14-19 Nissan Versa Sedan CURT 4-flat Plug and Play Trailer WiringCURTOriginal price was $118.90. Current price is $114.76.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P1,P2 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2014 - 2018 | Nissan Versa | Sedan |
The 14-18 Nissan Versa Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2082) fits the following vehicles: 2014-2018 Nissan Versa. Always verify your specific year, make, and model before ordering.
Yes, the 14-18 Nissan Versa Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2082) is designed to fit the 2014-2018 Nissan Versa.
The 14-18 Nissan Versa Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2082) fits 2014-2018 Nissan Versa models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The 14-18 Nissan Versa Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2082) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56185 is designed specifically for the Nissan Versa Sedan. The installation accesses the vehicle's wiring harness connectors behind the taillight housing in positions P1 and P2.
Yes, you must disconnect the negative battery terminal before beginning installation. This is done in Step 2, after accessing the wiring harness connectors.
You must remove: all trunk floor coverings, two plastic push fasteners and two 10mm screws from the rear scuff panel, the rear scuff panel itself, plastic push fasteners holding the felt trunk liner, and the two 10mm nuts holding the taillight housing in place. This exposes the taillight wiring harness connectors.
Remove the grommet that the taillight wiring harness passes through. Make a cut in the grommet from the middle outwards large enough to pass the T-Connector housings through. Route the T-Connector end with the yellow wire from inside the vehicle through the grommet's hole, pass the housings through the grommet, and reinstall the grommet back into the vehicle.
Insert the T-Connector end with the yellow wire between the separated housings. Make sure the housings are fully inserted with locking tabs in place. Take care not to damage the locking tabs when separating or reconnecting the connectors.
Locate a flat spot inside the vehicle and adhere the black converter box using the double-sided tape provided. The manual does not specify a particular location, only that it should be mounted on a flat surface.
Locate a suitable grounding point near the converter box, such as an existing screw with nut in the vehicle's frame, or drill a 3/32" pilot hole for the provided screw. Clean the ground area from any rust, dirt or paint. Secure the white ground wire using the ring terminal and screw provided.
Drilling may be required. You must locate a suitable grounding point near the converter box. If an existing screw with nut is not available in the vehicle's frame, you will need to drill a 3/32" pilot hole for the provided grounding screw. Before drilling, verify that miscellaneous items hidden behind or under surfaces will not be damaged.
Yes. After completing Steps 4 through 7 on the driver's side with the yellow wire T-Connector, you must repeat the same steps on the passenger side using the T-Connector end with the green wire. Use the provided cable ties to secure any loose wires.
Route the 4-flat out from under the felt trunk liner to the center of the vehicle when in use. Roll up and store in an out of the way location when not in use.
The product has the following maximum load ratings: Signal Circuits: 3.0 Amps; Tail/Running Light Circuits: 7.5 Amps. Do not exceed the product's load rating or the tow vehicle's lamp load rating, whichever is lower. Exceeding the load rating can cause loss of warranty, overheating and potentially fire. Check the vehicle owner's manual or contact the vehicle's manufacturer for the tow vehicle's lamp load rating.
The kit includes: a T-Connector harness with yellow and green wire ends, a black converter box, double-sided tape for mounting the converter box, a white ground wire with ring terminal and screw for grounding, and cable ties for securing loose wires.
Yes, the Curt 56185 is designed for the Nissan Versa Sedan.
Yes, disconnect the negative battery terminal before starting installation.
Signal Circuits: 3.0 Amps; Tail/Running Light Circuits: 7.5 Amps. Do not exceed these ratings or the tow vehicle's lamp load rating, whichever is lower, to avoid overheating and fire.
Yes, you must remove the two 10mm nuts holding the taillight housing in place to access the vehicle's taillight wiring harness connectors.
Yes, you must install T-Connector ends on both the driver's side (yellow wire) and passenger side (green wire) of the vehicle.
On Sale Today
Original price was $92.90. Current price is $87.76.You save $5.14 (6%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$163.71$168.85
No reviews have been added for this product.
