensions of 5 1/8 inches by 3 1/2 inches. Reinstall the underbody panel and discard the extra fastener.
You must not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself has a weight carrying capacity of 3,500 lbs. trailer weight and 350 lbs. tongue weight, or 4,000 lbs. trailer weight and 400 lbs. tongue weight when used as a weight distribution hitch, but your vehicle's limits take precedence.
Safety glasses must be worn at all times while installing this product. Read all instructions thoroughly before beginning installation.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
The manual states to periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound, but does not specify an exact inspection interval.
Yes, the Curt 13316 fits BMW X3 (2011-present) and BMW X4 (2016-present). Do not exceed your vehicle manufacturer's recommended towing capacity.
You need a plastic rivet gun, 8mm/10mm/18mm sockets, ratchet, flat head screwdriver, torque wrench, tape measure, rotary cutting tool, small punch, and safety glasses.
All M12 hardware must be torqued to 86 ft-lbs.
Installation is rated as Challenging and requires bumper removal, underbody panel trimming, and inner plastic body modification. Two people may be required. If hesitant, contact an authorized Curt installer.
Weight carrying: 3,500 lbs. trailer / 350 lbs. tongue. Weight distribution: 4,000 lbs. trailer / 400 lbs. tongue. Do not exceed your vehicle manufacturer's recommended towing capacity.
Never exceed your vehicle manufacturer's recommended towing capacity. Wear safety glasses at all times during installation.
On Sale Today
Original price was $460.80. Current price is $353.99.You save $106.81 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 19 - Sat, Aug 22
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$824.79$1,080.55
No reviews have been added for this product.