B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2014 - 2019 Jeep Cherokee
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 750 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 5,000 LB |
| Weight Distribution (WD) | 6,000 LB |
| Weight Distribution Tongue Weight (WDTW) | 750 LB |
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2014 - 2019 | Jeep Cherokee | — |
The 14 - 19 JEEP Cherokee 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1531 (Part #HWA1531) fits the following vehicles: 2014-2019 Jeep Cherokee. Always verify your specific year, make, and model before ordering.
Yes, the 14 - 19 JEEP Cherokee 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1531 (Part #HWA1531) is designed to fit the 2014-2019 Jeep Cherokee.
The 14 - 19 JEEP Cherokee 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1531 (Part #HWA1531) fits 2014-2019 Jeep Cherokee models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
The 14 - 19 JEEP Cherokee 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1531 (Part #HWA1531) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 13171 fits all Jeep Cherokee models from 2014 to present, including Trailhawk variants.
When used as a weight-carrying hitch, the Curt 13171 supports a maximum trailer weight of 5,000 lbs and tongue weight of 750 lbs. When used as a weight-distribution hitch, it supports a maximum trailer weight of 6,000 lbs and tongue weight of 750 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity.
The hitch weight is 48 lbs.
You will need a ratchet, sockets in 3/4", 8mm, and 21mm sizes, a 6" socket extension, and a torque wrench. A 10mm socket is also required for Trailhawk models to remove the plastic fascia panel screws. Safety glasses should be worn at all times during installation.
No, drilling is not required. The hitch uses existing frame rail holes accessed through square rubber plugs on each side of the frame.
Temporary plastic fascia removal is required only for Trailhawk models. Remove the 4 screws from the bottom of the panel using a 10mm socket, push on the tabs to unclip, and set aside for reassembly. Non-Trailhawk Cherokee models do not require fascia removal.
Two people may be required to ease installation, though the manual does not specify whether a second person is mandatory or optional.
1. For Trailhawk models, temporarily remove the plastic fascia panel by removing 4 screws with a 10mm socket and unclipping tabs. 2. Examine vehicle frame rails and unfasten any wire present by pulling the retainer out; remove square rubber plugs on each side to expose access holes. 3. Use fishwire to route rear and side mounting hole hardware through the access holes; use reverse fishwire for remaining hardware (both sides). For Trailhawk models, use only reverse fishwire hardware and the vehicle's M14 bolts. 4. Raise the hitch from in front of the exhaust into position, being careful not to push hardware back inside the frame; loosely secure with mounting hardware to align all holes before final tightening. 5. Resecure any wire to the vehicle frame rail as needed. 6. For Trailhawk models, clip the plastic fascia panel back into place and secure with 4 screws.
Torque all 1/2" hardware to 110 lb-ft. For Trailhawk models, torque all M14 hardware to 139 lb-ft.
Loosely secure the hitch with mounting hardware first to align all holes, then tighten them. This ensures proper alignment before final torquing.
Seam foam may need to be trimmed for proper mounting plate fit, but the manual does not specify the exact location or extent of trimming required.
The kit includes 6 serrated-flange nuts (1/2-13 UNC, Grade 8, YZ), 6 carriage bolts (1/2-13 UNC, 1-1/2", Grade 8, YZ), 6 pieces of 1/2" fishwire, and 6 square hole spacers (.250 x 1.00 x 3.00"). For Trailhawk models, the installation also uses the vehicle's existing M14 bolts.
Return the square rubber plugs to the vehicle owner after installation.
If wire is present on either side frame rail, unfasten it by pulling the retainer out of the frame and temporarily let it hang loose below the frame rail. After installation, resecure the wire to the vehicle frame rail as needed.
Safety glasses should be worn at all times while installing this product. Read all instructions thoroughly before beginning installation. Use proper tools to improve installation quality and reduce time required.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a retorque interval or maintenance schedule beyond this periodic inspection.
Curt Manufacturing LLC warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. Curt's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, the Curt 13171 fits all Jeep Cherokee models from 2014 to present, including Trailhawk variants.
No drilling is required. The hitch uses existing frame rail holes accessed through square rubber plugs.
You need a ratchet, 3/4", 8mm, and 21mm sockets, a 6" socket extension, a torque wrench, and a 10mm socket for Trailhawk models. Safety glasses are required.
Torque all 1/2" hardware to 110 lb-ft. For Trailhawk models, torque all M14 hardware to 139 lb-ft.
As a weight-carrying hitch: 5,000 lbs trailer weight, 750 lbs tongue weight. As a weight-distribution hitch: 6,000 lbs trailer weight, 750 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Temporary fascia removal is required only for Trailhawk models. Remove 4 screws with a 10mm socket, unclip tabs, and set aside for reassembly.
Wear safety glasses at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. Read all instructions thoroughly before beginning.
Seam foam may need to be trimmed for proper mounting plate fit. Trim as necessary to allow the mounting plate to sit flush against the frame.
Use care when raising the hitch up from in front of the exhaust into position to avoid pushing hardware back inside the frame. If this occurs, use the fishwire or reverse fishwire to retrieve and reposition the hardware through the access holes.
On Sale Today
Original price was $467.80. Current price is $358.99.You save $108.81 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 31 - Thu, Sep 3
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$874.22$1,140.55
No reviews have been added for this product.