B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 525 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 3,500 LB |
| Weight Distribution (WD) | n/a |
| Weight Distribution Tongue Weight (WDTW) | n/a |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2022 | Kia Niro | Excluding plug: in and EV models |
The 17 - 22 KIA Niro Excluding plug-in and EV models 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1599 (Part #HWA1599) fits 2017-2022 Kia Niro models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 17 - 22 KIA Niro Excluding plug-in and EV models 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1599 (Part #HWA1599) is designed to fit the 2017-2022 Kia Niro.
The 17 - 22 KIA Niro Excluding plug-in and EV models 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1599 (Part #HWA1599) fits the following vehicles: 2017-2022 Kia Niro. Always verify your specific year, make, and model before ordering.
The 17 - 22 KIA Niro Excluding plug-in and EV models 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA1599 (Part #HWA1599) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the CURT 13329 is designed for 2017-present Kia Niro CUVs. This is a weight-carrying hitch with a maximum trailer weight capacity of 3,500 lbs. and a tongue weight capacity of 525 lbs. Always verify that your vehicle's towing capacity meets or exceeds these limits before towing.
Yes. The CURT 13329 is compatible with 2017-present Kia Niro models, which includes 2020 and later model years.
The CURT 13329 is rated for a maximum trailer weight of 3,500 lbs. and a tongue weight of 525 lbs. when used as a weight-carrying hitch. You must not exceed your vehicle manufacturer's recommended towing capacity.
You will need: a ratchet, torque wrench, 6-inch socket extension, 12mm socket, 16mm socket, 11/16-inch socket, masking tape, aviation shears, and safety glasses. Proper tools will greatly improve the quality of the installation and reduce the time required.
No. The CURT 13329 requires no drilling. The hitch uses existing weld nuts on the frame rails and reverse fishwire hardware to secure the attachment points.
Yes. You must mark out and trim a 3-inch by 5-inch section of the plastic panel using masking tape and aviation shears. The manual instructs you to confirm the trim prior to reinstallation. This is a permanent modification to the vehicle's plastic panel.
You will need to temporarily lower the exhaust. This is done by removing 4 bolts securing the metal exhaust guard using a 12mm socket, and then removing 3 rubber exhaust isolators (one on the driver side, one on the passenger side, and one in the center). The exhaust guard bolts should be returned to the customer. The exhaust is then reinstalled after the hitch is secured.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
1. Remove the 4 bolts securing the metal exhaust guard and lower the exhaust by removing 3 rubber isolators. 2. Remove plastic push pins and nuts, then trim a 3" × 5" section of the plastic panel. 3. Remove rubber plugs from each frame rail and reverse fishwire the 7/16" carriage bolts and spacers through the access holes. 4. Raise the hitch into position and feed fishwires through the center hole, then loosely secure with 7/16" hex flange nuts. 5. Install the 4 M10-1.25 hex bolts and 4 conical tooth washers (2 on each side). 6. Torque all hardware and reinstall the exhaust and plastic panel in reverse order.
Torque all M10-1.25 hex bolts to 45 ft-lbs. Torque all 7/16-inch hex flange nuts to 59 ft-lbs. These fasteners are located on both sides of the hitch.
The kit includes: 4 M10×1.25 hex cap screws (part 10-10271), 4 conical tooth washers 3/8-inch (part 30-00148), 2 7/16-inch carriage bolts (part 10-10281), 2 7/16-inch serrated flange nuts (part 20-00103), 2 square hole spacers 0.250 × 0.88 × 2.25 inches (part CM-SP2), and 2 pieces of 7/16-inch fishwire (part 7_16 FISHWIRE).
Reverse fishwire refers to feeding the 7/16-inch carriage bolts and CM-SP2 spacers through the access holes in the frame rails from the inside of the vehicle. The fishwire is a tool used to guide these fasteners through the frame rail access holes. After the hitch is positioned, the fishwires are removed and the bolts are secured with 7/16-inch hex flange nuts.
You should loosely secure the 7/16-inch hex flange nuts after feeding the fishwires through the center hole of the hitch (step 4). Then install the M10-1.25 hex bolts and conical tooth washers (step 5). Finally, torque all M10 hardware to 45 ft-lbs. and all 7/16-inch hardware to 59 ft-lbs. (step 6).
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify a retorque interval, so contact CURT technical support at 877-287-8634 for guidance on maintenance intervals.
Safety glasses must be worn at all times while installing this product. Read all instructions thoroughly before beginning installation. Never exceed your vehicle manufacturer's recommended towing capacity when using the hitch.
The installation is rated as moderate difficulty. Professional installation takes approximately 45 minutes. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Yes. The CURT 13329 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, the CURT 13329 is designed for 2017-present Kia Niro CUVs with a 3,500 lb. trailer weight and 525 lb. tongue weight capacity.
No drilling is required. The hitch uses existing weld nuts on the frame rails and reverse fishwire hardware.
Yes, you must trim a 3-inch by 5-inch section of the plastic panel using aviation shears and masking tape.
You need a ratchet, torque wrench, 6-inch socket extension, 12mm/16mm/11/16-inch sockets, masking tape, aviation shears, and safety glasses.
Torque M10-1.25 hex bolts to 45 ft-lbs. and 7/16-inch hex flange nuts to 59 ft-lbs.
You must temporarily lower the exhaust by removing 4 bolts from the metal guard and 3 rubber isolators, then reinstall after the hitch is secured.
Two people may be required to ease installation. Contact an authorized CURT installer if you need assistance.
On Sale Today
Original price was $415.80. Current price is $324.99.You save $90.81 (22%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$832.64$1,082.55
No reviews have been added for this product.