B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2024 Subaru Forester
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Not Applicable |
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Not Applicable |
| Tongue Weight (TW) | 350 LBS |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 3,500 LBS |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2024 | Subaru Forester | — |
The 19 - 24 Subaru Forester 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA2264 (Part #HWA2264) fits the following vehicles: 2019-2024 Subaru Forester. Always verify your specific year, make, and model before ordering.
The 19 - 24 Subaru Forester 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA2264 (Part #HWA2264) fits 2019-2024 Subaru Forester models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 19 - 24 Subaru Forester 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA2264 (Part #HWA2264) is designed to fit the 2019-2024 Subaru Forester.
The 19 - 24 Subaru Forester 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA2264 (Part #HWA2264) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 13459 trailer hitch has a gross trailer weight (GTW) capacity of 3,500 lbs and a tongue weight (TW) capacity of 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes. Installation requires removal and reinstallation of the rear bumper cover. The bumper must be removed to access the frame rail mounting points and to allow the hitch to be inserted into position before the bumper is reinstalled.
The installation requires lowering the muffler by removing the two rearmost rubber exhaust hangers to clear the hitch. You must support the exhaust to prevent damage during removal. The heat shield must also be removed and trimmed in the area marked 'M' to provide clearance.
Yes. The installation requires trimming of the rear bumper panel and fascia. You must cut a 3" × 8-1/2" opening and a 2-1/2" × 1-1/2" opening in the center of the bumper fascia to accommodate the hitch and allow clearance for towing.
Required tools are: ratchet, flathead screwdriver, Phillips screwdriver, torque wrench, 3/4" socket, 14mm socket, 17mm socket, socket extension (6"), metal snips, and safety glasses. A tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The kit includes: 4 hex bolts M10 × 1.25 × 40mm, 2 flange nuts M10 × 1.25, 4 conical tooth washers 7/16", 2 carriage bolts 1/2" - 13 × 2", 2 round hole washers 2" × 1-1/2" × 1/2", 2 square hole washers 1/4" × 1" × 2.5", 2 flange nuts 1/2" - 13, and 2 fishwire tools 1/2".
The installation difficulty is rated as Difficult. This rating is based on the time and effort involved and may vary depending on installer expertise, vehicle condition, and availability of proper tools and equipment.
Open the trunk and use a Phillips screwdriver to remove two retainers on the taillight cover on each side. Unplug the taillight connectors and remove the taillight bracket bolts. Remove and set aside the taillights. This provides access to the fascia panel.
Using a flathead screwdriver, remove seven plastic rivets in the fascia panel and one plastic rivet from the wheel well on each side (some trim levels may have three rivets on each side). Gently pull the fascia up from the rear wheel trim panel, working toward the taillights and along the bottom of the trunk. Once loose all around, slowly pull back the panel and unplug the rear bumper sensor.
The fishwire tool guides the hitch during mounting and prevents loss of bolts or spacers inside the frame rail. Insert the coiled end of the fishwire through the hitch mounting hole in the vehicle frame rail and out the access hole. Pass the coiled end through the spacer and thread the bolt into the coil. Kink the wire to keep the spacer separate from the bolt, then pull the fishwire, spacer, and bolt through the frame and out the mounting hole.
Remove the two rearmost rubber exhaust hangers to lower the muffler and provide clearance for the hitch. Be sure to support the exhaust to prevent damage during removal. If exhaust hanger removal pliers are not available, use a 5/8" open end wrench slid up to the rubber isolator, cradling the hanger rod. Place the flat edge of a pry bar between the wrench and the hanger stop or rod, then rotate the pry bar toward the wrench to remove the isolator. Using lubricant or soapy water on the hanger rod and isolator helps removal.
Using a 10mm socket, remove the four screws securing the heat shield. Remove the heat shield and trim off the area marked 'M' using metal snips. The heat shield is reinstalled after the hitch is mounted and the exhaust hangers are replaced.
No drilling is required. The hitch uses existing frame rail mounting holes and access holes. However, the installation does require trimming of the rear bumper panel and fascia. You must cut a 3" × 8-1/2" opening and a 2-1/2" × 1-1/2" opening in the center of the bumper fascia.
The 1/2" carriage bolts (#4) must be tightened to 110 ft-lbs using a torque wrench and 3/4" socket.
The bumper nuts on each side of the vehicle must be tightened to 33.4 lb-ft using a 14mm socket.
The bumper bolts must be tightened to 47.8 lb-ft using a 14mm socket.
Wear safety glasses at all times while installing this product. Support the exhaust system to prevent damage during removal of the rubber hangers. Never exceed your vehicle manufacturer's recommended towing capacity. The hitch has a gross trailer weight capacity of 3,500 lbs and tongue weight capacity of 350 lbs.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify an inspection interval; consult your vehicle manufacturer or a qualified technician for recommended inspection frequency.
You need a ratchet, flathead and Phillips screwdrivers, torque wrench, 3/4", 14mm, and 17mm sockets, 6" socket extension, metal snips, and safety glasses.
Yes, the rear bumper must be removed to access the frame rail mounting points and insert the hitch, then reinstalled.
Yes. You must trim the rear bumper panel and fascia, cutting a 3" × 8-1/2" opening and a 2-1/2" × 1-1/2" opening in the center of the bumper fascia. You must also trim the heat shield in the area marked 'M'.
Tighten 1/2" carriage bolts to 110 ft-lbs, bumper nuts to 33.4 lb-ft, and bumper bolts to 47.8 lb-ft. Use a torque wrench to ensure proper tightness.
Gross trailer weight capacity is 3,500 lbs and tongue weight capacity is 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $530.80. Current price is $399.99.You save $130.81 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$875.79$1,156.55
No reviews have been added for this product.